Tanya Shtoyko

Spectroelectrochemical Sensing Based on Attenuated Total Internal Reflectance Stripping Voltammetry. 3. Determination of Cadmium and Copper

The optical and electrochemical properties of metallic films on ITO surfaces resulting from deposition of copper and cadmium were monitored by stripping voltammetry-attenuated internal reflectance spectroscopy. The voltammetric or optical responses of both metals were examined with respect to solution conditions such as pH and presence of dissolved oxygen. The morphologies of these films were also examined using environmental scanning electron microscopy, and the microscopic electrodeposition patterns were found to influence the optical response. The wavelength dependence of the optical response of deposited copper was determined and compared with calculations; optimal performance was at 400 nm for copper. A linear calibration curve was obtained over a range of 1 x 10(-7)-1 x 10(-4) M for copper and compared with that of cadmium. The simultaneous determination of cadmium and copper was demonstrated, and the mechanism of co-deposition is discussed.

Enhanced Fluorescent Immunoassays on Silver Fractal-like Structures

Using the effect of the fluorescence enhancement in close proximity to metal nanostructures, we have been able to demonstrate ultrasensitive immunoassays suitable for the detection of biomarkers. Silver fractal-like structures have been grown by electrochemical reduction of silver on the surface of glass slides. A model immunoassay was performed on the slide surface with rabbit IgG (antigen) noncovalently immobilized on the slide, and rhodamine red-X-labeled antirabbit IgG conjugate was subsequently bound to the immobilized antigen. The fluorescence signal was measured from the glass-fractals surface using a confocal microscope, and the images were compared to the images from the same surface not coated with fractals. Our results showed significant enhancement (more than 100-fold) of the signal detected on fractals compared to bare glass. We thus demonstrate that such fractal-like structures can assist in improving the signals from assays used in medical diagnostics, especially those for analytes with molecular weight under 100 kDa.

Plasmonic platforms of self-assembled silver nanostructures in application to fluorescence.

Fluorescence intensity changes were investigated theoretically and experimentally using self-assembled colloidal structures on silver semitransparent mirrors. Using a simplified quasi-static model and finite element method, we demonstrate that near-field interactions of metallic nanostructures with a continuous metallic surface create conditions that produce enormously enhanced surface plasmon resonances. The results were used to explain the observed enhancements and determine the optimal conditions for the experiment. The theoretical parts of the studies are supported with reports on detailed emission intensity changes which provided multiple fluorescence hot spots with 2-3 orders of enhancements. We study two kinds of the fluorophores: dye molecules and fluorescent nanospheres characterized with similar spectral emission regions. Using a lifetime-resolved fluorescence/reflection confocal microscopy technique, we find that the largest rate for enhancement (~1000-fold) comes from localized areas of silver nanostructures.

Monolayers of Silver Nanoparticles Decrease Photobleaching: Application to Muscle Myofibrils

Studying single molecules in a cell has the essential advantage that kinetic information is not averaged out. However, since fluorescence is faint, such studies require that the sample be illuminated with the intense light beam. This causes photodamage of labeled proteins and rapid photobleaching of the fluorophores. Here, we show that a substantial reduction of these types of photodamage can be achieved by imaging samples on coverslips coated with monolayers of silver nanoparticles. The mechanism responsible for this effect is the interaction of localized surface plasmon polaritons excited in the metallic nanoparticles with the transition dipoles of fluorophores of a sample. This leads to a significant enhancement of fluorescence and a decrease of fluorescence lifetime of a fluorophore. Enhancement of fluorescence leads to the reduction of photodamage, because the sample can be illuminated with a dim light, and decrease of fluorescence lifetime leads to reduction of photobleaching because the fluorophore spends less time in the excited state, where it is susceptible to oxygen attack. Fluorescence enhancement and reduction of photobleaching on rough metallic surfaces are usually accompanied by a loss of optical resolution due to refraction of light by particles. In the case of monolayers of silver nanoparticles, however, the surface is smooth and glossy. The fluorescence enhancement and the reduction of photobleaching are achieved without sacrificing the optical resolution of a microscope. Skeletal muscle myofibrils were used as an example, because they contain submicron structures conveniently used to define optical resolution. Small nanoparticles (diameter approximately 60 nm) did not cause loss of optical resolution, and they enhanced fluorescence approximately 500-fold and caused the appearance of a major picosecond component of lifetime decay. As a result, the sample photobleached approximately 20-fold more slowly than the sample on glass coverslips.

Molecular Fluorescence Enhancement on Fractal-Like Structures

In this report we discuss strong fluorescence enhancements on electrochemically grown silver nanostructures examined through fluorescence lifetime imaging microscopy (FLIM). Silver fractal-like nanostructures were deposited on three different substrates: glass, plastic, and silicon. For all of the surfaces the same dye was tested, DyLight 649, deposited in the form of a model immunoassay through excitation from a 635 nm pulsed solid-state laser. The brightness improvement in hot spots exceeded 300 fold, which is about two times higher than was observed previously on similar surfaces. The strongest enhancements correspond to the shortest lifetimes, indicating a strong interaction between excited molecules and silver nanostructures. Additionally, the photostability of the fluorescence dye was dramatically increased in the presence of electrochemically deposited silver nanostructures. The production of silver fractals is easy, very controllable, and can be applied to any surface. We therefore believe that silver fractal-like nanostructures can be used successfully in ultrasensitive assays and fluorophore trace detection.

