Tarek Rouissi

Adsorption of methylene blue on biochar microparticles derived from different waste materials

Biochar microparticles were prepared from three different types of biochar, derived from waste materials, such as pine wood (BC-PW), pig manure (BC-PM) and cardboard (BC-PD) under various pyrolysis conditions. The microparticles were prepared by dry grinding and sequential sieving through various ASTM sieves. Particle size and specific surface area were analyzed using laser particle size analyzer. The particles were further characterized using scanning electron microscope (SEM). The adsorption capacity of each class of adsorbent was determined by methylene blue adsorption tests in comparison with commercially available activated carbon. Experimental results showed that dye adsorption increased with initial concentration of the adsorbate and biochar dosage. Biochar microparticles prepared from different sources exhibited improvement in adsorption capacity (7.8±0.5 mg g(-1) to 25±1.3 mg g(-1)) in comparison with raw biochar and commercially available activated carbon. The adsorption capacity varied with source material and method of production of biochar. The maximum adsorption capacity was 25 mg g(-1) for BC-PM microparticles at 25°C for an adsorbate concentration of 500 mg L(-1) in comparison with 48.30±3.6 mg g(-1) for activated carbon. The equilibrium adsorption data were best described by Langmuir model for BC-PM and BC-PD and Freundlich model for BC-PW.

Biodegradation of polycyclic aromatic hydrocarbons (PAHs) by fungal enzymes: A review

Polycyclic aromatic hydrocarbons (PAHs) are a large group of chemicals. They represent an important concern due to their widespread distribution in the environment, their resistance to biodegradation, their potential to bioaccumulate and their harmful effects. Several pilot treatments have been implemented to prevent economic consequences and deterioration of soil and water quality. As a promising option, fungal enzymes are regarded as a powerful choice for degradation of PAHs. Phanerochaete chrysosporium, Pleurotus ostreatus and Bjerkandera adusta are most commonly used for the degradation of such compounds due to their production of ligninolytic enzymes such as lignin peroxidase, manganese peroxidase and laccase. The rate of biodegradation depends on many culture conditions, such as temperature, oxygen, accessibility of nutrients and agitated or shallow culture. Moreover, the addition of biosurfactants can strongly modify the enzyme activity. The removal of PAHs is dependent on the ionization potential. The study of the kinetics is not completely comprehended, and it becomes more challenging when fungi are applied for bioremediation. Degradation studies in soil are much more complicated than liquid cultures because of the heterogeneity of soil, thus, many factors should be considered when studying soil bioremediation, such as desorption and bioavailability of PAHs. Different degradation pathways can be suggested. The peroxidases are heme-containing enzymes having common catalytic cycles. One molecule of hydrogen peroxide oxidizes the resting enzyme withdrawing two electrons. Subsequently, the peroxidase is reduced back in two steps of one electron oxidation. Laccases are copper-containing oxidases. They reduce molecular oxygen to water and oxidize phenolic compounds.

Diclofenac in municipal wastewater treatment plant: quantification using laser diode thermal desorption—atmospheric pressure chemical ionization—tandem mass spectrometry approach in comparison with an established liquid chromatography-electrospray ionization–tandem mass spectrometry method

Diclofenac (DCF), a prevalent non-steroidal anti-inflammatory drug (NSAID) is often detected in wastewater and surface water. Analysis of the pharmaceuticals in complex matrices is often laden with challenges. In this study a reliable, rapid and sensitive method based on laser diode thermal desorption/atmospheric pressure chemical ionization (LDTD/APCI) coupled with tandem mass spectrometry (MS/MS) has been developed for the quantification of DCF in wastewater and wastewater sludge. An established conventional LC-ESI-MS/MS (liquid chromatography-electrospray ionization-tandem mass spectrometry) method was compared with LDTD-APCI-MS/MS approach. The newly developed LDTD-APCI-MS/MS method reduced the analysis time to 12s in lieu of 12 min for LC-ESI-MS/MS method. The method detection limits for LDTD-APCI-MS/MS method were found to be 270 ng L(-1) (LOD) and 1000 ng L(-1) (LOQ). Furthermore, two extraction procedures, ultrasonic assisted extraction (USE) and accelerated solvent extraction (ASE) for the extraction of DCF from wastewater sludge were compared and ASE with 95.6 ± 7% recovery was effective over USE with 86 ± 4% recovery. The fate and partitioning of DCF in wastewater (WW) and wastewater sludge (WWS) in wastewater treatment plant was also monitored at various stages of treatment in Quebec Urban community wastewater treatment plant. DCF exhibited affinity towards WW than WWS with a presence about 60% of DCF in WW in contrary with theoretical prediction (LogKow=4.51).

