Teruo Okano

Decrease in culture temperature releases monolayer endothelial cell sheets together with deposited fibronectin matrix from temperature-responsive culture surfaces

Bovine aortic endothelial cells were cultured on surfaces grafted with a temperature-responsive polymer, poly(N-isopropylacrylamide) (PIPAAm), in the presence of serum. Cells adhered, spread, proliferated, and reached confluency as observed on ungrafted tissue culture polystyrene dishes. A decrease in culture temperature released cells only from the grafted surfaces without enzymatic or ethylenediaminetetraacetic acid treatment. Upon lowering temperature, the culture surfaces changed from hydrophobic to hydrophilic owing to the hydration of grafted PIPAAm and thus weakened the cell attachment to the dishes. Released cells maintained cell-cell junctions composing monolayer cell sheets. Immunoblotting and immunofluorescence microscopy revealed that fibronectin (FN) was deposited and accumulated on the grafted surfaces during the culture. Furthermore, the deposited FN matrix adhering to cell sheets was also recovered from temperature-responsive surfaces by low-temperature treatment, while trypsin treatment destroyed the matrix. The recovery of FN by low-temperature treatment was as high as by physical scraping with a rubber blade. Temperature-responsive surfaces can provide a novel method to use cultured confluent cell sheets for tissue engineering, and also to elucidate structure and function of deposited extracellular matrix during cell culture.

Physical Entrapment of Adriamycin in AB Block Copolymer Micelles

The entrapment of Adriamycin (ADR) in micelles composed of AB block copolymers (poly(ethylene oxide-co-β-benzyl L-aspartate) (PEO-PBLA)) was investigated. The loading process involved transfer of ADR and PEO-PBLA into an aqueous milieu from dimethyl-formamide (DMF) through a dialysis procedure. Evidence for the physical entrapment of ADR in the polymeric micelles was derived from fluorescence spectroscopy and gel permeation chromatography (GPC). The total fluorescence intensity of ADR was low, suggesting that the drug was self-associated in the micelles. In addition, quenching experiments, using a water-soluble quencher (iodide (I–)), showed that the fluorescence of ADR present in micellar solutions was largely unaffected by I–, whereas the fluorescence of free ADR was readily quenched. From Stern-Volmer plots, quenching constants (KSV) of 2.2 and 17 M−l were determined for ADR in micellar solutions and free ADR, respectively. As a result of the entrapment of ADR in the micelles, ADR binds only slightly serum albumin as evidenced by GPC. In contrast, ADR readily binds serum albumin in aqueous solutions. The findings suggest that ADR is stably entrapped in PEO-PBLA micelles. ADR entrapment in polymeric micelles is expected to affect markedly the pharmacokinetics of ADR.

Rapid cell sheet detachment from Poly(N-isopropylacrylamide)-grafted porous cell culture membranes

Fabrication of functional tissue constructs using sandwiched layers of cultured cells could prove to be an attractive approach to tissue engineering. Rapid detachment of cultured cell sheets is a very important recovery method that permits facile manipulation of the sheet and prevents functional damage. To accelerate the required culture substrate hydrophilic and hydrophobic structural changes in response to culture temperature alteration, poly(N-isopropylacrylamide) (PIPAAm) was grafted onto porous culture membranes by electron beam irradiation. Analyses by attenuated total reflection-Fourier transform IR and electron spectroscopy for chemical analysis revealed that PIPAAm was successfully grafted to surfaces of porous membranes. Atomic force microscopy (AFM) results showed that PIPAAm-grafted membranes had smoother surfaces than ungrafted controls while retaining their porous structure. The mean roughness of PIPAAm-grafted and -ungrafted porous membrane surfaces determined by digital AFM autocalculation was 4.40 +/- 0.4 and 5.9 +/- 0.4 nm, respectively. Tissue culture polystyrene (TCPS) dishes grafted with PIPAAm were compared with PIPAAm-grafted porous membranes in cell sheet detachment experiments. Approximately 75 min was required to completely detach cell sheets from PIPAAm-grafted TCPS surfaces compared to only 30 min to detach cell sheets from PIPAAm-grafted porous membranes. With porous membranes, the water accesses the PIPAAm-grafted surface from underneath and peripheral to the attached cell sheet, resulting in rapid hydration of grafted PIPAAm molecules and detachment of the cell sheet. With TCPS PIPAAm-grafted surfaces the water is supplied from only the periphery of a cell sheet, slowing detachment.

