Thierry Beguiristain

Real-Time PCR quantification of PAH-ring hydroxylating dioxygenase (PAH-RHDα) genes from Gram positive and Gram negative bacteria in soil and sediment samples

Real-Time PCR based assays were developed to quantify Gram positive (GP) and Gram negative (GN) bacterial populations that are capable of degrading the polycyclic aromatic hydrocarbons (PAH) in soil and sediment samples with contrasting contamination levels. These specific and sensitive Real-Time PCR assays were based on the quantification of the copy number of the gene that encodes the alpha subunit of the PAH-ring hydroxylating dioxygenases (PAH-RHDalpha), involved in the initial step of the aerobic metabolism of PAH. The PAH-RHDalpha-GP primer set was designed against the different allele types present in the data base (narAa, phdA/pdoA2, nidA/pdoA1, nidA3/fadA1) common to the Gram positive PAH degraders such as Rhodococcus, Mycobacterium, Nocardioides and Terrabacter strains. The PAH-RHDalpha-GN primer set was designed against the genes (nahAc, nahA3, nagAc, ndoB, ndoC2, pahAc, pahA3, phnAc, phnA1, bphAc, bphA1, dntAc and arhA1) common to the Gram negative PAH degraders such as Pseudomonas, Ralstonia, Commamonas, Burkholderia, Sphingomonas, Alcaligenes, Polaromonas strains. The PCR clones for DNA extracted from soil and sediment samples using the designed primers showed 100% relatedness to the PAH-RHDalpha genes targeted. Deduced from highly sensitive Real-Time PCR quantification, the ratio of PAH-RHDalpha gene relative to the 16S rRNA gene copy number showed that the PAH-bacterial degraders could represent up to 1% of the total bacterial community in the PAH-contaminated sites. This ratio highlighted a positive correlation between the PAH-bacterial biodegradation potential and the PAH-contamination level in the environmental samples studied.

Spatial Distribution of Bacterial Communities and Phenanthrene Degradation in the Rhizosphere of Lolium perenne L.

ABSTRACT Rhizodegradation of organic pollutants, such as polycyclic aromatic hydrocarbons, is based on the effect of root-produced compounds, known as exudates. These exudates constitute an important and constant carbon source that selects microbial populations in the plant rhizosphere, modifying global as well as specific microbial activities. We conducted an experiment in two-compartment devices to show the selection of bacterial communities by root exudates and phenanthrene as a function of distance to roots. Using direct DNA extraction, PCR amplification, and thermal gradient gel electrophoresis screening, bacterial population profiles were analyzed in parallel to bacterial counts and quantification of phenanthrene biodegradation in three layers (0 to 3, 3 to 6, and 6 to 9 mm from root mat) of unplanted-polluted (phenanthrene), planted-polluted, and planted-unpolluted treatments. Bacterial community differed as a function of the distance to roots, in both the presence and the absence of phenanthrene. In the planted and polluted treatment, biodegradation rates showed a strong gradient with higher values near the roots. In the nonplanted treatment, bacterial communities were comparable in the three layers and phenanthrene biodegradation was high. Surprisingly, no biodegradation was detected in the section of planted polluted treatment farthest from the roots, where the bacterial community structure was similar to those of the nonplanted treatment. We conclude that root exudates and phenanthrene induce modifications of bacterial communities in polluted environments and spatially modify the activity of degrading bacteria.

Influence of Vegetation on the In Situ Bacterial Community and Polycyclic Aromatic Hydrocarbon (PAH) Degraders in Aged PAH-Contaminated or Thermal-Desorption-Treated Soil

