Timo Betz

External forces control mitotic spindle positioning

The response of cells to forces is essential for tissue morphogenesis and homeostasis. This response has been extensively investigated in interphase cells, but it remains unclear how forces affect dividing cells. We used a combination of micro-manipulation tools on human dividing cells to address the role of physical parameters of the micro-environment in controlling the cell division axis, a key element of tissue morphogenesis. We found that forces applied on the cell body direct spindle orientation during mitosis. We further show that external constraints induce a polarization of dynamic subcortical actin structures that correlate with spindle movements. We propose that cells divide according to cues provided by their mechanical micro-environment, aligning daughter cells with the external force field.

Guiding neuronal growth with light

Control over neuronal growth is a fundamental objective in neuroscience, cell biology, developmental biology, biophysics, and biomedicine and is particularly important for the formation of neural circuits in vitro, as well as nerve regeneration in vivo [Zeck, G. & Fromherz, P. (2001) Proc. Natl. Acad. Sci. USA 98, 10457–10462]. We have shown experimentally that we can use weak optical forces to guide the direction taken by the leading edge, or growth cone, of a nerve cell. In actively extending growth cones, a laser spot is placed in front of a specific area of the nerves leading edge, enhancing growth into the beam focus and resulting in guided neuronal turns as well as enhanced growth. The power of our laser is chosen so that the resulting gradient forces are sufficiently powerful to bias the actin polymerization-driven lamellipodia extension, but too weak to hold and move the growth cone. We are therefore using light to control a natural biological process, in sharp contrast to the established technique of optical tweezers [Ashkin, A. (1970) Phys. Rev. Lett. 24, 156–159; Ashkin, A. & Dziedzic, J. M. (1987) Science 235, 1517–1520], which uses large optical forces to manipulate entire structures. Our results therefore open an avenue to controlling neuronal growth in vitro and in vivo with a simple, noncontact technique.

ATP-dependent mechanics of red blood cells

Red blood cells are amazingly deformable structures able to recover their initial shape even after large deformations as when passing through tight blood capillaries. The reason for this exceptional property is found in the composition of the membrane and the membrane-cytoskeleton interaction. We investigate the mechanics and the dynamics of RBCs by a unique noninvasive technique, using weak optical tweezers to measure membrane fluctuation amplitudes with μs temporal and sub nm spatial resolution. This enhanced edge detection method allows to span over >4 orders of magnitude in frequency. Hence, we can simultaneously measure red blood cell membrane mechanical properties such as bending modulus κ = 2.8 ± 0.3 × 10−19J = 67.6 ± 7.2 kBT, tension σ = 6.5 ± 2.1 × 10−7N/m, and an effective viscosity ηeff = 81 ± 3.7 × 10−3 Pa s that suggests unknown dissipative processes. We furthermore show that cell mechanics highly depends on the membrane-spectrin interaction mediated by the phosphorylation of the interconnection protein 4.1R. Inhibition and activation of this phosphorylation significantly affects tension and effective viscosity. Our results show that on short time scales (slower than 100 ms) the membrane fluctuates as in thermodynamic equilibrium. At time scales longer than 100 ms, the equilibrium description breaks down and fluctuation amplitudes are higher by 40% than predicted by the membrane equilibrium theory. Possible explanations for this discrepancy are influences of the spectrin that is not included in the membrane theory or nonequilibrium fluctuations that can be accounted for by defining a nonthermal effective energy of up to Eeff = 1.4 ± 0.1 kBT, that corresponds to an actively increased effective temperature.

