Tapani A. Pakkanen

Self-Assembly of Supramolecular Luminescent AuI–CuI Complexes: “Wrapping” an Au6Cu6 Cluster in a [Au3(diphosphine)3]3+ “Belt”†

Growing attention to alkynyl complexes of coinage metals, stimulated by their intriguing photophysical properties, has substantially focused on polynuclear homoand heterometallic compounds. The versatile bonding mode of alkynes and metallophilic interactions resulted in the synthesis of numerous cluster complexes which display different structural motifs and emission properties. 9,11] However, in most cases assembly of the complexes occurs in an uncontrolled way 11] and therefore it is a challenge to find a synthetic approach which would allow directed modification of the structural and electronic properties of these compounds. One of the most attractive features of supramolecular construction is the possible tuning of the luminescent behavior through changes in the electron richness of the alkyne ligands by p coordination to different metal ions. This method has been successfully used to synthesize heterometallic complexes by coordination of phosphine–gold(I)– alkyne p-donor metalloligands to d metal centers. These examples of alkynyl p coordination do not lead to ligand rearrangement, and the products formed obey the simple stoichiometry of the reaction. Composition and structure of the metal frameworks of these complexes are mainly determined by the steric properties of the phosphine ligands coordinated to the gold(I) center. This inspired our interest in probing rigid diphosphine ligands for the preparation of Au–alkynyl complexes containing spatially separated Au centers and studying their reactivity towards Cu ions. Herein we report the stepwise synthesis, structural characterization, and luminescence properties of Au–Cu supramolecular complexes self-assembled from simple Au and Cu precursors. Complex [Au2(C CPh)2(m-4,4’-Ph2PC6H4C6H4PPh2)] (1) was obtained by treating polymeric gold phenylacetylide [AuC CPh]n with the diphosphine. X-ray diffraction on 1 revealed a dimeric structure (Figure 1), similar to that found for analogous gold complexes based on the 1,2bis(diphenylphosphanyl)ethane ligand. However, the spectroscopic data (see the Supporting Information) indicate dissociation of the Au Au bonds in solution.

Modulation of metallophilic bonds: solvent-induced isomerization and luminescence vapochromism of a polymorphic Au-Cu cluster.

We report a homoleptic Au-Cu alkynyl cluster that represents an unexplored class of luminescent materials with stimuli-responsive photophysical properties. The bimetallic complex formulated as [Au(2)Cu(2)(C(2)OHC(5)H(8))(4)](n) efficiently self-assembles from Au(SC(4)H(8))Cl, Cu(NCMe)(4)PF(6), and 1-ethynylcyclopentanol in the presence of NEt(3). This compound shows remarkably diverse polymorphism arising from the modulation of metallophilic interactions by organic solvents. Four crystalline forms, obtained from methanol (1a); ethanol, acetone, or choloroform (1b); toluene (1c); and diethyl ether or ethyl acetate (1d), demonstrate different photoluminescent characteristics. The solid-state quantum yields of phosphorescence (Φ) vary from 0.1% (1a) to 25% (1d), depending on the character of intermetallic bonding. The structures of 1b-d were determined by single-crystal X-ray diffraction. The ethanol (1b, Φ = 2%) and toluene (1c, Φ = 10%) solvates of [Au(2)Cu(2)(C(2)OHC(5)H(8))(4)](n) adopt octanuclear isomeric structures (n = 2), while 1d (Φ = 25%) is a solvent-free chain polymer built from two types of Au(4)Cu(4) units. Electronic structure calculations show that the dramatic enhancement of the emission intensity is correlated with the increasing role of metal-metal bonding. The latter makes the emission progressively more metal-centered in the order 1b < 1c < 1d. The metallophilic contacts in 1a-d show high sensitivity to the vapors of certain solvents, which effectively induce unusual solid-state isomerization and switching of the absorption and luminescence properties via non-covalent interactions. The reported polymorphic material is the first example of a gold(I) alkynyl compound demonstrating vapochromic behavior.

Molecular dynamics simulations of water droplets on polymer surfaces

Molecular dynamics simulations were used to study the wetting of polymer surfaces with water. Contact angles of water droplets on crystalline and two amorphous polyethylene (PE) and poly(vinyl chloride) (PVC) surfaces were extracted from atomistic simulations. Crystalline surfaces were produced by duplicating the unit cell of an experimental crystal structure, and amorphous surfaces by pressing the bulk polymer step by step at elevated temperature between two repulsive grid surfaces to a target density. Different-sized water droplets on the crystalline PE surface revealed a slightly positive line tension on the order of 10(-12)-10(-11) N, whereas droplets on crystalline PVC did not yield a definite line tension. Microscopic contact angles produced by the simple point charge (SPC) water model were mostly a few degrees smaller than those produced by the extended SPC model, which, as the model with lowest bulk energy, presents an upper boundary for contact angles. The macroscopic contact angle for the SPC model was 94 degrees on crystalline PVC and 113 degrees on crystalline PE. Amorphicity of the surface increased the water contact angle on PE but decreased it on PVC, for both water models. If the simulated contact angles on crystalline and amorphous surfaces are combined in proportion to the crystallinity of the polymer in question, simulated values in relatively good agreement with measured values are obtained.

Structural Principles of Semiconducting Group 14 Clathrate Frameworks

We have performed a comprehensive theoretical investigation of the structural principles of semiconducting clathrate frameworks composed of the Group 14 elements carbon, silicon, germanium, and tin. We have investigated the basic clathrate frameworks, together with their polytypes, intergrowth clathrate frameworks, and extended frameworks based on larger icosahedral building blocks. Quantum chemical calculations with the PBE0 hybrid density functional method provided a clear overview of the structural trends and electronic properties among the various clathrate frameworks. In agreement with previous experimental and theoretical studies, the clathrate II framework proved to be the energetically most favorable, but novel hexagonal polytypes of clathrate II also proved to be energetically very favorable. In the case of silicon, several of the studied clathrate frameworks possess direct and wide band gaps. The band structure diagrams and simulated powder X-ray patterns of the studied frameworks are provided and systematic preliminary evaluation of guest-occupied frameworks is conducted to shed light on the characteristics of novel, experimentally feasible clathrate compositions.