ABSTRACT The polycyclic aromatic hydrocarbon (PAH) contamination, bacterial community, and PAH-degrading bacteria were monitored in aged PAH-contaminated soil (Neuves-Maisons [NM] soil; with a mean of 1,915 mg of 16 PAHs·kg−1 of soil dry weight) and in the same soil previously treated by thermal desorption (TD soil; with a mean of 106 mg of 16 PAHs·kg−1 of soil dry weight). This study was conducted in situ for 2 years using experimental plots of the two soils. NM soil was colonized by spontaneous vegetation (NM-SV), planted with Medicago sativa (NM-Ms), or left as bare soil (NM-BS), and the TD soil was planted with Medicago sativa (TD-Ms). The bacterial community density, structure, and diversity were estimated by real-time PCR quantification of the 16S rRNA gene copy number, temporal thermal gradient gel electrophoresis fingerprinting, and band sequencing, respectively. The density of the bacterial community increased the first year during stabilization of the system and stayed constant in the NM soil, while it continued to increase in the TD soil during the second year. The bacterial community structure diverged among all the plot types after 2 years on site. In the NM-BS plots, the bacterial community was represented mainly by Betaproteobacteria and Gammaproteobacteria. The presence of vegetation (NM-SV and NM-Ms) in the NM soil favored the development of a wider range of bacterial phyla (Alphaproteobacteria, Betaproteobacteria, Gammaproteobacteria, Verrucomicrobia, Actinobacteria, Firmicutes, and Chloroflexi) that, for the most part, were not closely related to known bacterial representatives. Moreover, under the influence of the same plant, the bacterial community that developed in the TD-Ms was represented by different bacterial species (Alphaproteobacteria, Betaproteobacteria, Gammaproteobacteria, and Actinobacteria) than that in the NM-Ms. During the 2 years of monitoring, the PAH concentration did not evolve significantly. The abundance of gram-negative (GN) and gram-positive (GP) PAH-degrading bacteria was estimated by real-time PCR quantification of specific functional genes encoding the α subunit of PAH-ring hydroxylating dioxygenase (PAH-RHDα). The percentage of the PAH-RHDα GN bacterial genes relative to 16S rRNA gene density decreased with time in all the plots. The GP PAH-RHDα bacterial gene proportion decreased in the NM-BS plots but stayed constant or increased under vegetation influence (NM-SV, NM-Ms, and TD-Ms).

In Situ Assessment of Phytotechnologies for Multicontaminated Soil Management

Due to human activities, large volumes of soils are contaminated with organic pollutants such as polycyclic aromatic hydrocarbons, and very often by metallic pollutants as well. Multipolluted soils are therefore a key concern for remediation. This work presents a long-term evaluation of the fate and environmental impact of the organic and metallic contaminants of an industrially polluted soil under natural and plant-assisted conditions. A field trial was followed for four years according to six treatments in four replicates: unplanted, planted with alfalfa with or without mycorrhizal inoculation, planted with Noccaea caerulescens, naturally colonized by indigenous plants, and thermally treated soil planted with alfalfa. Leaching water volumes and composition, PAH concentrations in soil and solutions, soil fauna and microbial diversity, soil and solution toxicity using standardized bioassays, plant biomass, mycorrhizal colonization, were monitored. Results showed that plant cover alone did not affect total contaminant concentrations in soil. However, it was most efficient in improving the contamination impact on the environment and in increasing the biological diversity. Leaching water quality remained an issue because of its high toxicity shown by micro-algae testing. In this matter, prior treatment of the soil by thermal desorption proved to be the only effective treatment.

Differential effects of AM fungal isolates on Medicago truncatula growth and metal uptake in a multimetallic (Cd, Zn, Pb) contaminated agricultural soil

Toxic metal accumulation in soils of agricultural interest is a serious problem needing more attention, and investigations on soil–plant metal transfer must be pursued to better understand the processes involved in metal uptake. Arbuscular mycorrhizal (AM) fungi are known to influence metal transfer in plants by increasing plant biomass and reducing metal toxicity to plants even if diverging results were reported. The effects of five AM fungi isolated from metal contaminated or non-contaminated soils on metal (Cd, Zn) uptake by plant and transfer to leachates was assessed with Medicago truncatula grown in a multimetallic contaminated agricultural soil. Fungi isolated from metal-contaminated soils were more effective to reduce shoot Cd concentration. Metal uptake capacity differed between AM fungi and depended on the origin of the isolate. Not only fungal tolerance and ability to reduce metal concentrations in plant but also interactions with rhizobacteria affected heavy metal transfer and plant growth. Indeed, thanks to association with nodulating rhizobacteria, one Glomus intraradices inoculum increased particularly plant biomass which allowed exporting twofold more Cd and Zn in shoots as compared to non-mycorrhizal treatment. Cd concentrations in leachates were variable among fungal treatments, but can be significantly influenced by AM inoculation. The differential strategies of AM fungal colonisation in metal stress conditions are also discussed.