ESCRT-III Assembly and Cytokinetic Abscission Are Induced by Tension Release in the Intercellular Bridge

Making the Final Cut Abscission, the final separation of two daughter cells, was long thought to be an unimportant step in cytokinesis, triggered merely by the cells pulling strongly enough on the bridge to rupture it. Research over the past 10 years, however, has challenged this notion. Defects in cutting the cytokinetic bridge can lead to the formation of large networks of connected cells or to binucleate cells. Lafaurie-Janvore et al. (p. 1625) now show that the forces postmitotic cells exert on the cytokinetic bridge play an important role in abscission: Surprisingly, increasing the tension in the bridge inhibits abscission, while reducing tension induces abscission. This could provide a sensing mechanism to ensure that daughter cells establish sound connections with their surrounding cells and matrix before detaching from one another. When a daughter cell lets go, the mother cell cuts it loose. The last step of cell division, cytokinesis, produces two daughter cells that remain connected by an intercellular bridge. This state often represents the longest stage of the division process. Severing the bridge (abscission) requires a well-described series of molecular events, but the trigger for abscission remains unknown. We found that pulling forces exerted by daughter cells on the intercellular bridge appear to regulate abscission. Counterintuitively, these forces prolonged connection, whereas a release of tension induced abscission. Tension release triggered the assembly of ESCRT-III (endosomal sorting complex required for transport–III), which was followed by membrane fission. This mechanism may allow daughter cells to remain connected until they have settled in their final locations, a process potentially important for tissue organization and morphogenesis.

Neurite Branch Retraction Is Caused by a Threshold-Dependent Mechanical Impact

Recent results indicate that, in addition to chemical cues, mechanical stimuli may also impact neuronal growth. For instance, unlike most other cell types, neurons prefer soft substrates. However, the mechanisms responsible for the neuronal affinity for soft substrates have not yet been identified. In this study, we show that, in vitro, neurons continuously probe their mechanical environment. Growth cones visibly deform substrates with a compliance commensurate with their own. To understand the sensing of stiff substrates by growth cones, we investigated their precise temporal response to well-defined mechanical stress. When the applied stress exceeded a threshold of 274 +/- 41 pN/microm(2), neurons retracted and re-extended their processes, thereby enabling exploration of alternative directions. A calcium influx through stretch-activated ion channels and the detachment of adhesion sites were prerequisites for this retraction. Our data illustrate how growing neurons may detect and avoid stiff substrates--as a mechanism involved in axonal branch pruning--and provide what we believe is novel support of the idea that mechanics may act as guidance cue for neuronal growth.

Growth cones as soft and weak force generators

Many biochemical processes in the growth cone finally target its biomechanical properties, such as stiffness and force generation, and thus permit and control growth cone movement. Despite the immense progress in our understanding of biochemical processes regulating neuronal growth, growth cone biomechanics remains poorly understood. Here, we combine different experimental approaches to measure the structural and mechanical properties of a growth cone and to simultaneously determine its actin dynamics and traction force generation. Using fundamental physical relations, we exploited these measurements to determine the internal forces generated by the actin cytoskeleton in the lamellipodium. We found that, at timescales longer than the viscoelastic relaxation time of τ = 8.5 ± 0.5 sec, growth cones show liquid-like characteristics, whereas at shorter time scales they behaved elastically with a surprisingly low elastic modulus of E = 106 ± 21 Pa. Considering the growth cone’s mechanical properties and retrograde actin flow, we determined the internal stress to be on the order of 30 pN per μm2. Traction force measurements confirmed these values. Hence, our results indicate that growth cones are particularly soft and weak structures that may be very sensitive to the mechanical properties of their environment.

Active diffusion positions the nucleus in mouse oocytes

In somatic cells, the position of the cell centroid is dictated by the centrosome. The centrosome is instrumental in nucleus positioning, the two structures being physically connected. Mouse oocytes have no centrosomes, yet harbour centrally located nuclei. We demonstrate how oocytes define their geometric centre in the absence of centrosomes. Using live imaging of oocytes, knockout for the formin 2 actin nucleator, with off-centred nuclei, together with optical trapping and modelling, we discover an unprecedented mode of nucleus positioning. We document how active diffusion of actin-coated vesicles, driven by myosin Vb, generates a pressure gradient and a propulsion force sufficient to move the oocyte nucleus. It promotes fluidization of the cytoplasm, contributing to nucleus directional movement towards the centre. Our results highlight the potential of active diffusion, a prominent source of intracellular transport, able to move large organelles such as nuclei, providing in vivo evidence of its biological function.

