Tao Tu

High-yield production of a low-temperature-active polygalacturonase for papaya juice clarification

A novel endo-polygalacturonase (endo-PG I) from Achaetomium sp. Xz8 was identified, overexpressed in Pichia pastoris, and characterized in this report. Recombinant endo-PG I is distinguished from other enzyme counterparts by its high activity towards polygalacturonic acid (49,934 U/ml) and high yield in the 15-l fermentor (2.13 g/l). It exhibits optimal activity at 45 °C and remained active over a broad temperature range of 0-80 °C. Distinct from most fungal polygalacturonases that have acidic pH optima, endo-PG I is optimally active at pH 6, similar to the pH of fresh papaya juice (5.7). Endo-PG I alone reduced the viscosity of papaya juice by 17.6%, and increased its transmittance by 59.1%. When combined with a commercial pectin methylesterase, it showed much higher efficiency with a synergy degree of more than 1.25. All these favourable enzymatic properties make endo-PG I attractive for potential applications in the juice industry.

The N-Terminal GH10 Domain of a Multimodular Protein from Caldicellulosiruptor bescii Is a Versatile Xylanase/β-Glucanase That Can Degrade Crystalline Cellulose.

ABSTRACT The genome of the thermophilic bacterium Caldicellulosiruptor bescii encodes three multimodular enzymes with identical C-terminal domain organizations containing two consecutive CBM3b modules and one glycoside hydrolase (GH) family 48 (GH48) catalytic module. However, the three proteins differ much in their N termini. Among these proteins, CelA (or C. bescii Cel9A [CbCel9A]/Cel48A) with a GH9/CBM3c binary partner in the N terminus has been shown to use a novel strategy to degrade crystalline cellulose, which leads to its outstanding cellulose-cleaving activity. Here we show that C. bescii Xyn10C (CbXyn10C), the N-terminal GH10 domain from CbXyn10C/Cel48B, can also degrade crystalline cellulose, in addition to heterogeneous xylans and barley β-glucan. The data from substrate competition assays, mutational studies, molecular modeling, and docking point analyses point to the existence of only one catalytic center in the bifunctional xylanase/β-glucanase. The specific activities of the recombinant CbXyn10C on Avicel and filter paper were comparable to those of GH9/CBM3c of the robust CelA expressed in Escherichia coli. Appending one or two cellulose-binding CBM3bs enhanced the activities of CbXyn10C in degrading crystalline celluloses, which were again comparable to those of the GH9/CBM3c-CBM3b-CBM3b truncation mutant of CelA. Since CbXyn10C/Cel48B and CelA have similar domain organizations and high sequence homology, the endocellulase activity observed in CbXyn10C leads us to speculate that CbXyn10C/Cel48B may use the same strategy that CelA uses to hydrolyze crystalline cellulose, thus helping the excellent crystalline cellulose degrader C. bescii acquire energy from the environment. In addition, we also demonstrate that CbXyn10C may be an interesting candidate enzyme for biotechnology due to its versatility in hydrolyzing multiple substrates with different glycosidic linkages.

New Insights into the Role of T3 Loop in Determining Catalytic Efficiency of GH28 Endo-Polygalacturonases

Intramolecular mobility and conformational changes of flexible loops have important roles in the structural and functional integrity of proteins. The Achaetomium sp. Xz8 endo-polygalacturonase (PG8fn) of glycoside hydrolase (GH) family 28 is distinguished for its high catalytic activity (28,000 U/mg). Structure modeling indicated that PG8fn has a flexible T3 loop that folds partly above the substrate in the active site, and forms a hydrogen bond to the substrate by a highly conserved residue Asn94 in the active site cleft. Our research investigates the catalytic roles of Asn94 in T3 loop which is located above the catalytic residues on one side of the substrate. Molecular dynamics simulation performed on the mutant N94A revealed the loss of the hydrogen bond formed by the hydroxyl group at O34 of pentagalacturonic acid and the crucial ND2 of Asn94 and the consequent detachment and rotation of the substrate away from the active site, and that on N94Q caused the substrate to drift away from its place due to the longer side chain. In line with the simulations, site-directed mutagenesis at this site showed that this position is very sensitive to amino acid substitutions. Except for the altered K m values from 0.32 (wild type PG8fn) to 0.75–4.74 mg/ml, all mutants displayed remarkably lowered k cat (~3–20,000 fold) and k cat/K m (~8–187,500 fold) values and significantly increased △(△G) values (5.92–33.47 kJ/mol). Taken together, Asn94 in the GH28 T3 loop has a critical role in positioning the substrate in a correct way close to the catalytic residues.