Temporal temperature gradient gel electrophoresis (TTGE) analysis of arbuscular mycorrhizal fungi associated with selected plants from saline and metal polluted environments

Some plants are more mycorrhizal than others and mycorrhizal colonisation of plants in extreme environments is frequently additionally reduced due to decreased spore density and/or diversity and therefore frequently overlooked. We analysed two plant species from both metal polluted and saline enriched soils with differing mycorrhizal colonisation levels/status using classical and molecular methods. The selected plant species were Sesleria caerulea (L.) Ard. and Thlaspi praecox Wulfen from a metal polluted site, and Limonium angustifolium (Tausch) Degen [Statice serotina Rchb., L. vulgare Mill. subsp. Serotinum (Rchb.) Gams] and Salicornia europaea L. from the Sečovlje salterns in Slovenia. Despite the high mycorrhizal frequencies (F%) observed, the presence of arbuscules (A%) was at best low in S. caerulea and T. praecox, and undetectable in L. angustifolium and S. europaea. Temporal temperature gradient gel electrophoresis (TTGE) was applied to field-collected samples from both burdened environments and proved to be an effective technique for rapid profiling and identification of arbuscular mycorrhizal fungi (AMF). Sequencing and phylogenetic analysis confirmed the association of AMF of the genus Glomus with roots of all four plant species. This is the first report on the identification and profiling of Glomeromycota in the field-collected Cd/Zn metal hyperaccumulator T. praecox growing at a highly metal polluted site, as well as in L. angustifolium and S. europaea collected in a saline environment. The identification of AMF from both ecosystems only partially resembles previous identifications on the basis of spores.

Changes in soil diversity and global activities following invasions of the exotic invasive plant, Amaranthus viridis L., decrease the growth of native sahelian Acacia species

The objectives of this study were to determine whether the invasive plant Amaranthus viridis influenced soil microbial and chemical properties and to assess the consequences of these modifications on native plant growth. The experiment was conducted in Senegal at two sites: one invaded by A. viridis and the other covered by other plant species. Soil nutrient contents as well as microbial community density, diversity and functions were measured. Additionally, five sahelian Acacia species were grown in (1) soil disinfected or not collected from both sites, (2) uninvaded soil exposed to an A. viridis plant aqueous extract and (3) soil collected from invaded and uninvaded sites and inoculated or not with the arbuscular mycorrhizal (AM) fungus Glomus intraradices. The results showed that the invasion of A. viridis increased soil nutrient availability, bacterial abundance and microbial activities. In contrast, AM fungi and rhizobial development and the growth of Acacia species were severely reduced in A. viridis-invaded soil. Amaranthus viridis aqueous extract also exhibited an inhibitory effect on rhizobial growth, indicating an antibacterial activity of this plant extract. However, the inoculation of G. intraradices was highly beneficial to the growth and nodulation of Acacia species. These results highlight the role of AM symbiosis in the processes involved in plant coexistence and in ecosystem management programs that target preservation of native plant diversity.

Impact of clay mineral, wood sawdust or root organic matter on the bacterial and fungal community structures in two aged PAH-contaminated soils.

