Thereza Christina Vessoni Penna

The efficacy of chemical agents in cleaning and disinfection programs

BackgroundDue to the growing number of outbreaks of infection in hospital nurseries, it becomes essential to set up a sanitation program that indicates that the appropriate chemical agent was chosen for application in the most effective way.MethodFor the purpose of evaluating the efficacy of a chemical agent, the minimum inhibitory concentration (MIC) was reached by the classic method of successive broth dilutions. The reference bacteria utilized were Bacillus subtilis var. globigii ATCC 9372, Bacillus stearothermophilus ATCC 7953, Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923. The strains of Enterobacter cloacae IAL 1976 (Adolfo Lutz Institute), Serratia marcescens IAL 1478 and Acinetobactev calcoaceticus IAL 124 (ATCC 19606), were isolated from material collected from babies involved in outbreaks of infection in hospital nurseries.ResultsThe MIC intervals, which reduced bacteria populations over 08 log10, were: 59 to 156 mg/L of quaternarium ammonium compounds (QACs); 63 to 10000 mg/L of chlorhexidine digluconate; 1375 to 3250 mg/L of glutaraldehyde; 39 to 246 mg/L of formaldehyde; 43750 to 87500 mg/L of isopropanol or ethanol; 1250 to 6250 mg/L of iodine in polyvinyl-pyrolidone complexes, 150 to 4491 mg/L of chlorine-releasing-agents (CRAs); 469 to 2500 mg/L of hydrogen peroxide; and, 2310 to 18500 mg/L of peracetic acid.ConclusionsChlorhexidine showed non inhibitory activity over germinating spores. A. calcoaceticus, was observed to show resistance to the majority of the agents tested, followed by E. cloacae and S. marcescens.

Determination of decimal reduction time (D value) of chemical agents used in hospitals for disinfection purposes

BackgroundPrior to the selection of disinfectants for low, intermediate and high (sterilizing) levels, the decimal reduction time, D-value, for the most common and persistent bacteria identified at a health care facility should be determined.MethodsThe D-value was determined by inoculating 100 mL of disinfecting solution with 1 mL of a bacterial suspension (104 – 105 CFU/mL for vegetative and spore forms). At regular intervals, 1 mL aliquots of this mixture were transferred to 8 mL of growth media containing a neutralizing agent, and incubated at optimal conditions for the microorganism.ResultsThe highest D-values for various bacteria were determined for the following solutions: (i) 0.1% sodium dichloroisocyanurate (pH 7.0) – E. coli and A. calcoaceticus (D = 5.9 min); (ii) sodium hypochlorite (pH 7.0) at 0.025% for B. stearothermophilus (D = 24 min), E. coli and E. cloacae (D = 7.5 min); at 0.05% for B. stearothermophilus (D = 9.4 min) and E. coli (D = 6.1 min) and 0.1% for B. stearothermophilus (D = 3.5 min) and B. subtilis (D = 3.2 min); (iii) 2.0% glutaraldehyde (pH 7.4) – B. stearothermophilus, B. subtilis (D = 25 min) and E. coli (D = 7.1 min); (iv) 0.5% formaldehyde (pH 6.5) – B. subtilis (D = 11.8 min), B. stearothermophilus (D = 10.9 min) and A. calcoaceticus (D = 5.2 min); (v) 2.0% chlorhexidine (pH 6.2) – B. stearothermophilus (D = 9.1 min), and at 0.4% for E. cloacae (D = 8.3 min); (vi) 1.0% Minncare® (peracetic acid and hydrogen peroxide, pH 2.3) – B. stearothermophilus (D = 9.1 min) and E. coli (D = 6.7 min).ConclusionsThe suspension studies were an indication of the disinfectant efficacy on a surface. The data in this study reflect the formulations used and may vary from product to product. The expected effectiveness from the studied formulations showed that the tested agents can be recommended for surface disinfection as stated in present guidelines and emphasizes the importance and need to develop routine and novel programs to evaluate product utility.

