Tania Kjellerup Lind

Unraveling Dendrimer Translocation Across Cell Membrane Mimics

Poly(amidoamine) (PAMAM) dendrimers are promising candidates in several applications within the medical field. However, it is still to date not fully understood whether they are able to passively translocate across lipid bilayers. Recently, we used fluorescence microscopy to show that PAMAM dendrimers induced changes in the permeability of lipid membranes but the dendrimers themselves could not translocate to be released into the vesicle lumen. Because of the lack of resolution, these experiments could not assess whether the dendrimers were able to translocate but remained attached to the membrane. Using quartz crystal microbalance with dissipation monitoring and neutron reflectivity, a structural investigation was performed to determine how dendrimers interact with zwitterionic and negatively charged lipid bilayers. We hereby show that dendrimers adsorb on top of lipid bilayers without significant dendrimer translocation, regardless of the lipid membrane surface charge. Thus, most likely dendrimers are actively transported through cell membranes by protein-mediated endocytosis in agreement with previous cell studies. Finally, the higher activity of PAMAM dendrimers for phosphoglycerol-containing membranes is in line with their high antimicrobial activity against Gram-negative bacteria.

Composition and structure of mixed phospholipid supported bilayers formed by POPC and DPPC

In this paper we present a systematic study of the morphology and composition of supported lipid bilayers (SLBs) formed by vesicle fusion using a wide variety of surface sensitive techniques that give information about the lateral as well as vertical structure and bilayer fluidity. SLBs of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) mixtures at five different bulk vesicle compositions were formed in such a way that the phase separation boundaries were crossed. For all compositions studied, the SLBs were systematically enriched with POPC compared to the nominal vesicle composition. Nevertheless, gel-fluid domain coexistence was observed for SLB compositions in which phase separation was expected based on the bulk phase diagram. The probable causes for the compositional difference in the SLBs are discussed in terms of the phase behaviour of the mixture and its effect on the membrane formation process by vesicle fusion.

Formation of supported lipid bilayers by vesicle fusion: effect of deposition temperature.

We have investigated the effect of deposition temperature on supported lipid bilayer formation via vesicle fusion. By using several complementary surface-sensitive techniques, we demonstrate that despite contradicting literature on the subject, high-quality bilayers can be formed below the main phase-transition temperature of the lipid. We have carefully studied the formation mechanism of supported DPPC bilayers below and above the lipid melting temperature (Tm) by quartz crystal microbalance and atomic force microscopy under continuous flow conditions. We also measured the structure of lipid bilayers formed below or above Tm by neutron reflection and investigated the effect of subsequent cooling to below the Tm. Our results clearly show that a continuous supported bilayer can be formed with high surface coverage below the lipid Tm. We also demonstrate that the high dissipation responses observed during the deposition process by QCM-D correspond to vesicles absorbed on top of a continuous bilayer and not to a surface-supported vesicular layer as previously reported.

Continuous Flow Atomic Force Microscopy Imaging Reveals Fluidity and Time-Dependent Interactions of Antimicrobial Dendrimer with Model Lipid Membranes

In this paper, an amphiphilic peptide dendrimer with potential applications against multi-resistant bacteria such as Staphylococcus aureus was synthesized and studied on model cell membranes. The combination of quartz crystal microbalance and atomic force microscopy imaging during continuous flow allowed for in situ monitoring of the very initial interaction processes and membrane transformations on longer time scales. We used three different membrane compositions of low and high melting temperature phospholipids to vary the membrane properties from a single fluid phase to a pure gel phase, while crossing the phase coexistence boundaries at room temperature. The interaction mechanism of the dendrimer was found to be time-dependent and to vary remarkably with the fluidity and coexistence of liquid-solid phases in the membrane. Spherical micelle-like dendrimer-lipid aggregates were formed in the fluid-phase bilayer and led to partial solubilization of the membrane, while in gel-phase membranes, the dendrimers caused areas of local depressions followed by redeposition of flexible lipid patches. Domain coexistence led to a sequence of events initiated by the formation of a ribbon-like network and followed by membrane solubilization via spherical aggregates from the edges of bilayer patches. Our results show that the dendrimer molecules were able to destroy the membrane integrity through different mechanisms depending on the lipid phase and morphology and shed light on their antimicrobial activity. These findings could have an impact on the efficacy of the dendrimers since lipid membranes in certain bacteria have transition temperatures very close to the host body temperature.

Formation and Characterization of Supported Lipid Bilayers Composed of Hydrogenated and Deuterated Escherichia coli Lipids.

Supported lipid bilayers are widely used for sensing and deciphering biomolecular interactions with model cell membranes. In this paper, we present a method to form supported lipid bilayers from total lipid extracts of Escherichia coli by vesicle fusion. We show the validity of this method for different types of extracts including those from deuterated biomass using a combination of complementary surface sensitive techniques; quartz crystal microbalance, neutron reflection and atomic force microscopy. We find that the head group composition of the deuterated and the hydrogenated lipid extracts is similar (approximately 75% phosphatidylethanolamine, 13% phosphatidylglycerol and 12% cardiolipin) and that both samples can be used to reconstitute high-coverage supported lipid bilayers with a total thickness of 41 ± 3 Å, common for fluid membranes. The formation of supported lipid bilayers composed of natural extracts of Escherichia coli allow for following biomolecular interactions, thus advancing the field towards bacterial-specific membrane biomimics.

On the antimicrobial activity of various peptide-based dendrimers of similar architecture.