Improvement in Thermostability of an Achaetomium sp. Strain Xz8 Endopolygalacturonase via the Optimization of Charge-Charge Interactions

ABSTRACT Improving enzyme thermostability is of importance for widening the spectrum of application of enzymes. In this study, a structure-based rational design approach was used to improve the thermostability of a highly active, wide-pH-range-adaptable, and stable endopolygalacturonase (PG8fn) from Achaetomium sp. strain Xz8 via the optimization of charge-charge interactions. By using the enzyme thermal stability system (ETSS), two residues—D244 and D299—were inferred to be crucial contributors to thermostability. Single (D244A and D299R) and double (D244A/D299R) mutants were then generated and compared with the wild type. All mutants showed improved thermal properties, in the order D244A < D299R < D244A/D299R. In comparison with PG8fn, D244A/D299R showed the most pronounced shifts in temperature of maximum enzymatic activity (T max), temperature at which 50% of the maximal activity of an enzyme is retained (T 50), and melting temperature (Tm ), of about 10, 17, and 10.2°C upward, respectively, with the half-life (t 1/2) extended by 8.4 h at 50°C and 45 min at 55°C. Another distinguishing characteristic of the D244A/D299R mutant was its catalytic activity, which was comparable to that of the wild type (23,000 ± 130 U/mg versus 28,000 ± 293 U/mg); on the other hand, it showed more residual activity (8,400 ± 83 U/mg versus 1,400 ± 57 U/mg) after the feed pelleting process (80°C and 30 min). Molecular dynamics (MD) simulation studies indicated that mutations at sites D244 and D299 lowered the overall root mean square deviation (RMSD) and consequently increased the protein rigidity. This study reveals the importance of charge-charge interactions in protein conformation and provides a viable strategy for enhancing protein stability.

A novel low-temperature-active pectin methylesterase from Penicillium chrysogenum F46 with high efficiency in fruit firming.

A pectin methylesterase gene (pe8F46) was cloned from Penicillium chrysogenum F46 and successfully expressed in Pichia pastoris. The full-length cDNA consists of 969 bp and encodes a 322-residue polypeptide with the calculated molecular weight of 34.1 kDa. Deduced PE8F46 belongs to family 8 of carbohydrate esterases and shares 54% identity with a functionally characterised counterpart from Myceliophthora thermophile. Purified recombinant PE8F46 showed the optimal activity at pH 5.0 and 40°C, and remained 52% maximum activity even at 10°C. An orthogonal experiment was employed to determine the best conditions for firming pineapple dices. After incubation with 0.75% (w/v) PE8F46 and 0.4% calcium lactate (w/v) for 20 min, the firmness of pineapple dices was improved by 47.6%, 13.7% higher than that of a commercial pectinase complex. These results suggest that PE8F46 has application potential in the food industry.

Molecular Characterization of a Thermophilic Endo-polygalacturonase from Thielavia arenaria XZ7 with High Catalytic Efficiency and Application Potential in the Food and Feed Industries

Thermophilic endo-polygalacturonases with high catalytic efficiency are of great interest in the food and feed industries. This study identified an endo-polygalacturonase gene (pg7fn) of glycoside hydrolase family 28 in the thermophilic fungus Thielavia arenaria XZ7. Recombinant PG7fn produced in Pichia pastoris is distinguished from other enzyme counterparts by its high functional temperature (60 °C) and specific activity (34382 ± 351 U/mg toward polygalacturonic acid). The enzyme exhibited good pH stability (pH 3.0-8.0) and resistance to pepsin and trypsin digestion and had a significant effect on disaggregation of soybean meal. Addition of 1 U/g PG7fn increased the pectin bioavailability by 19.33%. The excellent properties described above make PG7fn valuable for applications in the food and feed industries. Furthermore, a comparative study showed that N-glycosylation improved the thermostability and catalytic efficiency of PG7fn.

Insights into the roles of non-catalytic residues in the active site of a GH10 xylanase with activity on cellulose.

Bifunctional glycoside hydrolases have potential for cost-savings in enzymatic decomposition of plant cell wall polysaccharides for biofuels and bio-based chemicals. The N-terminal GH10 domain of a bifunctional multimodular enzyme CbXyn10C/Cel48B from Caldicellulosiruptor bescii is an enzyme able to degrade xylan and cellulose simultaneously. However, the molecular mechanism underlying its substrate promiscuity has not been elucidated. Herein, we discovered that the binding cleft of CbXyn10C would have at least six sugar-binding subsites by using isothermal titration calorimetry analysis of the inactive E140Q/E248Q mutant with xylo- and cello-oligosaccharides. This was confirmed by determining the catalytic efficiency of the wild-type enzyme on these oligosaccharides. The free form and complex structures of CbXyn10C with xylose- or glucose-configured oligosaccharide ligands were further obtained by crystallographic analysis and molecular modeling and docking. CbXyn10C was found to have a typical (β/α)8–TIM barrel fold and “salad-bowl” shape of GH10 enzymes. In complex structures with xylo-oligosaccharides, seven sugar-binding subsites were found, and many residues responsible for substrate interactions were identified. Site-directed mutagenesis indicated that 6 and 10 amino acid residues were key residues for xylan and cellulose hydrolysis, respectively. The most important residues are centered on subsites −2 and −1 near the cleavage site, whereas residues playing moderate roles could be located at more distal regions of the binding cleft. Manipulating the residues interacting with substrates in the distal regions directly or indirectly improved the activity of CbXyn10C on xylan and cellulose. Most of the key residues for cellulase activity are conserved across GH10 xylanases. Revisiting randomly selected GH10 enzymes revealed unreported cellulase activity, indicating that the dual function may be a more common phenomenon than has been expected.

