Tekin Şahan

Optimization of removal conditions of copper ions from aqueous solutions by Trametes versicolor

A multi-step response surface methodology was successfully applied to optimize the biosorption conditions for the maximum removal of Cu(II) ions from aqueous solutions using Trametes versicolor fungi as a biosorbent. In the first step, the most effective medium factors, which are pH, temperature and initial Cu(II) concentration, on biosorption of Cu(II), were determined through Plackett-Burman Design. Then steepest accent followed by central composite design steps were utilized to evaluate the optimum biosorption conditions for the maximum Cu(II) ions removal. Based on the statistic analysis; the optimum conditions were obtained 5.51, 20.13 degrees C and 60.98 mg/L as medium pH, medium temperature and initial Cu(II) concentration, respectively. Finally the analysis of variance (ANOVA) of central composite design showed the proposed quadratic model fitted experimental data very well.

Removal of Some Heavy Metal Cations from Aqueous Solution by Adsorption onto Natural Kaolin

The adsorption removal of some heavy metal cations such as Cu(II), Zn(II) and Co(II) from aqueous solution onto kaolin has been studied using the batch method with initial metal ion concentrations within the range 15–70 mg/l. The percentage adsorption and equilibrium concentrations were determined by means of atomic absorption flame photometry as a function of adsorbate concentration, pH and temperature. Ion-exchange studies showed that over the complete concentration range studied the adsorption ratios for metal cations adsorbed onto kaolin correlated with the linear forms of the Langmuir, Freundlich and Dubinin—Kaganer—Radushkevich (DKR) adsorption isotherms. The cationexchange capacity of kaolin towards each metal ion studied was evaluated. It was found that the adsorption phenomena depended on the charge density and diameter of the hydrated ion. The equilibrium studies demonstrated that the selectivity of the ions followed the sequence Zn(II) > Cu(II) > Co(II) at pH 7.0. Calculation of thermodynamic parameters such as the standard enthalpy (ΔH0), Gibbs free energy (ΔG0) and entropy (ΔS0) showed that the adsorption of the heavy metal ions studied onto kaolin was an endothermic process which was favoured at higher temperatures. These results show that natural kaolin has a considerable potential for the removal of heavy metal cationic species from aqueous solution and wastewater.

Response surface approach for optimization of Hg(II) adsorption by 3-mercaptopropyl trimethoxysilane-modified kaolin minerals from aqueous solution

The optimization of Hg(II) adsorption conditions from aqueous solutions with 3-mercaptopropyl trimethoxysilane-modified kaolin (MMK) used as a new adsorbent was analyzed by response surface methodology (RSM) approach. The MMK adsorbent was characterized by means of energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). According to the quadratic model obtained from central composite design (CCD) in RSM, the optimal conditions for adsorption were found to be 30.83 mg/L, 0.1 g, 7.44 and 31.41 °C for Co, adsorbent dosage, initial pH, and T (°C), respectively. With the obtained model, the maximum amount of adsorbed Hg(II) and %Hg(II) removed was calculated to be 30.10 mg/g and 98.01%, respectively. Langmuir and Dubinin-Radushkevich isotherms fitted well the experimental results. Thermodynamic studies revealed that the adsorption was physical, exothermic, spontaneous. The results indicate that MMK a new adsorbent has great potential for the removal of Hg(II) from aqueous media.

Optimization with Response Surface Methodology of biosorption conditions of Hg(II) ions from aqueous media by Polyporus Squamosus fungi as a new biosorbent

Abstract Removal of mercury(II) (Hg(II)) from aqueous media by a new biosorbent was carried out. Natural Polyporus squamosus fungus, which according to the literature has not been used for the purpose of Hg(II) biosorption before, was utilized as a low-cost biosorbent, and the biosorption conditions were analyzed by response surface methodology (RSM). Medium parameters which were expected to affect the biosorption of Hg(II) were determined to be initial pH, initial Hg(II) concentration (Co), temperature (T (°C)), and contact time (min). All experiments were carried out in a batch system using 250 mL fl asks containing 100 mL solution with a magnetic stirrer. The Hg(II) concentrations remaining in fi ltration solutions after biosorption were analyzed using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Based on the RSM results, the optimal conditions were found to be 5.30, 47.39 mg/L, 20°C and 254.9 min for pH, Co, T (°C), and contact time, respectively. Under these optimal conditions, the maximum biosorbed amount and the biosorption yield were calculated to be 3.54 mg/g and 35.37%, respectively. This result was confi rmed by experiments. This result shows that Polyporus squamosus has a specifi c affi nity for Hg ions. Under optimal conditions, by increasing the amount of Polyporus squamosus used, it can be concluded that all Hg ions will be removed

Highly efficient Cd(II) adsorption using mercapto-modified bentonite as a novel adsorbent: An experimental design application based on response surface methodology for optimization

We report the optimization with response surface methodology (RSM) for adsorption conditions required for removal of Cd(II) from an aqueous environment with 3-mercaptopropyl trimethoxysilane-modified bentonite (MMB). Central composite design (CCD) in RSM was used to optimize the most significant adsorption variables of initial pH, temperature (°C), initial Cd(II) concentration (Co, mg L-1) and adsorbent dosage (g). With the quadratic model equation obtained from CCD, the optimum values were determined as initial pH 6.40, temperature 20 °C, Co 49.55 mg L-1 and adsorbent dosage 0.17 g. Under optimum conditions, the optimum adsorption amount of Cd(II) was 27.55 mg Cd(II)/g adsorbent and adsorption yield was 94.52%. The obtained results showed that the Langmuir and Dubinin Radushkevich (D-R) adsorption isotherms were more suitable for adsorption equilibrium data. The kinetic studies indicated that the pseudo-second-order kinetic model was fitted to the adsorption kinetic data. Additionally, thermodynamic studies indicated that the adsorption process was spontaneous and exothermic. As a result, MMB can be chosen as an effective adsorbent for treating heavy metals such as Cd(II) in wastewater and removing them from aqueous solutions. Furthermore, it is thought that it will positively contribute to the literature since the adsorbent-adsorbate combination (MMB-Cd(II)) is used for the first time.