Inter-Cellular Forces Orchestrate Contact Inhibition of Locomotion

Summary Contact inhibition of locomotion (CIL) is a multifaceted process that causes many cell types to repel each other upon collision. During development, this seemingly uncoordinated reaction is a critical driver of cellular dispersion within embryonic tissues. Here, we show that Drosophila hemocytes require a precisely orchestrated CIL response for their developmental dispersal. Hemocyte collision and subsequent repulsion involves a stereotyped sequence of kinematic stages that are modulated by global changes in cytoskeletal dynamics. Tracking actin retrograde flow within hemocytes in vivo reveals synchronous reorganization of colliding actin networks through engagement of an inter-cellular adhesion. This inter-cellular actin-clutch leads to a subsequent build-up in lamellar tension, triggering the development of a transient stress fiber, which orchestrates cellular repulsion. Our findings reveal that the physical coupling of the flowing actin networks during CIL acts as a mechanotransducer, allowing cells to haptically sense each other and coordinate their behaviors.

Membrane-Wrapping Contributions to Malaria Parasite Invasion of the Human Erythrocyte

The blood stage malaria parasite, the merozoite, has a small window of opportunity during which it must successfully target and invade a human erythrocyte. The process of invasion is nonetheless remarkably rapid. To date, mechanistic models of invasion have focused predominantly on the parasite actomyosin motor contribution to the energetics of entry. Here, we have conducted a numerical analysis using dimensions for an archetypal merozoite to predict the respective contributions of the host-parasite interactions to invasion, in particular the role of membrane wrapping. Our theoretical modeling demonstrates that erythrocyte membrane wrapping alone, as a function of merozoite adhesive and shape properties, is sufficient to entirely account for the first key step of the invasion process, that of merozoite reorientation to its apex and tight adhesive linkage between the two cells. Next, parasite-induced reorganization of the erythrocyte cytoskeleton and release of parasite-derived membrane can also account for a considerable energetic portion of actual invasion itself, through membrane wrapping. Thus, contrary to the prevailing dogma, wrapping by the erythrocyte combined with parasite-derived membrane release can markedly reduce the expected contributions of the merozoite actomyosin motor to invasion. We therefore propose that invasion is a balance between parasite and host cell contributions, evolved toward maximal efficient use of biophysical forces between the two cells.

Actin polymerization or myosin contraction: two ways to build up cortical tension for symmetry breaking

Cells use complex biochemical pathways to drive shape changes for polarization and movement. One of these pathways is the self-assembly of actin filaments and myosin motors that together produce the forces and tensions that drive cell shape changes. Whereas the role of actin and myosin motors in cell polarization is clear, the exact mechanism of how the cortex, a thin shell of actin that is underneath the plasma membrane, can drive cell shape changes is still an open question. Here, we address this issue using biomimetic systems: the actin cortex is reconstituted on liposome membranes, in an ‘outside geometry’. The actin shell is either grown from an activator of actin polymerization immobilized at the membrane by a biotin–streptavidin link, or built by simple adsorption of biotinylated actin filaments to the membrane, in the presence or absence of myosin motors. We show that tension in the actin network can be induced either by active actin polymerization on the membrane via the Arp2/3 complex or by myosin II filament pulling activity. Symmetry breaking and spontaneous polarization occur above a critical tension that opens up a crack in the actin shell. We show that this critical tension is reached by growing branched networks, nucleated by the Arp2/3 complex, in a concentration window of capping protein that limits actin filament growth and by a sufficient number of motors that pull on actin filaments. Our study provides the groundwork to understanding the physical mechanisms at work during polarization prior to cell shape modifications.