Tobias A. F. König

Electrically tunable plasmonic behavior of nanocube-polymer nanomaterials induced by a redox-active electrochromic polymer.

We present a plasmon-active hybrid nanomaterial design with electrochemical tunability of the localized surface plasmon resonances. The plasmonic-active nanostructures are composed of silver nanocube aggregates embedded into an electrochromic polymer coating on an indium tin oxide electrode with the nanocube aggregation controlled by the surface pressure. Such polymer-nanocube hybrid nanomaterials demonstrated unique tunable plasmonic behavior under an applied electrochemical potential. A significant reversible experimental peak shift of 22 nm at an electrical potential of 200 mV has been achieved in these measurements. Finite-difference time-domain (FDTD) simulations show that, under full oxidation potential, a maximal spectral shift of ca. 80 nm can be potentially achieved, which corresponds to a high sensitivity of 178 nm per refractive index unit. Furthermore, FDTD modeling suggests that the electrochemically controlled tunability of plasmonic peaks is caused by reversible changes in the refractive index of the electrochromic polymer coating caused by oxidation or reduction reactions under external electrical potential. Consequently, we define the orthogonal plasmonic resonance shift as a shift that is orthogonal to the redox process responsible for the refractive index change. On the basis of these results, we suggest that the combination of anisotropic nanostructures and electrochromic matrix has the potential to reversibly electrically tune plasmonic resonances over the full visible spectrum.

Strongly Coupled Plasmonic Modes on Macroscopic Areas via Template-Assisted Colloidal Self-Assembly

We present ensembles of surface-ordered nanoparticle arrangements, which are formed by template-assisted self-assembly of monodisperse, protein-coated gold nanoparticles in wrinkle templates. Centimeter-squared areas of highly regular, linear assemblies with tunable line width are fabricated and their extinction cross sections can be characterized by conventional UV/vis/NIR spectroscopy. Modeling based on electrodynamic simulations shows a clear signature of strong plasmonic coupling with an interparticle spacing of 1–2 nm. We find evidence for well-defined plasmonic modes of quasi-infinite chains, such as resonance splitting and multiple radiant modes. Beyond elementary simulations on the individual chain level, we introduce an advanced model, which considers the chain length distribution as well as disorder. The step toward macroscopic sample areas not only opens perspectives for a range of applications in sensing, plasmonic light harvesting, surface enhanced spectroscopy, and information technology but also eases the investigation of hybridization and metamaterial effects fundamentally.

Plasmonic Library Based on Substrate-Supported Gradiential Plasmonic Arrays

We present a versatile approach to produce macroscopic, substrate-supported arrays of plasmonic nanoparticles with well-defined interparticle spacing and a continuous particle size gradient. The arrays thus present a “plasmonic library” of locally noncoupling plasmonic particles of different sizes, which can serve as a platform for future combinatorial screening of size effects. The structures were prepared by substrate assembly of gold-core/poly(N-isopropylacrylamide)-shell particles and subsequent post-modification. Coupling of the localized surface plasmon resonance (LSPR) could be avoided since the polymer shell separates the encapsulated gold cores. To produce a particle array with a broad range of well-defined but laterally distinguishable particle sizes, the substrate was dip-coated in a growth solution, which resulted in an overgrowth of the gold cores controlled by the local exposure time. The kinetics was quantitatively analyzed and found to be diffusion rate controlled, allowing for precise tuning of particle size by adjusting the withdrawal speed. We determined the kinetics of the overgrowth process, investigated the LSPRs along the gradient by UV–vis extinction spectroscopy, and compared the spectroscopic results to the predictions from Mie theory, indicating the absence of local interparticle coupling. We finally discuss potential applications of these substrate-supported plasmonic particle libraries and perspectives toward extending the concept from size to composition variation and screening of plasmonic coupling effects.

Surface Assembly and Plasmonic Properties in Strongly Coupled Segmented Gold Nanorods

An assembly strategy is reported such that segmented nanorods fabricated through template-assisted methods can be robustly transferred and tethered to a pre-functionalized substrate with excellent uniformity over large surface areas. After embedding the rods, sacrificial nickel segments were selectively etched leaving behind strongly coupled segmented gold nanorods with gaps between rods below 40 nm and as small as 2 nm. Hyper-spectral imaging is utilized to measure Rayleigh scattering spectra from individual and coupled nanorod elements in contrast to common bulk measurements. This approach discerns the effects of not only changing segment and gap size but also the presence of characteristic defects on the plasmonic coupling between closely spaced nanorods. Polarized hyper-spectral measurements are conducted to provide direct observation of the anisotropic plasmonic resonance modes in individual and coupled nanorods, which are close to those predicted by computer simulations for nanorods with ideal shapes. Some common deviations from ideal shape such as non-flat facets and asymmetric tails are demonstrated to result in the appearance of characteristic plasmon resonances, which have not been considered before. The large-scale assembly of coupled noble nanostructures with fine control over geometry and high uniformity provides means to strongly tune the scattering, absorption, and near-field plasmonic properties through the geometric arrangement of precisely controlled nanorod segments.

