Thomas W. Phillips

Biorational approaches to managing stored-product insects.

Stored-product insects can cause postharvest losses, estimated from up to 9% in developed countries to 20% or more in developing countries. There is much interest in alternatives to conventional insecticides for controlling stored-product insects because of insecticide loss due to regulatory action and insect resistance, and because of increasing consumer demand for product that is free of insects and insecticide residues. Sanitation is perhaps the first line of defense for grain stored at farms or elevators and for food-processing and warehouse facilities. Some of the most promising biorational management tools for farm-stored grain are temperature management and use of natural enemies. New tools for computer-assisted decision-making and insect sampling at grain elevators appear most promising. Processing facilities and warehouses usually rely on trap captures for decision-making, a process that needs further research to optimize.

Phosphine Resistance in Tribolium castaneum and Rhyzopertha dominica From Stored Wheat in Oklahoma

ABSTRACT Phosphine gas, or hydrogen phosphide (PH3), is the most common insecticide applied to durable stored products worldwide and is routinely used in the United States for treatment of bulk-stored cereal grains and other durable stored products. Research from the late 1980s revealed low frequencies of resistance to various residual grain protectant insecticides and to phosphine in grain insect species collected in Oklahoma. The present work, which used the same previously established discriminating dose bioassays for phosphine toxicity as in the earlier study, evaluated adults of nine different populations of red flour beetle, Tribolium castaneum (Herbst), and five populations of lesser grain borer, Rhyzopertha dominica (F.) collected from different geographic locations in Oklahoma. One additional population for each species was a laboratory susceptible strain. Discriminating dose assays determined eight out of the nine T. castaneum populations, and all five populations of R. dominica, contained phosphine-resistant individuals, and highest resistance frequencies were 94 and 98%, respectively. Dose-response bioassays and logit analyses determined that LC99 values were ≈3 ppm for susceptible and 377 ppm for resistant T. castaneum, and ≈2 ppm for susceptible and 3,430 ppm for resistant R. dominica. The most resistant T. castaneum population was 119-fold more resistant than the susceptible strain and the most resistant R. dominica population was over 1,500-fold more resistant. Results suggest a substantial increase in phosphine resistance in these major stored-wheat pests in the past 21 yr, and these levels of resistance to phosphine approach those reported for other stored-grain pest species in other countries.

Residual efficacy of pyriproxyfen and hydroprene applied to wood, metal and concrete for control of stored‐product insects

BACKGROUND Pyriproxyfen and hydroprene are insect growth regulators (IGRs) that have been evaluated to control insect pests of field crops, but there are limited reports of efficacy against stored-product insects. A laboratory study was conducted to determine residual efficacy of pyriproxyfen and hydroprene on wood, metal and concrete surfaces. Pyriproxyfen was applied to the surfaces at 1.15 and 2.3 mg active ingredient [AI] m(-2), while hydroprene was applied at the label rate of 19 mg AI m(-2). Late-instar larvae of Tribolium confusum Jacqueline DuVal, T. castaneum (Herbst), Oryzaephilus surinamenis L., Lasioderma serricorne (F.) and Plodia interpunctella (Hübner) were exposed with a food source on the treated surfaces. Residual testing was conducted at 1, 28 and 56 days post-treatment. RESULTS Hydroprene was least persistent on concrete and generally most persistent on metal. Pyriproxyfen gave greater residual persistence than hydroprene, and there was no consistent difference in efficacy among the three surfaces. Efficacy varied among the five insect species, but generally P. interpunctella was the most tolerant species to both IGRs. CONCLUSIONS Pyriproxyfen gave effective residual control of primary stored-product insect species by inhibiting adult emergence of exposed larvae. Results show that pyriproxyfen can be a useful addition for pest management programs in mills, warehouses and food storage facilities.

Effectiveness of Sulfuryl Fluoride for Control of Different Life Stages of Stored-Product Psocids (Psocoptera)

ABSTRACT With the phase-out and impending ban of methyl bromide, sulfuryl fluoride is among the most promising alternative fumigant insecticides for control of stored-product insect pests. It has been evaluated for control of several stored-product insect pests, but there are few data available on its efficacy for control of stored-product psocids (Psocoptera). We evaluated sulfuryl fluoride for control of different life stages of the psocids Liposcelis paeta Pearman, L. entomophila (Enderlein), L. bostrychophila Badonnel, L. decolor Pearman, and Lepinotus reticulatus Enderlein (Trogiidae) in 48-hr trials at 27.5 °C Adults and nymphs were susceptible to sulfuryl fluoride. Complete (100%) adult and nymphal mortality was recorded at concentrations between 4 and 8 g/m3, except for L. decolor for which all adults were only killed at 24 g/m3. Eggs were tolerant to sulfuryl fluoride. Complete egg mortality was achieved at 24 and 72 g/m3 for L. reticulatus and L. decolor, respectively. Survival of L. paeta eggs was recorded even after exposure to 96 g/m3. Given that the highest United States label concentration for sulfuryl fluoride for a 48-h exposure interval is 31.25 g/m3, our study indicates that high doses and/or longer exposures are needed for complete mortality of eggs of L. decolor and L. paeta. Moreover, the present work suggests that there is considerable variation in efficacy of sulfuryl fluoride for control of different psocid species.