Minimal inhibitory concentration (MIC) determination of disinfectant and/or sterilizing agents

Due to the growing number of outbreaks of infection in hospital and nurseries, it becomes essential to set up a sanitation program that indicates that the appropriate chemical agent was chosen for application in the most effective way. Validating the effectiveness of decontamination and disinfection is an important and often challenging task. In order to study and compare the behavior of selected microorganisms, they were submitted to minimal inhibitory concentration (MIC). The MIC intervals, which reduced bacteria populations over 6 log10, were: 59 to 156 mg/L of quaternary ammonium compounds (QACs); 63 to 10000 mg/L of chlorhexidine; 1375 to 3250 mg/L of glutaraldehyde; 39 to 246 mg/L of formaldehyde; 43750 to 87500 mg/L of ethanol; 1250 to 6250 mg/L of iodine in polyvinyl-pyrolidone complexes, 150 to 4491 mg/L of chlorine-releasing-agents (CRAs) and 469 to 2500 mg/L of hydrogen peroxide. Chlorhexidine showed non inhibitory activity over germinating spores. A. calcoaceticus showed resistance to the majority of the agents tested, followed by E. cloacae and S. marcescens.

Perspectives on Bioenergy and Biotechnology in Brazil

Brazil is one of the world’s largest producers of alcohol from biomass at low cost and is responsible for more than 1 million direct jobs. In 1973, the Brazilian Program of Alcohol (Proalcool) stimulated the creation of a bioethanol industry that has led to large economic, social, and scientific improvements. In the year 1984, 94.5% of Brazil’s cars used bioethanol as fuel. In 2003/2004, 350.3 million of sugarcane produced 24.2 million t of sugar and 14.4 billion L of ethanol for an average 4.3 million cars using ethanol. Since its inception, cumulative investment in Proalcool totals US

The influence of nisin on the thermal resistance of Bacillus cereus.

11 billion, and Brazil has saved US

LPS removal from an E. coli fermentation broth using aqueous two-phase micellar system

27 billion in oil imports. The ethanol production industry from sugarcane generates 152 times more jobs than would have been the case if the same amount of fuel was produced from petroleum, and the use of ethanol as a fuel is advantageous for environmental reasons. In 2003, one of the biggest Brazilian ethanol industries started consuming 50% of the residual sugarcane bagasse to produce electrical energy (60 MW), a new alternative use of bioenergy for the Brazilian market. Other technologies for commercial uses of bagasse are in development, such as in the production of natural fibers, sweeteners (glucose and xylitol), single-cell proteins, lactic acid, microbial enzymes, and many other products based on fermentations (submerged and semisolid). Furthermore, studies aimed at the increase in the biosynthesis of sucrose and, consequently, ethanol productivity are being conducted to understand the genetics of sugarcane. Although, at present, there remain technical obstacles to the economic use of some ethanol industry residues, several research projects have been carried out and useful data generated. Efficient utilization of ethanol industry residues has created new opportunities for new value-added products, especially in Brazil, where they are produced in high quantities.

Optimization of Nisin Production by Lactococcus lactis

Decimal reduction times (D-values) at cooking and autoclaving temperatures (80 to 120 degrees C) of spores of Bacillus cereus ATCC 1479-8 in rice and milk (13% wt/vol) supplemented with nisin (25 microg/ml) were evaluated. The mean D-values at 97.8 degrees C in cooked white rice, phosphate buffer (pH 7.0), and rice water (pH 6.7) were 3.62, 1,99, and 1.34 min, respectively. From 80 to 100 degrees C, the mean reduction in D-values due to the addition of nisin to milk was 40%. The D-value at 110 degrees C was approximately 0.86 min for milk (control) and milk with nisin. The z-values ranged from 7.32 degrees C (phosphate buffer) to 10.37 degrees C (milk control).

