Teruyuki Kozuka

The range of ambient radius for an active bubble in sonoluminescence and sonochemical reactions.

Numerical simulations of nonequilibrium chemical reactions inside an air bubble in liquid water irradiated by ultrasound have been performed for various ambient bubble radii. The intensity of sonoluminescence (SL) has also been calculated taking into account electron-atom bremsstrahlung, radiative attachment of electrons to neutral molecules, radiative recombination of electrons and ions, chemiluminescence of OH, molecular emission from nitrogen, etc. The lower bound of ambient radius for an active bubble in SL and sonochemical reactions nearly coincides with the Blake threshold for transient cavitation. The upper bound is in the same order of magnitude as that of the linear resonance radius. In actual experiments, however, the distribution of ambient radius for active bubbles may be narrow at around the threshold ambient radius for the shape instability. The threshold peak temperature inside an air bubble for nitrogen burning is higher than that for oxidant formation. The threshold peak temperatures depend on ultrasonic frequency and acoustic amplitude because chemical reactions inside a bubble are in nonequilibrium. The dominant emission mechanism in SL is electron-atom bremsstrahlung except at a lower bubble temperature than 2000 K, for which molecular emissions may be dominant.

Noncontact Acoustic Manipulation in Air

A noncontact manipulation technique is useful for micromachine technology, biotechnology, and new materials processing. In this paper, we describe an advanced manipulation technique for transporting small objects in air. A standing wave field was generated by two sound beams crossing each other generated by bolted Langevin transducers. Expanded polystyrene particles were trapped at the nodes of the sound pressure in the standing wave field. The position of a trapped particle was shifted by changing the phase difference between the two sound beams. When the trapped particle is transported, it spatially oscillate periodically in a direction perpendicular to that of particle transportation. The numerical calculation of an acoustic field revealed that it is caused by the reflection of an ultrasonic wave at each transducer surface.

Influence of bubble clustering on multibubble sonoluminescence

Influence of clustering of cavitation bubbles on multibubble sonoluminescence (MBSL) in standing wave fields is studied through measurement of MBSL intensity with a photomultiplier tube and observation of corresponding bubble behavior with a high-speed video camera and an intensified charge-coupled device one. It is clarified that, when the SL is quenched suddenly at excessive ultrasonic power, the behavior of bubbles clearly changes; the bubbles which form dendritic branches of filaments change into clusters due to the secondary Bjerknes force. The cluster is composed of several bubbles surrounded by many tiny bubbles, in which bubbles repeatedly coalesce and fragment, and run away from pressure antinodes. When the clusters are broken up by forced fluid motion, the quenching of MBSL is suppressed.

Control of a Standing Wave Field Using a Line-Focused Transducer for Two-Dimensional Manipulation of Particles

Control of the positions of particles using acoustic radiation pressure in water was studied to develop a noncontact micromanipulation technique. In this paper a method to transport the particles two-dimensionally using an ultrasonic standing wave field between a line-focused transducer with multiple electrodes and a reflector placed at the focal line is described. When alumina suspension of mean diameter 16 µm was poured into the standing wave field of 2.1 MHz, the particles were trapped and agglomerated at sound pressure nodes existing at half wavelength on the sound beam axis near the reflector. Changing the frequency alters the wave-length and hence the interval of agglomeration. Therefore the trapped particles were transported along the sound beam axis. When the next electrodes were driven, the standing wave field shifted laterally and the trapped particles moved to the corresponding nodal points. Thus two-dimensional transportation was realized using the line-focused transducer. A sound field generated by the line-focused transducer was discussed based on numerical calculations to design an optimum shape of a transducer for manipulation.

Acoustic Standing-Wave Field for Manipulation in Air

A noncontact manipulation technique is necessary in micromachine technology. Using a standing-wave field generated between a transducer and a reflector, it is possible to trap particles at nodes of a sound pressure field. In the present paper, a sound field has been studied by both experimental measurement and numerical calculation. The sound pressure distribution of a standing-wave field was measured using a small microphone and calculated numerically using Rayleighs formula. Although Rayleighs formula is usually used to calculate direct sound pressure from a sound source, it has been shown that the sound pressure of the standing-wave field can be calculated by Rayleighs formula by adding multiply reflected waves.