Preparation of plasmonic platforms of silver wires on gold mirrors and their application to surface enhanced fluorescence.

In this report we describe a preparation of silver wires (SWs) on gold mirrors and its application to surface enhanced fluorescence (SEF) using a new methodology. Silica protected gold mirrors were drop-coated with a solution of silver triangular nanoprisms. The triangular nanoprisms were slowly air-dried to get silver wires that self-assembled on the gold mirrors. Fluorescence enhancement was studied using methyl azadioxatriangulenium chloride (Me-ADOTA·Cl) dye in PVA spin-coated on a clean glass coverslip. New Plasmonic Platforms (PPs) were assembled by placing a mirror with SWs in contact with a glass coverslip spin-coated with a uniform Me-ADOTA·Cl film. It was shown that surface enhanced fluorescence is a real phenomenon, not just an enhancement of the fluorescence signal due to an accumulation of the fluorophore on rough nanostructure surfaces. The average fluorescence enhancement was found to be about 15-fold. The lifetime of Me-ADOTA·Cl dye was significantly reduced (∼4 times) in the presence of SWs. Moreover, fluorescence enhancement and lifetime did not show any dependence on the excitation light polarization.

Reduction of photobleaching and photodamage in single molecule detection: observing single actin monomer in skeletal myofibrils

Recent advances in detector technology make it possible to achieve single molecule detection (SMD) in a cell. SMD avoids complications associated with averaging signals from large assemblies and with diluting and disorganizing proteins. However, it requires that cells be illuminated with an intense laser beam, which causes photobleaching and cell damage. To reduce these effects, we study cells on coverslips coated with silver nanoparticle monolayers (NML). Muscle is used as an example. Actin is labeled with a low concentration of fluorescent phalloidin to assure that less than a single molecule in a sarcomere is fluorescent. On a glass substrate, the fluorescence of actin decays in a step-wise fashion, establishing a single molecule detection regime. Single molecules of actin in living muscle are visualized for the first time. NML coating decreases the fluorescence lifetime 17 times and enhances intensity ten times. As a result, fluorescence of muscle bleaches four to five times slower than on glass. Monolayers decrease photobleaching because they shorten the fluorescence lifetime, thus decreasing the time that a fluorophore spends in the excited state when it is vulnerable to oxygen attack. They decrease damage to cells because they enhance the electric field near the fluorophore, making it possible to illuminate samples with weaker light.

Sandwich type plasmonic platform for MEF using silver fractals

In this report, we describe a plasmonic platform with silver fractals for metal enhanced fluorescence (MEF) measurements. When a dye containing surface was brought into contact with silver fractals, a significantly enhanced fluorescence signal from the dye was observed. Fluorescence enhancement was studied with the N-methyl-azadioxatriangulenium chloride salt (Me-ADOTA·Cl) in PVA films made from 0.2% PVA (w/v) solution spin-coated on a clean glass coverslip. The Plasmonic Platforms (PP) were assembled by pressing together silver fractals on one glass slide and a separate glass coverslip spin-coated with a uniform Me-ADOTA·Cl in PVA film. In addition, we also tested ADOTA labeled human serum albumin (HSA) deposited on a glass slide for potential PP bioassay applications. Using the new PP, we could achieve more than a 20-fold fluorescence enhancement (bright spots) accompanied by a decrease in the fluorescence lifetime. The experimental results were used to calculate the extinction (excitation) enhancement factor (GA) and fluorescence radiative rate enhancements factor (GF). No change in emission spectrum was observed for a dye with or without contact with fractals. Our studies indicate that this type of PP can be a convenient approach for constructing assays utilizing metal enhanced fluorescence (MEF) without the need for depositing the material directly on metal structures platforms.

Fractal-Like Silver Aggregates Enhance the Brightness and Stability of Single-Molecule Fluorescence

This paper describes a method to significantly enhance single-molecule fluorescence detection in confocal microscopy, demonstrating that fractal-like silver structures significantly improve dye stability and brightness. The experiments compared two immunoassay models based on the deposition of rabbit IgG on silver structures. The experiments were performed with the fluorophore-labeled protein at low picomolar concentrations. Well-separated bright spots were still easily distinguishable. Under standardized conditions we observed increased photostability and brightness enhancement for the dyes that were immobilized on the surface using a primary antibody. In contrast, when the unlabeled primary antibody was immobilized on the surface and the labeled secondary antibody was placed at a larger distance, we observed only a modest enhancement of fluorescence. Furthermore, based on backscattered reflected light images, it was proven that the observed fluorescence enhancements originate from the areas with deposited silver nanostructures. Fractal-like substrates are relatively easy to prepare. We believe that with their superior performance, they should find wide applications in single-molecule studies in which a longer observation time is required.

Metal-enhanced immunoassays.

The surface-confined assay format is one of the most convenient detection formats used in many immunoassays. Fluorescence emission from monolayers of dyes requires a strong excitation and good detection system. Such samples are susceptible to artifacts due to background fluorescence from substrates. We demonstrate that using silver nanostructures deposited on the slide substrate can significantly enhance measured fluorescence, reduce unwanted background and increase photostability of the used probes. Using thin layers of polymer doped with fluorescein, we tested two nanostructures--silver island films (SIFs) deposited on glass slides and self-assembled colloidal structures (SACS) deposited on thin silver film. The SACS surfaces show extraordinary fluorescence enhancements: over 100-folds in hot spots. We applied these surfaces for enhanced Alexa488 model immunoassay.