Theo G. M. van de Ven

Kinetic aspects of polymer and polyelectrolyte adsorption on surfaces

Abstract The behavior of polymers adsorbed on a single surface or bridging two surfaces is fairly well understood when thermodynamic equilibrium conditions prevail. The work of Nobel prize winner, P.G. de Gennes, to whom the papers in this issue of Advances in Colloid and Interface Science are dedicated, has greatly contributed to this field. Useful as this knowledge is, in practise many situations are encountered in which polymer adsorption is not thermodynamically but kinetically controlled. In this paper we discuss various aspects of non-equilibrium polymer and polyelectrolyte adsorption, based on recent experimental findings. The discussion of these aspects is mainly qualitative, since we are still far from a detailed quantitative theory of the kinetics of polymer adsorption. Many of the examples are relevant to the chemistry of papermaking.

Films Prepared from Electrosterically Stabilized Nanocrystalline Cellulose

Electrosterically stabilized nanocrystalline cellulose (ENCC) was modified in three ways: (1) the hydroxyl groups on C2 and C3 of glucose repeat units of ENCC were converted to aldehyde groups by periodate oxidation to various extents; (2) the carboxyl groups in the sodium form on ENCC were converted to the acid form by treating them with an acid-type ion-exchange resin; and (3) ENCC was cross-linked in two different ways by employing adipic dihydrazide as a cross-linker and water-soluble 1-ethyl-3-[3-(dimethylaminopropyl)] carbodiimide as a carboxyl-activating agent. Films were prepared from these modified ENCC suspensions by vacuum filtration. The effects of these three modifications on the properties of films were investigated by a variety of techniques, including UV-visible spectroscopy, a tensile test, thermogravimetric analysis (TGA), the water vapor transmission rate (WVTR), and contact angle (CA) studies. On the basis of the results from UV spectra, the transmittance of these films was as high as 87%, which shows them to be highly transparent. The tensile strength of these films was increased with increasing aldehyde content. From TGA and WVTR experiments, cross-linked films showed much higher thermal stability and lower water permeability. Furthermore, although the original cellulose is hydrophilic, these films also exhibited a certain hydrophobic behavior. Films treated by trichloromethylsilane become superhydrophobic. The unique characteristics of these transparent films are very promising for potential applications in flexible packaging and other high-technology products.

Energy requirements for the disintegration of cellulose fibers into cellulose nanofibers

Cellulose nanofibers have a bright future ahead as components of nano-engineered materials, as they are an abundant, renewable and sustainable resource with outstanding mechanical properties. However, before considering real-world applications, an efficient and energetically friendly production process needs to be developed that overcomes the extensive energy consumption of shear-based existing processes. This paper analyses how the charge content influences the mechanical energy that is needed to disintegrate a cellulose fiber. The introduction of charge groups (carboxylate) is achieved through periodate oxidation followed by chlorite oxidation reactions, carried out to different extents. Modified samples are then subjected to different levels of controlled mechanical energy and the yields of three different fractions, separated by size, are obtained. The process produces highly functionalized cellulose nanofibers based almost exclusively on chemical reactions, thus avoiding the use of intensive mechanical energy in the process and consequently reducing drastically the energy consumption.

“Raft” Formation by Two-Dimensional Self-Assembly of Block Copolymer Rod Micelles in Aqueous Solution†

Block copolymers can form a broad range of self-assembled aggregates. In solution, planar assemblies usually form closed structures such as vesicles; thus, free-standing sheet formation can be challenging. While most polymer single crystals are planar, their growth usually occurs by uptake of individual chains. Here we report a novel lamella formation mechanism: core-crystalline spherical micelles link up to form rods in solution, which then associate to yield planar arrays. For the system of poly(ethylene oxide)-block-polycaprolactone in water, co-assembly with homopolycaprolactone can induce a series of morphological changes that yield either rods or lamellae. The underlying lamella formation mechanism was elucidated by electron microscopy, while light scattering was used to probe the kinetics. The hierarchical growth of lamellae from one-dimensional rod subunits, which had been formed from spherical assemblies, is novel and controllable in terms of product size and aspect ratio.

Copper Removal Using Electrosterically Stabilized Nanocrystalline Cellulose

Removal of heavy metal ions such as copper using an efficient and low-cost method with low ecological footprint is a critical process in wastewater treatment, which can be achieved in a liquid phase using nanoadsorbents such as inorganic nanoparticles. Recently, attention has turned toward developing sustainable and environmentally friendly nanoadsorbents to remove heavy metal ions from aqueous media. Electrosterically stabilized nanocrystalline cellulose (ENCC), which can be prepared from wood fibers through periodate/chlorite oxidation, has been shown to have a high charge content and colloidal stability. Here, we show that ENCC scavenges copper ions by different mechanisms depending on the ion concentration. When the Cu(II) concentration is low (C0≲200 ppm), agglomerates of starlike ENCC particles appear, which are broken into individual starlike entities by shear and Brownian motion, as evidenced by photometric dispersion analysis, dynamic light scattering, and transmission electron microscopy. On the other hand, at higher copper concentrations, the aggregate morphology changes from starlike to raftlike, which is probably due to the collapse of protruding dicarboxylic cellulose (DCC) chains and ENCC charge neutralization by copper adsorption. Such raftlike structures result from head-to-head and lateral aggregation of neutralized ENCCs as confirmed by transmission electron microscopy. As opposed to starlike aggregates, the raftlike structures grow gradually and are prone to sedimentation at copper concentrations C0≳500 ppm, which eliminates a costly separation step in wastewater treatment processes. Moreover, a copper removal capacity of ∼185 mg g(-1) was achieved thanks to the highly charged DCC polyanions protruding from ENCC. These properties along with the biorenewability make ENCC a promising candidate for wastewater treatment, in which fast, facile, and low-cost removal of heavy metal ions is desired most.