Antimicrobial drug resistance is a major human health threat. Among the many attempts to tackle this problem, the synthesis of antimicrobial compounds that mimic natural antimicrobial peptides appears as a promising approach. Peptide-based dendrimers can be designed to have higher potency than natural antimicrobial peptides and at the same time they can evade the bacterial defense system. Novel dendrimers with similar chemical structure but varying potency in terms of minimum inhibitory concentration were designed. The dependency between dendrimer structure and antibacterial activity as well as their capacity to attack model cell membranes was studied. The data suggests that supramolecular structure in terms of charge distribution and amphiphilicity, rather than net charge, is the main driver for disruption of cellular membranes and this correlates well with dendrimer hemolytic activity.

Antimicrobial peptide dendrimer interacts with phosphocholine membranes in a fluidity dependent manner:A neutron reflection study combined with molecular dynamics simulations

The interaction mechanism of a novel amphiphilic antimicrobial peptide dendrimer, BALY, with model lipid bilayers was explored through a combination of neutron reflection and molecular dynamics simulations. 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1,2-dipalmitoyl-sn-glycero-3-phos-phocholine (DPPC) lipid bilayers were examined at room temperature to extract information on the interaction of BALY with fluid and gel phases, respectively. Furthermore, a 1:4 mixture of POPC and DPPC was used as a model of a phase-separated membrane. Upon interaction with fluid membranes, BALY inserted in the distal leaflet and caused thinning and disordering of the headgroups. Membrane thinning and expansion of the lipid cross-sectional area were observed for gel phase membranes, also with limited insertion to the distal leaflet. However, dendrimer insertion through the entire lipid tail region was observed upon crossing the lipid phase transition temperature of DPPC and in phase separated membranes. The results show clear differences in the interaction mechanism of the dendrimer depending on the lipid membrane fluidity, and suggest a role for lipid phase separation in promoting its antimicrobial activity.

Understanding the formation of supported lipid bilayers via vesicle fusion : a case that exemplifies the need for the complementary method approach

In this review, the authors discuss the challenges of studying supported lipid bilayers (SLBs) deposited by vesicle fusion in terms of (1) evaluating SLB formation and quality using quartz crystal microbalance with dissipation and (2) analyzing the composition and asymmetry of SLBs composed by lipid mixtures using complementary surface sensitive techniques. An overview of the literature is presented and the inconsistencies on this topic are discussed with the objective to expand beyond simple lipid compositions and set the basis for forming and analyzing SLBs of complex natural lipid extracts formed via the vesicle fusion method. The authors conclude by providing some guidelines to successfully form SLBs of complex lipid mixtures including natural extracts.

Modeling Small-Angle X-ray Scattering Data for Low-Density Lipoproteins: Insights into the Fatty Core Packing and Phase Transition

Atherosclerosis and its clinical consequences are the leading cause of death in the western hemisphere. While many studies throughout the last decades have aimed at understanding the disease, the clinical markers in use today still fail to accurately predict the risks. The role of the current main clinical indicator, low density lipoprotein (LDL), in depositing fat to the vessel wall is believed to be the onset of the process. However, many subfractions of the LDL, which differ both in structure and composition, are present in the blood and among different individuals. Understanding the relationship between LDL structure and composition is key to unravel the specific role of various LDL components in the development and/or prevention of atherosclerosis. Here, we describe a model for analyzing small-angle X-ray scattering data for rapid and robust structure determination for the LDL. The model not only gives the overall structure but also the particular internal layering of the fats inside the LDL core. Thus, the melting of the LDL can be followed in situ as a function of temperature for samples extracted from healthy human patients and purified using a double protocol based on ultracentrifugation and size-exclusion chromatography. The model provides information on: (i) the particle-specific melting temperature of the core lipids, (ii) the structural organization of the core fats inside the LDL, (iii) the overall shape of the particle, and (iv) the flexibility and overall conformation of the outer protein/hydrophilic layer at a given temperature as governed by the organization of the core. The advantage of this method over other techniques such as cryo-TEM is the possibility of in situ experiments under near-physiological conditions which can be performed relatively fast (minutes at home source, seconds at synchrotron). This approach now allows the monitoring of structural changes in the LDL upon different stresses from the environment, such as changes in temperature, oxidation, or external agents used or currently in development against atherosclerotic plaque build-up and which are targeting the LDL.

Fluorophore labeling of a cell-penetrating peptide significantly alters the mode and degree of biomembrane interaction

The demand for highly efficient macromolecular drugs, used in the treatment of many severe diseases, is continuously increasing. However, the hydrophilic character and large molecular size of these drugs significantly limit their ability to permeate across cellular membranes and thus impede the drugs in reaching their target sites in the body. Cell-penetrating peptides (CPP) have gained attention as promising drug excipients, since they can facilitate drug permeation across cell membranes constituting a major biological barrier. Fluorophores are frequently covalently conjugated to CPPs to improve detection, however, the ensuing change in physico-chemical properties of the CPPs may alter their biological properties. With complementary biophysical techniques, we show that the mode of biomembrane interaction may change considerably upon labeling of the CPP penetratin (PEN) with a fluorophore. Fluorophore-PEN conjugates display altered modes of membrane interaction with increased insertion into the core of model cell membranes thereby exerting membrane-thinning effects. This is in contrast to PEN, which localizes along the head groups of the lipid bilayer, without affecting the thickness of the lipid tails. Particularly high membrane disturbance is observed for the two most hydrophobic PEN conjugates; rhodamine B or 1-pyrene butyric acid, as compared to the four other tested fluorophore-PEN conjugates.