Biodistribution of Micelle-Forming Polymer–Drug Conjugates

Polymeric micelles have potential utility as drug carriers. To this end, polymeric micelles based on AB block copolymers of polyethylene oxide (PEG) and poly(aspartic acid) [p(Asp)] with covalently bound Adriamycin (ADR) were prepared. The micelle forming polymer–drug conjugates [PEO-p(Asp(ADR)] were radiolabeled and their biodistribution was investigated after intravenous injection in mice. Long circulation times in blood for some compositions of PEO-p[Asp(ADR)] conjugates were evident, which are usually atypical of colloidal drug carriers. This was attributed to the low interaction of the PEO corona region of the micelles with biocomponents (e.g., proteins, cells). Low uptake of the PEO-p(Asp(ADR)] conjugates in the liver and spleen was determined. The biodistribution of the PEO-p[Asp(ADR)] conjugates was apparently dependent on micelle stability; stable micelles could maintain circulation in blood, while unstable micelles readily formed free polymer chains which rapidly underwent renal excretion. Long circulation times in blood of PEO-p(Asp(ADR)] conjugates are thought to be prerequisite for enhanced uptake at target sites (e.g., tumors).

Temperature-responsive culture dishes allow nonenzymatic harvest of differentiated Madin-Darby canine kidney (MDCK) cell sheets

We have developed a temperature-responsive culture dish grafted with a poly(N-isopropylacrylamide) (PIPAAm). Various types of cells adhere, spread, and proliferate on the grafted dishes in the presence of serum at 37 degrees C. By reducing only temperature, these cells can be harvested noninvasively from the dishes according to rapid hydration of the grafted polymer. Because the harvest does not need enzymatic digestion, differentiated cell phenotypes are retained. In the present study, a renal epithelial cell line, Madin-Darby canine kidney (MDCK) cell, was cultured on the dishes, and cell behavior was examined. MDCK cells showed differentiated phenotypes such as dome formation during long-term culture, similar to on ungrafted dishes. After 1-week culture at 37 degrees C, trypsin digestion disrupted cell-cell junctions but failed to liberate cells from both ungrafted and grafted dishes. However, short-term incubation at 20 degrees C released confluent MDCK cells as a single contiguous cell sheet only from the polymer-grafted dishes because of selective disruption of the cell-surface binding. Immunocytochemistry with anti-beta-catenin antibody revealed that functional cell-cell junctions were organized even in the recovered cell sheets. Intriguingly, incubation time at 20 degrees C required for cell sheet detachment gradually shortened during long-term culture before reducing temperature. The acceleration of cell detachment was correlated to the decrease of a single cell area by means of cell contractile force. These findings suggest that cell sheet detachment from PIPAAm-grafted dishes should be accomplished by both PIPAAm hydration and cellular metabolic activity such as cell contraction.

Release of adsorbed fibronectin from temperature-responsive culture surfaces requires cellular activity

We have previously developed a temperature-responsive cell culture surface by grafting poly(N-isopropylacrylamide) that changes its surface hydrophobicity in response to temperature. While this surface shows similar hydrophobicity to that of commercial polystyrene cell culture surfaces and facilitates cell adhesion and proliferation at 37 degrees C, grafted polymer becomes hydrophilic below 32 degrees C and releases spread cultured cells without trypsin. Temperature-regulated cell detachment requires cell metabolic activity requiring ATP consumption, signal transduction, and cytoskeleton reorganziation. Precoating these surfaces with fibronectin (FN) improves spreading of less adhesive cultured hepatocytes and reducing culture temperature releases cultured cells from FN-adsorbed grafted surfaces. Immunostaining with anti-FN antibody revealed that only FN located beneath cultured cells is removed from culture surfaces after reducing temperature. FN adsorbed to surface areas lacking direct cell attachment remained surface-bound after reducing temperature. A novel concept of active cell detachment is also discussed.

Temperature-dependent modulation of blood platelet movement and morphology on poly(N-isopropylacrylamide)-grafted surfaces.