Dendrimers as bactericides

Hyperbranched and monodisperse macromolecules of nanodimensions, commonly referred to as dendrimers, have offered significant potential in addressing key issues in biology. In addition, their monodisperse nature and a generally described globular architecture with high surface group density, make them very coveted candidates as antimicrobial agents. Here, we provide an overview of what has been accomplished in exploring the potential of dendrimers as bactericides, as well as an analysis of the factors influencing their biocidal activity.

Evolution of Pseudomonas aeruginosa Virulence as a Result of Phage Predation

ABSTRACT The rapid increase in the emergence of antibiotic-resistant bacteria has attracted attention to bacteriophages for treating and preventing bacterial infections. Bacteriophages can drive the diversification of Pseudomonas aeruginosa, giving rise to phage-resistant variants with different phenotypes from their ancestral hosts. In this study, we sought to investigate the effect of phage resistance on cytotoxicity of host populations toward cultured mammalian cells. The library of phage-resistant P. aeruginosa PAO1 variants used was developed previously via experimental evolution of an isogenic host population using phages PP7 and E79. Our results presented herein indicate that the phage-resistant variants developed in a heterogeneous phage environment exhibit a greater ability to impede metabolic action of cultured human keratinocytes and have a greater tendency to cause membrane damage even though they cannot invade the cells in large numbers. They also show a heightened resistance to phagocytosis by model murine macrophages. Furthermore, all isolates produced higher levels of at least one of the secreted virulence factors, namely, total proteases, elastase, phospholipase C, and hemolysins. Reverse transcription-quantitative PCR (RT-qPCR) revealed upregulation in the transcription of a number of genes associated with virulence of P. aeruginosa for the phage-resistant variants. The results of this study indicate a significant change in the in vitro virulence of P. aeruginosa following phage predation and highlight the need for caution in the selection and design of phages and phage cocktails for therapeutic use.

Bacterial Capture Efficiency and Antimicrobial Activity of Phage-Functionalized Model Surfaces

The rise of antibiotic-resistant bacteria has directed substantial attention toward the use of bacteriophages as a means to control bacterial populations. It has been proposed that bacteriophages can be applied as a coating on surfaces in healthcare settings or on indwelling medical devices to create an antimicrobial surface. In this study, antimicrobial model surfaces functionalized with five different types of bacteriophage were prepared and characterized with X-ray photoelectron spectroscopy and atomic force microscopy. The bacterial capture efficiency of these functionalized surfaces was studied for two common bacteria, Escherichia coli and Salmonella typhimurium. Binding of the phages to a solid surface affected their biofunctionality as expressed by the capture efficiency and rate of host membrane disruption. Moreover, the size and shape of the bacteriophage and positioning of its specific binding proteins significantly affected its bacterial capture capability in the immobilized state. Symmetric bacteriophages were found to be a better choice for antibacterial surfaces compared to more asymmetric tailed bacteriophages. Immobilized phages were found to disrupt the membranes of attached bacteria and are thus proposed as a candidate for antimicrobial surfaces.

Formation of biofilms under phage predation: considerations concerning a biofilm increase.

Bacteriophages are emerging as strong candidates for combating bacterial biofilms. However, reports indicating that host populations can, in some cases, respond to phage predation by an increase in biofilm formation are of concern. This study investigates whether phage predation can enhance the formation of biofilm and if so, if this phenomenon is governed by the emergence of phage-resistance or by non-evolutionary mechanisms (eg spatial refuge). Single-species biofilms of three bacterial pathogens (Pseudomonas aeruginosa, Salmonella enterica serotype Typhimurium, and Staphylococcus aureus) were pretreated and post-treated with species-specific phages. Some of the phage treatments resulted in an increase in the levels of biofilm of their host. It is proposed that the phenotypic change brought about by acquiring phage resistance is the main reason for the increase in the level of biofilm of P. aeruginosa. For biofilms of S. aureus and S. enterica Typhimurium, although resistance was detected, increased formation of biofilm appeared to be a result of non-evolutionary mechanisms.

Intrinsic viscosity of aqueous suspensions of cellulose nanofibrils

Cellulose nanofibrils (CNF) from wood fibers are of increasing interest to industry because they are from renewable sources and are biodegradable. Owing to their high aspect ratio, they produce viscous suspensions and stiff gels that are strengthened by interfibrillar hydrogen bonds. In this study, the viscosity of aqueous CNF suspensions, at dilute concentrations (