Nisin production utilizing skimmed milk aiming to reduce process cost

In biotechnology, endotoxin (LPS) removal from recombinant proteins is a critical and challenging step in the preparation of injectable therapeutics, as endotoxin is a natural component of bacterial expression systems widely used to manufacture therapeutic proteins. The viability of large‐scale industrial production of recombinant biomolecules of pharmaceutical interest significantly depends on the separation and purification techniques used. The aim of this work was to evaluate the use of aqueous two‐phase micellar system (ATPMS) for endotoxin removal from preparations containing recombinant proteins of pharmaceutical interest, such as green fluorescent protein (GFPuv). Partition assays were carried out initially using pure LPS, and afterwards in the presence of E. coli cell lysate. The ATPMS technology proved to be effective in GFPuv recovery, preferentially into the micelle‐poor phase (KGFPuv < 1.00), and LPS removal into the micelle‐rich phase (%REMLPS > 98.00%). Therefore, this system can be exploited as the first step for purification in biotechnology processes for removal of higher LPS concentrations.

Thermal stability of recombinant green fluorescent protein (GFPuv) at various pH values.

The production of nisin by batch culture of Lactococcus lactis ATCC 11454 in MRS broth (pH 6.5), as treated in 30 assays, that were set up by a fractional factorial design of two levels (2[4-1]), was improved. The minimum and maximum concentrations of sucrose (5.0-12.5 g/L), asparagine (7.5-75 g/L), potassium phosphate (6.0-18.0 g/L), and Tween-80 (1.0-6.6 g/L) were added to MRS broth. The best nisin activities ranged from 1.5 x 10(4) to 1.8 x 10(4) arbitrary units (AU)/mL for the maximum levels of sucrose, asparagine, and monobasic potassium phosphate, and for the minimum concentration of Tween-80. The best following proportions between nutrients were adopted as optimum for maximum specific nisin productivity of about 6.0 mg/mg of dry cell weight (related to 2.5 mg of pure nisin preparation with a specific activity of 1.0 x 10(5) AU/mL): C/N = 0.17, C/P = 0.69, N/P = 4.17 (C = sucrose, N = asparagine, P = phosphate, T = Tween-80).

Stability of green fluorescent protein (GFP) in chlorine solutions of varying pH.

Nisin is a natural additive for conservation of food, pharmaceutical, and dental products and can be used as a therapeutic agent. Nisin inhibits the outgrowth of spores, the growth of a variety of Gram-positive and Gram-negative bacteria. This study was performed to optimize large-scale nisin production in skimmed milk and subproducts aiming at low-costs process and stimulating its utilization. Lactococcus lactis American Type Culture Collection (ATCC) 11454 was developed in a rotary shaker (30°C/36 h/100 rpm) in diluted skimmed milk and nisin activity, growth parameters, and media components were also studied. Nisin activity in growth media was expressed in arbitrary units (AU/mL) and converted to standard nisin concentration (Nisaplin®, 25 mg of pure nisin is 1.0×106 AU/mL). Nisin activity in skimmed milk 2.27 gtotal solids was up to threefold higher than transfers in skimmed milk 4.54 gtotal solids and was up to 85-fold higher than transfers in skimmed milk 1.14 gtotal solids. L. lactis was assayed in a New Brunswick fermentor with 1.5 L of diluted skimmed milk (2.27 gtotal solids) and airflow of 1.5 mL/min (30°C/36/200 rpm), without pH control. In this condition nisin activity was observed after 4 h (45.07 AU/mL) and in the end of 36 h process (3312.07 AU/mL). This work shows the utilization of a low-cost growth medium (diluted skimmed milk) to nisin production with wide applications. Furthermore, milk subproducts (milk whey) can be exploited in nisin production, because in Brazil 50% of milk whey is disposed with no treatment in rivers and because of high organic matter concentrations it is considered an important pollutant. In this particular case an optimized production of an antimicrobial would be lined up with industrial disposal recycling.