The high organic pollutant concentration of aged polycyclic aromatic hydrocarbon (PAH)-contaminated wasteland soils is highly recalcitrant to biodegradation due to its very low bioavailability. In such soils, the microbial community is well adapted to the pollution, but the microbial activity is limited by nutrient availability. Management strategies could be applied to modify the soil microbial functioning as well as the PAH contamination through various amendment types. The impact of amendment with clay minerals (montmorillonite), wood sawdust and organic matter plant roots on microbial community structure was investigated on two aged PAH-contaminated soils both in laboratory and 1-year on-site pot experiments. Total PAH content (sum of 16 PAHs of the US-EPA list) and polar polycyclic aromatic compounds (pPAC) were monitored as well as the available PAH fraction using the Tenax method. The bacterial and fungal community structures were monitored using fingerprinting thermal gradient gel electrophoresis (TTGE) method. The abundance of bacteria (16S rRNA genes), fungi (18S rRNA genes) and PAH degraders (PAH-ring hydroxylating dioxygenase and catechol dioxygenase genes) was followed through qPCR assays. Although the treatments did not modify the total and available PAH content, the microbial community density, structure and the PAH degradation potential changed when fresh organic matter was provided as sawdust and under rhizosphere influence, while the clay mineral only increased the percentage of catechol-1,2-dioxygenase genes. The abundance of bacteria and fungi and the percentage of fungi relative to bacteria were enhanced in soil samples supplemented with wood sawdust and in the plant rhizospheric soils. Two distinct fungal populations developed in the two soils supplemented with sawdust, i.e. fungi related to Chaetomium and Neurospora genera and Brachyconidiellopsis and Pseudallescheria genera, in H and NM soils respectively. Wood sawdust amendment favoured the development of PAH-degrading bacteria holding Gram-negative PAH-ring hydroxylating dioxygenase, catechol-1,2-dioxygenase and catechol-2,3-dioxygenase genes. Regarding the total community structure, bacteria closely related to Thiobacillus (β-Proteobacteria) and Steroidobacter (γ-Proteobacteria) genera were favoured by wood sawdust amendment. In both soils, plant rhizospheres induced the development of fungi belonging to Ascomycota and related to Alternaria and Fusarium genera. Bacteria closely related to Luteolibacter (Verrucomicrobia) and Microbacterium (Actinobacteria) were favoured in alfalfa and ryegrass rhizosphere.

Water and phosphorus content affect PAH dissipation in spiked soil planted with mycorrhizal alfalfa and tall fescue.

Polycyclic aromatic hydrocarbon (PAH) dissipation efficiency can be increased in the plant rhizosphere, but may be affected by various environmental factors. We investigated the effects of the watering regime and phosphorus concentration on PAH dissipation in the rhizosphere of mycorrhizal plants in a pot experiment. Two plant species, alfalfa (Medicago sativa) and tall fescue (Festuca arundinacea), were co-cultured and inoculated with an arbuscular mycorrhizal (AM) fungus (Glomus intraradices) in PAH (phenanthrene (PHE)=500 mg kg(-1), pyrene (PYR)=500 mg kg(-1), dibenzo(a,h)anthracene (DBA)=65 mg kg(-1)) spiked agricultural soil for 6 weeks. Treatments with different phosphorus concentrations and watering regimes were compared. The PHE dissipation reached 90% in all treatments and was not affected by the treatments. The major finding was the significant positive impact of mycorrhizal plants on the dissipation of high molecular weight PAH (DBA) in high-water low-phosphorus treatment. Such an effect was not observed in high-water high-phosphorus and low-water low-phosphorus treatments, where AM colonization was very low. A positive linear relationship was detected between PYR dissipation and the percentage of Gram-positive PAH-ring hydroxylating dioxygenase genes in high-water high-phosphorus treatments, but not in the other two treatments with lower phosphorus concentrations and water contents. Such results indicated that the phosphorus and water regime were important parameters for the dissipation of HMW-PAH.

Microbial Diversity During Cellulose Decomposition in Different Forest Stands: I. Microbial Communities and Environmental Conditions

We studied the effect of forest tree species on a community of decomposers that colonize cellulose strips. Both fungal and bacterial communities were targeted in a native forest dominated by beech and oak and 30-year-old beech and spruce plantations, growing in similar ecological conditions in the Breuil-Chenue experimental forest site in Morvan (France). Microbial ingrowths from the 3rd to 10th month of strip decomposition (May to December 2004) were studied. Community composition was assessed using temperature gradient gel electrophoresis with universal fungal (ITS1F, ITS2) and bacterial (1401r, 968f) primers. Soil temperature and moisture as well as fungal biomass were also measured to give additional information on decomposition processes. Changing the dominant tree species had no significant influence in the number of decomposer species. However, decomposer community composition was clearly different. If compared to the native forest, where community composition highly differed, young monocultures displayed similar species structure for fungi and bacteria. Both species numbers and community composition evolved during the decay process. Time effect was found to be more important than tree species. Nevertheless, the actual environmental conditions and seasonal effect seemed to be even more determining factors for the development of microbial communities. The course and correlations of the explored variables often differed between tree species, although certain general trends were identified. Fungal biomass was high in summer, despite that species richness (SR) decreased and conversely, that high SR did not necessarily mean high biomass values. It can be concluded that the growth and development of the microbiological communities that colonized a model material in situ depended on the combination of physical and biological factors acting collectively and interdependently at the forest soil microsite.