Encapsulation and release studies of strawberry polyphenols in biodegradable chitosan nanoformulation

Polyphenols (negative groups) of strawberry extract interacts with positively protonated amino groups of chitosan which helps in maximum encapsulation. This approach can improve the bioavailability and sustained release of phytochemicals having lower bioavailability. The optimum mass ratio of chitosan-tripolyphosphate and polyphenols (PPs) loading was investigated to be 3:1 and 0.5mg/ml of strawberry extract, respectively. Prepared nanoformulation were characterized by UV-vis spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy. The formed particles size ranged between 300 and 600nm and polydispersity index (PDI) of≈0.5. The optimized formulation showed encapsulation efficiency of 58.09% at 36.47% of polyphenols loading. Initial burst and continuous release of PPs was observed at pH 7.4 of in vitro release studies. PPs release profile at this pH was found to be non-Fickian analomous diffusion and the release was followed first order kinetics. And at pH 1.4, diffusion-controlled Fickian release of PPs was observed.

An insight into the adsorption of diclofenac on different biochars: Mechanisms, surface chemistry, and thermodynamics

Biochars were prepared from feedstocks pinewood and pig manure. Biochar microparticles obtained through grinding were evaluated for the removal of emerging contaminant diclofenac (DCF) and the underlying mechanism were thoroughly studied. Characterization of biochar was carried out using particle size analyzer, SEM, BET, FT-IR, XRD, XPS and zeta potential instrument. Pig manure biochar (BC-PM) exhibited excellent removal efficiency (99.6%) over pine wood biochar (BC-PW) at 500 µg L-1 of DCF (environmentally significant concentration). Intraparticle diffusion was found to be the major process facilitated the adsorption. BC-PW followed pseudo first-order kinetics whereas BC-PM followed pseudo second-order kinetics. Pine wood biochar was largely affected by pH variations whereas for pig manure biochar, pH effects were minimal owing to its surface functional groups and DCF hydrophobicity. Thermodynamics, presence of co-existing ions, initial adsorbate concentration and particles size played substantial role in adsorption. Various isotherms models were also studied and results are presented.

Degradation of chlortetracycline in wastewater sludge by ultrasonication, Fenton oxidation, and ferro-sonication

Residual emerging contaminants in wastewater sludge remain an obstacle for its wide and safe applications such as landfilling and bio-fertilizer. In this study, the feasibility of individual ultrasonication (UlS) and Fenton oxidation (FO) and combined, Ferro-sonication processes (FO) on the degradation of chlortetracycline (CTC) in wastewater sludge was investigated. UlS parameters such as amplitude and sonication time were optimized by response surface methodology (RSM) for further optimization of FS process. Generation of highly reactive hydroxyl radicals in FO and FS processes were compared to evaluate the degradation efficiency of CTC. Increasing in the ratio of hydrogen peroxide and iron concentration showed increased CTC degradation in FO process; whereas in FS, an increase in iron concentration did not show any significant effect (p>0.05) on CTC degradation in sludge. The estimated iron concentration in sludge (115mg/kg) was enough to degrade CTC without the addition of external iron. The only adjustment of sludge pH to 3 was enough to generate in-situ hydroxyl radicals by utilizing iron which is already present in the sludge. This observation was further supported by hydroxyl radical estimation with adjustment of water pH to 3 and with and without the addition of iron. The optimum operating UlS conditions were found to be 60% amplitude for 106min by using RSM. Compared to standalone UlS and FO at 1:1 ratio, FS showed 15% and 8% increased CTC degradation respectively. In addition, UlS of sludge increased estrogenic activity 1.5 times higher compared to FO. FS treated samples did not show any estrogenic activity.