Influence of the bubble-bubble interaction on destruction of encapsulated microbubbles under ultrasound

Influence of the bubble-bubble interaction on the pulsation of encapsulated microbubbles has been studied by numerical simulations under the condition of the experiment reported by Chang et al. [IEEE Trans. Ultrason Ferroelectr. Freq. Control 48, 161 (2001)]. It has been shown that the natural (resonance) frequency of a microbubble decreases considerably as the microbubble concentration increases to relatively high concentrations. At some concentration, the natural frequency may coincide with the driving frequency. Microbubble pulsation becomes milder as the microbubble concentration increases except at around the resonance condition due to the stronger bubble-bubble interaction. This may be one of the reasons why the threshold of acoustic pressure for destruction of an encapsulated microbubble increases as the microbubble concentration increases. A theoretical model for destruction has been proposed.

Relationship between the bubble temperature and main oxidant created inside an air bubble under ultrasound

Numerical simulations of nonequilibrium chemical reactions in a pulsating air bubble have been performed for various ultrasonic frequencies (20 kHz, 100 kHz, 300 kHz, and 1 MHz) and pressure amplitudes (up to 10 bars). The results of the numerical simulations have indicated that the main oxidant is OH radical inside a nearly vaporous or vaporous bubble which is defined as a bubble with higher molar fraction of water vapor than 0.5 at the end of the bubble collapse. Inside a gaseous bubble which is defined as a bubble with much lower vapor fraction than 0.5, the main oxidant is H2O2 when the bubble temperature at the end of the bubble collapse is in the range of 4000-6500 K and O atom when it is above 6500 K. From the interior of a gaseous bubble, an appreciable amount of OH radical also dissolves into the liquid. When the bubble temperature at the end of the bubble collapse is higher than 7000 K, oxidants are strongly consumed inside a bubble by oxidizing nitrogen and the main chemical products inside a bubble are HNO2, NO, and HNO3.

Spatial distribution enhancement of sonoluminescence activity by altering sonication and solution conditions.

An intensified charge-couped device (CCD) camera was used to capture raw images of multibubble sonoluminescence, generated by 168 and 448 kHz ultrasound. The effect of various air and surfactant concentrations, and pulse conditions on the acoustic pressure distribution, percentage of standing wave component, the structure of the sonoluminescence activity, and speed of streaming was investigated. It was observed that the enhancement in the sonoluminescence intensity by appropriate degassing, pulsing, and addition of sodium dodecylsulfate were closely related to an expansion in the spatial distribution of sonoluminescence activity. This broadening in the spatial distribution is correlated with a high percentage of standing wave component. This effect stems from the reduction in the attenuation of the acoustic field by inhibiting the formation of large coalesced bubbles.

Protein release from yeast cells as an evaluation method of physical effects in ultrasonic field

The release rate of intercellular protein from yeast cells by the ultrasonic action is proposed as a method for evaluating the physical (mechanical) effects of the ultrasonic field. The protein concentration was quantitatively determined using UV absorbance of proteins by spectrophotometry. The detail of the procedures, such as the effects of the origin of yeast cells, pretreatment of the cells, and the wavelengths for spectrophotometric determination of protein content, are examined. The effectiveness of the proposed evaluation method was experimentally demonstrated by changing the irradiation conditions of ultrasound, such as the concentration of yeast cells, temperature, ultrasound power, types of sonicator, and the superposition with the mechanical mixing. The results validate the usefulness of the proposed evaluation method for the quantification of the physical effects of ultrasound fields. Also, the range of cavitational effects of ultrasound sensed by the evaluation procedures were discussed.

Spatial Distribution of Acoustic Cavitation Bubbles at Different Ultrasound Frequencies

Images of sonoluminescence, sonophotoluminescence and sonochemiluminescence are recorded in order to semi-quantitatively compare the spatial distribution of the cavitation activity at three different ultrasound frequencies (170 kHz, 440 kHz and 700 kHz) and at various acoustic amplitudes. At all ultrasound frequencies investigated, the sonochemically active cavitation zones are much larger than the cavitation zones where sonoluminescence is observed. Also, the sonochemically active bubbles are observed at relatively lower acoustic amplitudes than that required for sonoluminescence bubbles to appear. The acoustic power required for the observation of the initial cavitation bubbles increases with an increase in the ultrasound frequency. The cavitation bubbles are observed relatively uniformly throughout the reactor at 170 kHz whereas they are located away from the transducer at the higher frequencies used in this study. While these observations highlight the complexities involved in acoustic cavitation, possible reasons for the observed results are discussed.