Micro-micro hierarchy replacing micro-nano hierarchy: a precisely controlled way to produce wear-resistant superhydrophobic polymer surfaces.

Superhydrophobic polymer surfaces are typically fabricated by combining hierarchical micro-nanostructures. The surfaces have a great technological potential because of their special water-repellent and self-cleaning properties. However, the poor mechanical robustness of such surfaces has severely limited their use in practical applications. This study presents a simple and swift mass production method for manufacturing hierarchically structured polymer surfaces at micrometer scale. Polypropylene surface structuring was done using injection molding, where the microstructured molds were made with a microworking robot. The effect of the micro-microstructuring on the polymer surface wettability and mechanical robustness was studied and compared to the corresponding properties of micro-nanostructured surfaces. The static contact angles of the micro-microstructured surfaces were greater than 150° and the contact angle hysteresis was low, showing that the effect of hierarchy on the surface wetting properties works equally well at micrometer scale. Hierarchically micro-microstructured polymer surfaces exhibited the same superhydrophobic wetting properties as did the hierarchically micro-nanostructured surfaces. Micro-microstructures had superior mechanical robustness in wear tests as compared to the micro-nanostructured surfaces. The new microstructuring technique offers a precisely controlled way to produce superhydrophobic wetting properties to injection moldable polymers with sufficiently high intrinsic hydrophobicity.

Octanuclear gold(I) alkynyl-diphosphine clusters showing thermochromic luminescence

The unprecedented, purely gold(I) alkynyl-diphosphine clusters 1-3 demonstrate intense room-temperature phosphorescence with maximum quantum efficiency of 92% in solution (3) and 86% in solid (2) and thermally dependent emission in the crystalline form, attributed to the crystal lattice arrangement.

Determination of a methane intermolecular potential model for use in molecular simulations from ab initio calculations

The possibility of obtaining an accurate site-site potential model suitable for use in molecular dynamics (MD) simulations of methane from ab initio calculations has been explored. Counterpoise-corrected (CPC), supermolecule, ab initio energies at the MP2/6-311+G(2df,2pd) level were computed for eleven relative orientations of two methane molecules as a function of C-C separation distance. C-C, C-H, and H-H interaction parameters in a pairwise-additive, site-site potential model for rigid methane molecules were regressed from the ab initio energies, and the resultant model accurately reproduced the ab initio energies. The model suggests that C-H attractions are dominant in weakly binding the methane dimer. CPC energies for methane trimers, tetramers, and a pentamer were also calculated at the same level. The results indicate that the n-mer energy per pair of interactions monotonically converges with increasing n, but that the assumption of pairwise additivity commonly used in MD simulations is reasonably ...

CO oxidation on PdO surfaces

Density functional calculations were performed in order to investigate CO oxidation on two of the most stable bulk PdO surfaces. The most stable PdO(100) surface, with oxygen excess, is inert against CO adsorption, whereas strong adsorption on the stoichiometric PdO(101) surface leads to favorable oxidation via the Langmuir-Hinshelwood mechanism. The reaction with a surface oxygen atom has an activation energy of 0.66 eV, which is comparable to the lowest activation energies observed on metallic surfaces. However, the reaction rate may be limited by the coverage of molecular oxygen. Actually, the reaction with the site blocking molecular oxygen is slightly more favorable, enabling also possible formation of carbonate surface species at low temperatures. The extreme activity of strongly bonded surface oxygen atoms is more greatly emphasized on the PdO(100)-O surface. The direct reaction without adsorption, following the Eley-Rideal mechanism and taking advantage of the reaction tunnel provided by the adjacent palladium atom, has an activation energy of only 0.24 eV. The reaction mechanism and activation energy for the palladium activated CO oxidation on the most stable PdO(100)-O surface are in good agreement with experimental observations.

Mechanically Robust Superhydrophobic Polymer Surfaces Based on Protective Micropillars

Considerable attention is currently being devoted less to the question of whether it is possible to produce superhydrophobic polymer surfaces than to just how robust they can be made. The present study demonstrates a new route for improving the mechanical durability of water-repellent structured surfaces. The key idea is the protection of fragile fine-scale surface topographies against wear by larger scale sacrificial micropillars. A variety of surface patterns was manufactured on polypropylene using a microstructuring technique and injection molding. The surfaces subjected to mechanical pressure and abrasive wear were characterized by water contact and sliding angle measurements as well as by scanning electron microscopy and roughness analysis based on optical profilometry. The superhydrophobic polypropylene surfaces with protective structures were found to maintain their wetting properties in mechanical compression up to 20 MPa and in abrasive wear tests up to 120 kPa. For durable properties, the optimal surface density of the protective pillars was found to be about 15%. The present approach to the production of water-repellent polymer surfaces provides the advantages of mass production and mechanical robustness with practical applications of structurally functionalized surfaces.

Rational reductive fusion of two heterometallic clusters: formation of a highly stable, intensely phosphorescent Au–Ag aggregate and application in two-photon imaging in human mesenchymal stem cells

An unprecedented Au-Ag alkynyl-diphosphine aggregate, obtained via CO-reduction of a mixture of simple reagents, exhibits intense room-temperature phosphorescence free from O(2) quenching, and serves as an excellent phosphorescence dye suited for both one- and two-photon imaging in human stem cells.