Thomas Blon

Magnetic configurations of 30 nm iron nanocubes studied by electron holography.

Ferromagnetic nanomaterials exhibit unique magnetic properties common to materials with dimensions approaching the atomic scale and have potential applications in magnetic data storage. Technological applications, however, require that the detailed magnetic behaviors and configurations of individual and interacting magnetic nano-objects be clarified. We determined the magnetic remnant configurations in single crystalline 30 nm Fe nanocubes and groups of nanocubes using off-axis electron holography in a transmission electron microscope. Our measurements on an isolated cube reveal a vortex state whose core size has been determined. Two neighboring nanocubes with adjacent {100} surfaces exhibit a ferromagnetic dipolar coupling, while similar magnetic interactions between four cubes in a square arrangement induce a bending of the magnetic induction, i.e., a magnetic flux closure state. The various configurations were successfully simulated by micromagnetic calculations.

Ultrasmall iron nanoparticles: Effect of size reduction on anisotropy and magnetization

Stable iron nanoparticles have been synthesised by the decomposition of {Fe(N[Si(CH3)3]2)2}2 under dihydrogen pressure. Those conditions lead to a system of monodisperse and metallic nanoparticles which diameter is less than 2nm and stabilized by HN[Si(CH3)3]2. The magnetization is found to be MS=1.92μB∕at., i.e., 10% lower than the bulk value. The Mossbauer spectrum is fitted by two contributions of metallic iron. The magnetic anisotropy energy constant increases up to 5.2×105J∕m3, i.e., ten times the bulk one.

Magnetism of single-crystalline Co nanorods

We report on the synthesis and preparation of oriented nanomaterials of single crystalline metallic Co nanorods of 6 nm in diameters and two different aspect ratios (7 and 15). They display optimized magnetic properties, with a spontaneous magnetization just below the bulk one, and large coercive fields (up to 6.5 kOe at 300 K) as a result of coherent switching (i.e., Stoner and Wohlfarth mechanism). We measured a strong effective anisotropy very close to the expected value resulting from the sum of shape and magnetocrystalline contributions.

Solution Epitaxial Growth of Cobalt Nanowires on Crystalline Substrates for Data Storage Densities beyond 1 Tbit/in2

The implementation of nano-objects in numerous emerging applications often demands their integration in macroscopic devices. Here we present the bottom-up epitaxial solution growth of high-density arrays of vertical 5 nm diameter single-crystalline metallic cobalt nanowires on wafer-scale crystalline metal surfaces. The nanowires form regular hexagonal arrays on unpatterned metallic films. These hybrid heterostructures present an important perpendicular magnetic anisotropy and pave the way to a high density magnetic recording device, with capacities above 10 Terabits/in(2). This method bypasses the need of assembling and orientating free colloidal nanocrystals on surfaces. Its generalization to other materials opens new perspectives toward many applications.

Room-Temperature Tunnel Magnetoresistance in Self-Assembled Chemically Synthesized Metallic Iron Nanoparticles

We report on room temperature magnetoresistance in networks of chemically synthesized metallic Fe nanoparticles surrounded by two types of organic barriers. Electrical properties, featuring Coulomb blockade, and magnetotransport measurements show that this magnetoresistance arises from spin-dependent tunnelling, so the organic ligands stabilizing the nanoparticles are efficient spin-conservative tunnel barrier. These results demonstrate the feasibility of an all-chemistry approach for room temperature spintronics.

Co-Fe nanodumbbells: synthesis, structure, and magnetic properties.

We report the solution phase synthesis, the structural analysis, and the magnetic properties of hybrid nanostructures combining two magnetic metals. These nano-objects are characterized by a remarkable shape, combining Fe nanocubes on Co nanorods. The topological composition, the orientation relationship, and the growth steps have been studied by advanced electron microscopy techniques, such as HRTEM, electron tomography, and state-of-the-art 3-dimensional elemental mapping by EDX tomography. The soft iron nanocubes behave as easy nucleation centers that induce the magnetization reversal of the entire nanohybrid, leading to a drastic modification of the overall effective magnetic anisotropy.