Poly(N-isopropylacrylamide) (PIPAAm) exhibits a reversible, temperature-dependent soluble/insoluble transition at its lower critical solution temperature (LCST) of 32 degrees C in aqueous media. The temperature-responsive PIPAAm was grafted onto tissue culture polystyrene (TCPS) dish surfaces by electron beam irradiation. Blood platelet behaviors on PIPAAm-grafted surface were examined by computerized image analysis and scanning electron microscopy. Platelet behaviors on this surface were dramatically dependent upon temperature, but those on poly(ethylene glycol)(PEG)-grafted or polystyrene remained unchanged. Below the 32 degrees C (LCST), platelets on PIPAAm-grafted surfaces retained a rounded shape and an oscillating vibratory microbrownian motion for extended times, similarly to those on PEG-grafted surfaces. Above the LCST, platelets readily adhered, spread and developed characteristic pseudopodia on PIPAAm-grafted surface similarly to those on TCPS. An ATP synthesis inhibitor failed to hinder prevention of platelet adhesion onto PIPAAm-grafted surface (below the LCST) suggesting that the preventive mechanism is ATP-independent similarly to that of PEG-grafted surfaces. These results correlate platelet surface activation state with the hydration and structure of polymer surfaces, and demonstrate the ability to modulate such reactions by a small temperature change in situ.

Design of functional polymeric micelles as site-specific drug vehicles based on poly(α-hydroxy ethylene oxide-co-β-benzyl L-aspartate) block copolymers

Abstract Poly ( α -hydroxy ethylene oxide-co- β -benzyl l -aspartate), α -hydroxy PEO/PBLA, block copolymers were used for the formulation of new functional polymeric micelles. They have a small diameter (about 30 nm) and a very low critical micellar concentration (cmc) in water, ca. 4 mg l −1 . Doxorubicin (DOX) was physically entrapped into the hydrophobic inner core of these functional micelles. The diameter of DOX-loaded α -hydroxy PEO/PBLA micelles was determined to be approximatively the same as the diameter of the corresponding empty micelles, ca. 25 nm. Moreover, the DOX-loaded functional micelles, as the corresponding empty micelles, were shown to be stable in 0.1 M phosphate buffered solution (PBS) pH 7.4 even in presence of proteins. The cytotoxicity of DOX-loaded functional micelles against P388D1 leukemia cells was studied and compared to the one of DOX-loaded α -methoxy PEO/PBLA micelles and to the cytotoxicity of both α -hydroxy and α -methoxy PEO/PBLA micelles. From this study it was concluded that the DOX-loaded functional micelles seem to have a slightly higher cytotoxicity than the DOX-loaded α -methoxy PEO/PBLA micelles, while both empty micelles were shown to be non-cytotoxic against P388D1 leukemia cells.

Development of Polymeric Micelles for Drug Delivery of Indomethacin

To estimate a feasibility of novel containers for drugs, poly(ethylene oxide)-poly(s-benzyl L-aspartate) (PEO-PBLA) micelles were prepared by dialysis into water from different solvents (e.g., DMF, acetonitrile, THF, DMSO, DMAc, and ethyl alcohol), determining the critical micelle concentration (cmc) of the prepared micelles in distilled water by a fluorescence probe technique using pyrene. Then, indomethacin (IMC) as a model drug was incorporated into the micelles by dialysis and O/W emulsion method. Characteristics of PEO-PBLA micelle without and with the physically trapped IMC in the inner core of the micelles (IMC/PEO-PBLA) were studied by dynamic light scattering and GPC/HPLC as well as in vitro release test of IMC from the micelle was conducted.

Functional Polymeric Micelles: Synthesis and Characterization

Heterobifunctional poly(ethylene oxide-co-s-benzyl-L-aspartate) -PEO/PBLA- block copolymers having methoxy groups or hydroxy functions at the free end of the PEO chains were synthesized and characterized. They show a stable left-handed α-helix conformation in chloroform, whereas in dimethylsulfoxide (DMSO) and in dimethylacetamide (DMAc), their conformation is random-coil. a-hydroxy and a-methoxy PEO/PBLA polymeric micelles were obtained by dialysis against water of the corresponding block copolymers solution in DMAc. Both polymeric micelles have a similar diameter (≤ 50nm), a very low critical micellar concentration (cmc ≤ 10 mg/L in water) and a good stability in PBS and in PBS/Serum. About 18% of Adriamycin (ADR) was loaded in the inner-core of both polymeric micelles. The diameter of the ADR-loaded micelles was similar to the diameter of the corresponding empty micelles, and they were found to be stable in PBS and in PBS/Serum. The first results on the cytotoxicity of entraped ADR against P388D1 leukemia cells show quite high cytotoxicity level for both carriers.