Teodor Veres

Enhanced surface plasmon resonance imaging detection of DNA hybridization on periodic gold nanoposts

We explore periodic gold nanoposts as substrates for the enhanced surface plasmon resonance imaging (SPRi) detection of DNA hybridization. Rigorous coupled-wave analysis was used to model and design the nanopost-based SPRi biosensor. Arrayed gold nanoposts on gold-coated glass substrate, with various widths and periodicity, were fabricated using electron-beam lithography and characterized with scanning electron and atomic force microscopy. A scanning-angle SPRi apparatus was used to conduct the kinetic analysis of DNA hybridization on nanopost-based sensor surface and assess the corresponding SPR signal amplification. Experimental results showed that both the nanostructure size and period influenced the SPR signal enhancement; the optimized 30 nm height, 50 nm size, and 110 nm period nanoposts provided a fivefold SPR signal amplification compared with the plain 50 nm thick gold film used as control.

Sub-femtomole detection of 16s rRNA from Legionella pneumophila using surface plasmon resonance imaging.

Legionellosis has been and continues to be a life-threatening disease worldwide, even in developed countries. Given the severity and unpredictability of Legionellosis outbreaks, developing a rapid, highly specific, and sensitive detection method is thus of great pertinence. In this paper, we demonstrate that sub-femtomole levels of 16s rRNA from pathogenic Legionella pneumophila can be timely and effectively detected using an appropriate designed capture, detector probes, and a QD SPRi signal amplification strategy. To achieve specific and sensitive detection, optimal hybridization conditions and parameters were implemented. Among these parameters, fragmentation of the 16s rRNA and further signal amplification by QDs were found to be the main parameters contributing to signal enhancement. The appropriate design of the detector probes also increased the sensitivity of the detection system, mainly due to secondary structure of 16s rRNA. The use of 16s rRNA from L. pneumophila allowed for the detection of metabolically active pathogens with high sensitivity. Detection of 16s rRNA in solutions as diluted as 1 pM at 450 μL (0.45 femtomole) was achieved in less than 3h, making our approach suitable for the direct, timely, and effective detection of L. pneumophila within man-made water systems.

All-thermoplastic nanoplasmonic microfluidic device for transmission SPR biosensing

Early and accurate disease diagnosis still remains a major challenge in clinical settings. Biomarkers could potentially provide useful tools for the detection and monitoring of disease progression, treatment safety and efficacy. Recent years have witnessed prodigious advancement in biosensor development with research directed towards rapid, real-time, label-free and sensitive biomarker detection. Among emerging techniques, nanoplasmonic biosensors pose tremendous potential to accelerate clinical diagnosis with real-time multiplexed analysis, rapid and miniaturized assays, low sample consumption and high sensitivity. In order to translate these technologies from the proof-of-principle concept level to point of care clinical diagnosis, integrated, portable devices having small footprint cartridges that house low-cost disposable consumables are sought. Towards this goal, we developed an all-polymeric nanoplasmonic microfluidic (NMF) transmission surface plasmon resonance (SPR) biosensor. The device was fabricated in thermoplastics using a simple, single step and cost-effective hot embossing technique amenable to mass production. The novel 3D hierarchical mold fabrication process enabled monolithic integration of blazed nanogratings within the detection chambers of a multichannel microfluidic system. Consequently, a single hard thermoplastic bottom substrate comprising plasmonic and fluidic features allowed integration of active fluidic elements, such as pneumatic valves, in the top soft thermoplastic cover, increasing device functionality. A simple and compact transmission-based optical setup was employed with multiplexed end-point or dual-channel kinetic detection capability which did not require stringent angular accuracy. The sensitivity, specificity and reproducibility of the transmission SPR biosensor was demonstrated through label-free immunodetection of soluble cell-surface glycoprotein sCD44 at clinically relevant picomolar to nanomolar concentrations.

Separation of rare oligodendrocyte progenitor cells from brain using a high-throughput multilayer thermoplastic-based microfluidic device

Despite the advances made in the field of regenerative medicine, the progress in cutting-edge technologies for separating target therapeutic cells are still at early stage of development. These cells are often rare, such as stem cells or progenitor cells that their overall properties should be maintained during the separation process for their subsequent application in regenerative medicine. This work, presents separation of oligodendrocyte progenitor cells (OPCs) from rat brain primary cultures using an integrated thermoplastic elastomeric (TPE)- based multilayer microfluidic device fabricated using hot-embossing technology. OPCs are frequently used in recovery, repair and regeneration of central nervous system after injuries. Indeed, their ability to differentiate in vitro into myelinating oligodendrocytes, are extremely important for myelin repair. OPCs form 5-10% of the glial cells population. The traditional macroscale techniques for OPCs separation require pre-processing of cells and/or multiple time consuming steps with low efficiency leading very often to alteration of their properties. The proposed methodology implies to separate OPCs based on their smaller size compared to other cells from the brain tissue mixture. Using aforementioned microfluidic chip embedded with a 5 μm membrane pore size and micropumping system, a separation efficiency more than 99% was achieved. This microchip was able to operate at flow rates up to 100 μl/min, capable of separating OPCs from a confluent 75 cm(2) cell culture flask in less than 10 min, which provides us with a high-throughput and highly efficient separation expected from any cell sorting techniques.

Rapid and specific SPRi detection of L. pneumophila in complex environmental water samples

Legionellosis is a very devastating disease worldwide mainly due to unpredictable outbreaks in man-made water systems. Developing a highly specific and sensitive rapid detection system that detects only metabolically active bacteria is a main priority for water quality assessment. We previously developed a versatile technique for sensitive and specific detection of synthetic RNA. In the present work, we further investigated the performance of the developed biosensor for detection of Legionella pneumophila in complex environmental samples, particularly those containing protozoa. The specificity and sensitivity of the detection system were verified using total RNA extracted from L. pneumophila in spiked water co-cultured with amoebae. We demonstrated that the expression level of ribosomal RNA (rRNA) is extremely dependent on the environmental conditions. The presence of amoebae with L. pneumophila, especially in nutrition-deprived samples, increased the amount of L. pneumophila 15-fold after 1xa0week as measured through the expression of 16s rRNA. Using the developed surface plasmon resonance imaging (SPRi) detection method, we were also able to successfully detect L. pneumophila within 3xa0h, both in the presence and absence of amoebae in the complex environmental samples obtained from a cooling water tower. These findings suggest that the developed biosensing system is a viable method for rapid, real-time and effective detection not only for L. pneumophila in environmental samples but also to assess the risk associated with the use of water contaminated with other pathogens.