Stabilizing vortices in interacting nano-objects: a chemical approach.

We report a chemical method to prepare metallic Fe porous nanocubes. The presence of pores embedded inside the cubes was attested by electron tomography. Thanks to electronic holography and micromagnetic simulations, we show that the presence of these defects stabilizes the vortices in assembly of interacting cubes. These results open new perspectives toward magnetic vortex stabilization at relatively low cost for various applications (microelectronics, magnetic recording, or biological applications).

Spin momentum transfer effects observed in electrodeposited Co/Cu/Co nanowires

Spin-transfer torque effects are reported in nanowires consisting in Co/Cu/Co trilayers electrodeposited on an anodic alumina template. Using a nanolithography process based on electrically controlled nanoindentation of the alumina template, we are able to investigate the spin transport properties of single nanowires at room temperature. For small applied magnetic fields, we have measured resistance changes above a critical direct-current (dc) injected current that corresponds to the change in resistance observed in the magnetoresistance curves at low current. We conclude that magnetic reversals are driven by a spin-polarized current. The critical current densities needed for the magnetization reversals are in the 10(7) A/cm(2) range and the dependence of the critical currents with the applied field is consistent with the spin-transfer mechanism. For large applied magnetic fields, the differential resistance exhibits some peaks that we attribute to the onset of high-frequency excitations of the free-layer magnetization. According to the high density of electrodeposited nanowires in alumina templates, our results are promising for synchronized spin-transfer oscillators. (c) 2007 American Institute of Physics.

Oriented Metallic Nano-Objects on Crystalline Surfaces by Solution Epitaxial Growth

Chemical methods offer the possibility to synthesize a large panel of nanostructures of various materials with promising properties. One of the main limitations to a mass market development of nanostructure based devices is the integration at a moderate cost of nano-objects into smart architectures. Here we develop a general approach by adapting the seed-mediated solution phase synthesis of nanocrystals in order to directly grow them on crystalline thin films. Using a Co precursor, single-crystalline Co nanowires are directly grown on metallic films and present different spatial orientations depending on the crystalline symmetry of the film used as a 2D seed for Co nucleation. Using films exposing 6-fold symmetry surfaces such as Pt(111), Au(111), and Co(0001), the Co heterogeneous nucleation and epitaxial growth leads to vertical nanowires self-organized in dense and large scale arrays. On the other hand, using films presenting 4-fold symmetry surfaces such as Pt(001) and Cu(001), the Co growth leads to slanted wires in discrete directions. The generality of the concept is demonstrated with the use of a Fe precursor which results in Fe nanostructures on metallic films with different growth orientations which depend on the 6-fold/4-fold symmetry of the film. This approach of solution epitaxial growth combines the advantages of chemistry in solution in producing shape-controlled and monodisperse metallic nanocrystals, and of seeded growth on an ad hoc metallic film that efficiently controls orientation through epitaxy. It opens attractive opportunities for the integration of nanocrystals in planar devices.

Concerted Growth and Ordering of Cobalt Nanorod Arrays as Revealed by Tandem in Situ SAXS-XAS Studies

The molecular and ensemble dynamics for the growth of hierarchical supercrystals of cobalt nanorods have been studied by in situ tandem X-ray absorption spectroscopy-small-angle X-ray scattering (XAS-SAXS). The supercrystals were obtained by reducing a Co(II) precursor under H2 in the presence of a long-chain amine and a long-chain carboxylic acid. Complementary time-dependent ex situ TEM studies were also performed. The experimental data provide critical insights into the nanorod growth mechanism and unequivocal evidence for a concerted growth-organization process. Nanorod formation involves cobalt nucleation, a fast atom-by-atom anisotropic growth, and a slower oriented attachment process that continues well after cobalt reduction is complete. Smectic-like ordering of the nanorods appears very early in the process, as soon as nanoparticle elongation appears, and nanorod growth takes place inside organized superlattices, which can be regarded as mesocrystals.