Thomas Ellingham

Comparative study of chemical and physical foaming methods for injection-molded thermoplastic polyurethane:

Thermoplastic polyurethane is one of the most versatile thermoplastic materials being used in a myriad of industrial and commercial applications. Thermoplastic polyurethane foams are finding new applications in various industries including the furniture, automotive, sportswear, and packaging industries because of their easy processability and desirable customizable properties. In this study, three methods of manufacturing injection molded low density foams were investigated and compared: (1) using chemical blowing agents, (2) using microcellular injection molding with N2 as the blowing agent, and (3) using a combination of supercritical gas-laden pellets injection molding foaming technology and microcellular injection molding processes using co-blowing agents CO2 and N2. Thermal, rheological, microscopic imaging, and mechanical testing were carried out on the molded samples with increasing amounts of blowing agents. The results showed that the use of physical blowing agents yielded softer foams, while the use of CO2 and N2 as co-blowing agents helped to manufacture foams with lower bulk densities, better microstructures, and lower hysteresis loss ratios. Chemical blowing agent-foamed thermoplastic polyurethane showed an earlier onset of degradation. The average cell size decreased and the cell density increased with the use of co-blowing agents. A further increase in gas saturation levels showed a degradation of microstructure by cell coalescence.

Effect of a cross-linking agent on the foamability of microcellular injection molded thermoplastic polyurethane

Thermoplastic polyurethane is one of the most versatile thermoplastic materials being used in a myriad of industrial and commercial applications. Thermoplastic polyurethane foams are finding new applications in various industries including furniture, automotive, sportswear, and packaging because of their easy processability and desirable, customizable properties. Low bulk density and a good foam microstructure are important properties that affect the mechanical properties, economics, and performance of the final product. In this study, the effect of a cross-linking agent on the foamability of microcellular injection molded thermoplastic polyurethane was studied with an aim to reduce the bulk density while achieving a consistent microstructure. Gel permeation chromatography showed an increase in the weight average molecular weight by 5.0% with the addition of a cross-linking agent. Rheological studies on the materials showed that the addition of a cross-linking agent increased the storage modulus and viscosity, while reducing the tan δ value. Using microcellular injection molding, cross-linked thermoplastic polyurethane could be foamed to a minimum density of 0.159 g/cc at the higher end of the processing window, as compared with a minimum density of 0.193 g/cc for pure thermoplastic polyurethane foam. Scanning electron microscope analyses of the foamed parts showed a bimodal foam structure for thermoplastic polyurethane with a cross-linking agent and a more integral foam structure with less cell coalescence even at higher density reductions.

Applications of Core Retraction in Manufacturing Low-Density Polypropylene Foams with Microcellular Injection Molding

Without modifying existing part and mold designs, the conventional microcellular injection molding (MIM) process can typically save about 5–10% material without encountering problems such as incomplete filling, excessive shrinkage, or deteriorating microstructure and mechanical properties. In this study core retraction was used in combination with the MIM process to produce thick polypropylene (PP) parts (up to 7.6 mm thick) with high density reductions of 30% and 55%. The cavity volume was modified by changing the retraction distance, which enabled control of density reductions. The lowest densities were achieved with this core retraction-aided microcellular injection molding (CR-MIM) process, the results of which could not have been achieved by the conventional MIM process alone. The effects of delay time in core retraction and weight reduction on the microstructure of the core and skin layers were investigated. It was shown that the CR-MIM process yielded better microstructure and tensile properties than the conventional MIM process. Use of core retraction also yielded more consistent densities and tensile properties throughout the length of the foamed parts.

Improved Processability and the Processing-Structure-Properties Relationship of Ultra-High Molecular Weight Polyethylene via Supercritical Nitrogen and Carbon Dioxide in Injection Molding

The processability of injection molding ultra-high molecular weight polyethylene (UHMWPE) was improved by introducing supercritical nitrogen (scN2) or supercritical carbon dioxide (scCO2) into the polymer melt, which decreased its viscosity and injection pressure while reducing the risk of degradation. When using the special full-shot option of microcellular injection molding (MIM), it was found that the required injection pressure decreased by up to 30% and 35% when scCO2 and scN2 were used, respectively. The mechanical properties in terms of tensile strength, Young’s modulus, and elongation-at-break of the supercritical fluid (SCF)-loaded samples were examined. The thermal and rheological properties of regular and SCF-loaded samples were analyzed using differential scanning calorimetry (DSC) and parallel-plate rheometry, respectively. The results showed that the temperature dependence of UHMWPE was very low, suggesting that increasing the processing temperature is not a viable method for reducing injection pressure or improving processability. Moreover, the use of scN2 and scCO2 with UHMWPE and MIM retained the high molecular weight, and thus the mechanical properties, of the polymer, while regular injection molding led to signs of degradation.