Diagnostic Molecular Markers for Phosphine Resistance in U.S. Populations of Tribolium castaneum and Rhyzopertha dominica

Stored product beetles that are resistant to the fumigant pesticide phosphine (hydrogen phosphide) gas have been reported for more than 40 years in many places worldwide. Traditionally, determination of phosphine resistance in stored product beetles is based on a discriminating dose bioassay that can take up to two weeks to evaluate. We developed a diagnostic cleaved amplified polymorphic sequence method, CAPS, to detect individuals with alleles for strong resistance to phosphine in populations of the red flour beetle, Tribolium castaneum, and the lesser grain borer, Rhyzopertha dominica, according to a single nucleotide mutation in the dihydrolipoamide dehydrogenase (DLD) gene. We initially isolated and sequenced the DLD genes from susceptible and strongly resistant populations of both species. The corresponding amino acid sequences were then deduced. A single amino acid mutation in DLD in populations of T. castaneum and R. dominica with strong resistance was identified as P45S in T. castaneum and P49S in R. dominica, both collected from northern Oklahoma, USA. PCR products containing these mutations were digested by the restriction enzymes MboI and BstNI, which revealed presence or absence, respectively of the resistant (R) allele and allowed inference of genotypes with that allele. Seven populations of T. castaneum from Kansas were subjected to discriminating dose bioassays for the weak and strong resistance phenotypes. Application of CAPS to these seven populations confirmed the R allele was in high frequency in the strongly resistant populations, and was absent or at a lower frequency in populations with weak resistance, which suggests that these populations with a low frequency of the R allele have the potential for selection of the strong resistance phenotype. CAPS markers for strong phosphine resistance will help to detect and confirm resistant beetles and can facilitate resistance management actions against a given pest population.

Dispersal of Rhyzopertha dominica (Coleoptera: Bostrichidae) in Different Habitats

ABSTRACT The lesser grain borer, Rhyzopertha dominica (F.) (Coleoptera: Bostrichidae), a serious pest of stored cereal grains, is widely distributed and has been collected in different habitats in North America, such as those from agricultural and nonagricultural settings. Our objective was to study the dispersal distances and direction of dispersal by R. dominica after external marking using fluorescent powder, releasing marked beetles, and recapturing adults using pheromone traps in distinctively different ecological habitats, wooded sites and open grasslands, for 2 consecutive yr. The recapture rate of marked beetles ranged from 6 to 26% in both sites and was generally higher in the wooded site than the open field site for both years. There was a significant difference in dispersal distances between wooded and open sites. Mean dispersal distances in the wooded site ranged from 337 to 375 m, whereas in the open site, they varied from 261 to 333 m. Trap captures for both marked and feral beetles were related to the ambient temperature such that increase in trap captures occurred with increasing temperature. Significant differences were observed for directional movement of R. dominica in both sites and indicated that most beetles dispersed in the northwest direction. Correlation analyses showed that the relationship between numbers of marked-released-recaptured beetles significantly decreased with increasing trap distances. Understanding dispersal distances and directions provide insight to flight behavior of R. dominica and to the relationship between ecologically diverse breeding habitats. Knowledge of R. dominica habitat ecology outside of grain storage facilities may be useful in designing suitable management tactics to minimize the onset of infestations in grain storages.

Suitability of Different Lepidopteran Host Species for Development of Bracon hebetor (Hymenoptera: Braconidae)

ABSTRACT Bracon hebetor Say (Hymenoptera: Braconidae) is a gregarious larval ectoparasitoid of several species of Lepidoptera that are associated with stored products. The suitability of 12 potential lepidopteran host species representing four families was studied in this study for the development and reproduction of B. hebetor. The Lepidoptera species used were the Indianmeal moth, Phdia interpunctella (Hübner), Mediterranean flour moth, Ephestia kuehniella (Zeller), almond moth, E. cautella (Walker), rice moth, Corcyra cephalonica (Walker), navel orangeworm, Amyelois transitella (Stainton), greater wax moth (laboratory reared and commercial), Galleria mellonella (Linnaeus) (all Pyralidae); tobacco budworm, Heliothis virescens (Fabricus), corn earworm, Helicoverpa zea (Boddie), beet armyworm, Spodoptera exigua (Hübner) (all Noctuidae); webbing clothes moth, Tineola bisselliella (Hummel) (Tineidae); and Angoumois grain moth, Sitotroga cerealella (Olivier) (Gelichiidae). Experiments were conducted using petri dishes (100 by 15 mm) as experimental arenas at 29 ± 1°C, 65 ± 5% RH, and a photoperiod of 14:10 (L: D) h. B. hebetor females were introduced singly into arenas and given a full-grown host larva every day for 5 consecutive d. Paralysis of the host larvae and oviposition by B. hebetor females were significantly affected by host species. The cumulative fecundity in the 5-d period was highest on A. transitella (106.42 ± 5.19) and lowest on T. bisselliella (9.64 ± 1.28). The egg-to-adult survivorship and progeny sex ratio were also significantly affected by the host species. The highest percentage of parasitoid survival to the adult stage was on A. transitella (84.07 ± 2.26) and zero on T. bisselliella. Egg to adult development time was shortest on E. cautella (9.75 ± 0.25 d) and longest on G. mellonella (12.63 ± 0.28 d). Results from these studies suggest that B. hebetor females can use a wide range of lepidopteran hosts for paralysis and oviposition. However, B. hebetor cannot necessarily develop and reproduce on all host species that it can paralyze and oviposit on, and optimum reproduction is with the stored-product pyralid hosts.