Two acidic, thermophilic GH28 polygalacturonases from Talaromyces leycettanus JCM 12802 with application potentials for grape juice clarification

Efficient hydrolysis of pectic materials to sugars requires the synergistic action of endo- and exo-polygalacturonases. Two novel polygalacturonases (exo-TePG28a and endo-TePG28b) were identified in Talaromyces leycettanus JCM12802, overexpressed in Pichia pastoris, and characterized in this report. The specific activities of TePG28a and TePG28b towards polygalacturonic acid were 280±9 and 25,900±502U/mg, respectively. Both enzymes exhibited optimal activities at pH 3.5 and retained highly stable over a broad pH range of 2.0-7.0. Distinct from most fungal polygalacturonases that have low temperature optima, TePG28a and TePG28b were optimally active at 70°C. When treated the grape juice with the enzyme combination (the unit ratio of TePG28a:TePG28b was 1:4), higher pectin-degrading efficiency (up to 140%) was achieved, and light transmittance was improved from 14% to 82%. These favorable enzymatic properties make TePG28a and TePG28b attractive for the applications in the juice industry.

Probing the role of cation-π interaction in the thermotolerance and catalytic performance of endo-polygalacturonases

Understanding the dynamics of the key pectinase, polygalacturonase, and improving its thermotolerance and catalytic efficiency are of importance for the cost-competitive bioconversion of pectic materials. By combining structure analysis and molecular dynamics (MD) simulations, eight mutagenesis sites having the potential to form cation-π interactions were identified in the widely used fungal endo-polygalacturonase PG63. In comparison to the wild-type, three single mutants H58Y, T71Y and T304Y showed improved thermostability (the apparent Tms increased by 0.6−3.9 °C) and catalytic efficiency (by up to 32-fold). Chromatogram analysis of the hydrolysis products indicated that a larger amount of shorter sugars were released from the polygalacturonic acid by these three mutants than by the wild-type. MD analysis of the enzyme-substrate complexes illustrated that the mutants with introduced cation-π interaction have modified conformations of catalytic crevice, which provide an enviable environment for the catalytic process. Moreover, the lower plasticity of T3 loop 2 at the edge of the subsite tunnel appears to recruit the reducing ends of oligogalacturonide into the active site tunnel and initiates new hydrolysis reactions. This study demonstrates the importance of cation-π interaction in protein conformation and provides a realistic strategy to enhance the thermotolerance and catalytic performance of endo-polygalacturonases.

Insight into the functional roles of Glu175 in the hyperthermostable xylanase XYL10C-ΔN through structural analysis and site-saturation mutagenesis

BackgroundImproving the hydrolytic performance of hemicellulases to degrade lignocellulosic biomass is of considerable importance for second-generation biorefinery. Xylanase, as the crucial hemicellulase, must be thermostable and have high activity for its potential use in the bioethanol industry. To obtain excellent xylanase candidates, it is necessary to understand the structure–function relationships to provide a meaningful reference to improve the enzyme properties. This study aimed to investigate the catalytic mechanism of a highly active hyperthermophilic xylanase variant, XYL10C-ΔN, for hemicellulose degradation.ResultsBy removing the N-terminal 66 amino acids, the variant XYL10C-ΔN showed a 1.8-fold improvement in catalytic efficiency and could hydrolyze corn stover more efficiently in hydrolysis of corn stover; however, it retained similar thermostability to the wild-type XYL10C. Based on the crystal structures of XYL10C-ΔN and its complex with xylobiose, Glu175 located on loop 3 was found to be specific to GH10 xylanases and probably accounts for the excellent enzyme properties by interacting with Lys135 and Met137 on loop 2. Site-saturation mutagenesis confirmed that XYL10C-ΔN with glutamate acid at position 175 had the highest catalytic efficiency, specific activity, and the broadest pH-activity profile. The functional roles of Glu175 were also verified in the mutants of another two GH10 xylanases, XylE and XynE2, which showed increased catalytic efficiencies and wider pH-activity profiles.ConclusionsXYL10C-ΔN, with excellent thermostability, high catalytic efficiency, and great lignocellulose-degrading capability, is a valuable candidate xylanase for the biofuel industry. The mechanism underlying improved activity of XYN10C-ΔN was thus investigated through structural analysis and functional verification, and Glu175 was identified to play the key role in the improved catalytic efficiency. This study revealed the importance of a key residue (Glu175) in XYN10C-ΔN and provides a reference to modify GH10 xylanases for improved catalytic performance.