Alternatives to antibiotics in poultry feed: molecular perspectives.

Abstract The discovery of the growth promoting property of antibiotics led to their use as antibiotic feed additives (AFAs) in animal feed at sub-therapeutic doses. Although this has been beneficial for animal health and productivity, it has been, essentially, a double-edged sword. The continued and non-judicious use of AFAs has led to the selection and dissemination of antibiotic-resistant strains of poultry pathogens such as Salmonella, Campylobacter and Escherichia coli. The rapid spread of drug-resistant pathogens as well as emergence of antibiotic-related environmental pollutants is of global concern. Hence, the identification and development of new and effective alternatives to antibiotics that do not hinder productivity is imperative. For this, it is essential to understand not only the molecular basis of development of resistance to AFAs but also the mechanisms of action of AFA alternatives and how they differ from AFAs. This review provides a molecular perspective on the alternatives to antibiotics that have been proposed till date and their current trends, as well as novel approaches such as development of improved delivery systems.

Adsorption of diclofenac onto different biochar microparticles: Dataset – Characterization and dosage of biochar

Due to its wide occurrence in water resources and toxicity, pharmaceuticals and personal care products are becoming an emerging concern throughout the world. Application of residual/waste materials for water remediation can be a good strategy in waste management as well as in waste valorization. Herein, this dataset provides information on biochar application for the removal of emerging contaminant, diclofenac from water matrices. The data presented here is an extension of the research article explaining the mechanisms of adsorption diclofenac on biochars (Lonappan et al., 2017 [1]). This data article provides general information on the surface features of pine wood and pig manure biochar with the help of SEM and FTIR data. This dataset also provides information on XRD profiles of pine wood and pig manure biochars. In addition, different amounts of biochars were used to study the removal of a fixed concentration of diclofenac and the data is provided with this data set.

Efficient and simple method for determination of suspendibility of bio-inoculant suspensions.

This study assessed the utilization of viscosity and zeta potential as a novel method to evaluate suspendibility of formulation of Sinorhizobium meliloti grown in starch industry wastewater for use as bio-inoculants. For this objective, sorbitol was used as a suspending agent at concentrations of 0 to 10% w/v. Model, based on multiple linear regression (with pH as dependant variable, and zeta potential, average particle size and sorbitol concentration as independent variables) demonstrated an important relation which was significant (p<0.001, R2=0.98). Sigmoid regression revealed a significant relation between zeta potential and suspendibility with p value=0.007 and R-squared=0.86, and between viscosity and suspendibility (p value<0.0001 and R squared=0.9823). Thus, these direct correlations established the lowering of measurement time from 12 h to 5 min.

Adsorptive immobilization of agro-industrially produced crude laccase on various micro-biochars and degradation of diclofenac.

Although enzymes are gifted with unique and unprecedented catalytic activity and selectivity over a wide range of pollutants, still their stability related issues often hinder their application in real environmental conditions. In this study, agro-industrially produced crude laccase was concentrated using ultrafiltration. Crude laccase was immobilized on pine wood (BC-PW), pig manure (BC-PM) and almond shell (BC-AS) biochar microparticles. Immobilization of laccase was investigated at various laccase activities on micro-biochars and the release (desorption) of the enzyme has been studied. It was observed that for all the biochars, as the initial concentration of laccase increased in the crude solution, the binding capacity and as result immobilization efficiency also increased. BC-PM was found to be the most effective (31.4 ± 3.1 U g-1) at 10 U mL-1 of enzyme activity followed by BC-AS (24.3 ± 4.8 U g-1) and BC-PW (14.58 ± 3.3 U g-1). In addition, the biochars were functionalized with citric acid for possible surface modifications and the effect of biochars for the adsorption of enzymes has been investigated. Isotherm studies of enzyme loading onto biochar established homogeneous monolayer adsorption as the major mechanism. The desorption of laccase from all biochars followed pseudo-second-order model. Immobilized laccase exhibited superior storage ability and shelf-life which were three times higher than free laccase. Finally, the immobilized laccase was used for the degradation of micropollutant, DCF and near 100% removal was obtained within 5 h at an environmentally relevant concentration (500 μg L-1).