A Binomial and Species-Independent Approach to Trap Capture Analysis of Flying Insects

Abstract Traps for monitoring of flying insect pests constitute a critical part of integrated pest management strategies. However, interpretation of trap captures is hampered by 1) factors associated with the performance of traps (i.e., lure, trap design, placement); 2) an often poorly defined relationship between trap captures and population density; and 3) interpretation approaches being highly specific to a certain insect species, trapping method, or trapping environment. The main purpose of this study was to identify a trap capture interpretation approach with little sensitivity to characteristics specific to a given data set, which would allow easier comparison of trapping data sets and make it easier to standardize sampling plans across insect pests and trapping environments. Based on fits of trapping data sets to standard distributions (normal, Poisson, and negative binomial), evaluations of the index of aggregation, k, and linear regression coefficients from Taylor’s power law, we concluded that these characteristics varied considerably among data sets, which means that enumerative sampling plans may not be appropriate. Across 13 trapping data sets of six insect species, we showed a consistent nonlinear relationship between average trap captures and number of traps with zero captures and that the k can be stabilized by converting trapping data into binomial data. A trap interpretation approach based on number of zero captures is both easy to use, was found to be species-independent, and means that it may be possible to establish meaningful and reliable action thresholds based on trap captures of flying insects. Although developed using trapping data from food facilities, this approach may have application to trapping data from other environments as well.

Resistance of Lasioderma serricorne (Coleoptera: Anobiidae) to Fumigation with Phosphine

ABSTRACT Lasioderma serricorne (F.) is a serious pest of stored products that is known to be resistant to the fumigant pesticide gas phosphine. This study investigated resistance in populations from the southeastern United States, and determined if a recommended treatment schedule could kill resistant insects. A laboratory assay for adult insects was developed that used a discriminating concentration of 50 ppm phosphine applied to insects for 20 h at 25°C followed by 7 d of recovery in air. Survivors were classified as resistant. L. serricorne from six different field populations associated with stored tobacco were surveyed with the assay and all had resistant individuals. Four populations had greater than 90% of their insects resistant. Two industry-recommended treatment schedules were evaluated in laboratory fumigations against mixed life stage cultures of the four most resistant populations: the first at 200 ppm for 4 d at 25°C for controlling phosphine-susceptible L. serricorne and the second at 600 ppm for 6 d at 25°C intended to control phosphine-resistant beetles. The four populations with the highest frequency of resistant individuals from the field sampling study were not controlled by the “normal” treatment intended for susceptible insects. The higher concentration treatment greatly reduced beetle progeny from mixedstage colony jars, but there were substantial numbers of surviving adults from all four highly resistant populations that represented unacceptable levels of control.

Effects of phosphine and methyl bromide fumigation on the volatile flavor profile and sensory quality of dry cured ham

In separate experiments, randomized complete block designs with three replications were utilized to evaluate the effects of phosphine (PH(3)) (0, 200 and 1000ppm for 48h) and methyl bromide (MB) (0, 4, 8, 16, and 32mg/L for 48h) fumigation concentration on the volatile flavor compound concentrations in dry cured ham. Minimal differences existed (P>0.05) in the presence and concentration of aroma active compounds in both PH(3) and MB fumigated hams but sulfur and oxidation compounds were more prevalent (P<0.05) in the fumigated treatments when compared to the control. As phosphine fumigation concentration increased, the residual concentration of phosphine also increased in the hams (P<0.05), but all samples contained levels that are lower than the legal limit of phosphine allowed in stored food products (0.01ppm) in the United States. A triangle test (n=56) indicated that consumers could not discriminate (P>0.75) between the control hams and those that were fumigated with PH(3). Minimal aroma/flavor differences existed among MB, PH3 and control hams, and dry cured ham that was fumigated with PH(3) was safe for consumption based on residual phosphine concentrations in the meat tissue.