Reversible structuring of photosensitive polymer films by surface plasmon near field radiation

We report on the fabrication and characterisation of a novel type of hybrid azo-modified photosensitive polymer film with a nanoscale metallic structuring integrated into the substrate. The metal structures permit to generate surface plasmon near fields when irradiated by UV-light from the rear without directly illuminating the polymer. This allows establishment of a localized, complex-shape intensity distribution at sub-wavelength resolution with a corresponding impact on the photosensitive polymer. The possibilities of exploiting this setup are manifold. We find that just by using the change of polarization of the incident light as means of control, the topography can be driven to change between various patterns reversibly. These results are confirmed by numerical simulations and compared with in situ recorded topography changes.

Silver-Overgrowth-Induced Changes in Intrinsic Optical Properties of Gold Nanorods: From Noninvasive Monitoring of Growth Kinetics to Tailoring Internal Mirror Charges

We investigate the effect of surfactant-mediated, asymmetric silver overgrowth of gold nanorods on their intrinsic optical properties. From concentration-dependent experiments, we established a close correlation of the extinction in the UV/vis/NIR frequency range and the morphological transition from gold nanorods to Au@Ag cuboids. Based on this correlation, a generic methodology for in situ monitoring of the evolution of the cuboid morphology was developed and applied in time-dependent experiments. We find that growth rates are sensitive to the substitution of the surfactant headgroup by comparison of benzylhexadecyldimethylammonium chloride (BDAC) with hexadecyltrimethylammonium chloride (CTAC). The time-dependent overgrowth in BDAC proceeds about 1 order of magnitude slower than in CTAC, which allows for higher control during silver overgrowth. Furthermore, silver overgrowth results in a qualitatively novel optical feature: Upon excitation inside the overlap region of the interband transition of gold and intraband of silver, the gold core acts as a retarding element. The much higher damping of the gold core compared to the silver shell in Au@Ag cuboids induces mirror charges at the core/shell interface as shown by electromagnetic simulations. Full control over the kinetic growth process consequently allows for precise tailoring of the resonance wavelengths of both modes. Tailored and asymmetric silver-overgrown gold nanorods are of particular interest for large-scale fabrication of nanoparticles with intrinsic metamaterial properties. These building blocks could furthermore find application in optical sensor technology, light harvesting, and information technology.

Plasmonic nanomeshes : their ambivalent role as transparent electrodes in organic solar cells

In this contribution, the optical losses and gains attributed to periodic nanohole array electrodes in polymer solar cells are systematically studied. For this, thin gold nanomeshes with hexagonally ordered holes and periodicities (P) ranging from 202 nm to 2560 nm are prepared by colloidal lithography. In combination with two different active layer materials (P3HT:PC61BM and PTB7:PC71BM), the optical properties are correlated with the power conversion efficiency (PCE) of the solar cells. A cavity mode is identified at the absorption edge of the active layer material. The resonance wavelength of this cavity mode is hardly defined by the nanomesh periodicity but rather by the absorption of the photoactive layer. This constitutes a fundamental dilemma when using nanomeshes as ITO replacement. The highest plasmonic enhancement requires small periodicities. This is accompanied by an overall low transmittance and high parasitic absorption losses. Consequently, larger periodicities with a less efficient cavity mode, yet lower absorptive losses were found to yield the highest PCE. Nevertheless, ITO-free solar cells reaching ~77% PCE compared to ITO reference devices are fabricated. Concomitantly, the benefits and drawbacks of this transparent nanomesh electrode are identified, which is of high relevance for future ITO replacement strategies.

Near-Field Induced Reversible Structuring of Photosensitive Polymer Films: Gold Versus Silver Nano-antennas

We report on reversible structuring of photosensitive azo-containing polymer films induced by near-field intensity patterns emanating from illuminated nano-scale metal structures fabricated by colloidal lithography. Two different sets of these nano-antennas, consisting of either gold or silver, were investigated with respect to their ability to induce topography changes in a photosensitive polymer film placed above. Using in situ recorded atomic force microscopy micrographs of polymer topography changes during UV irradiation, we find that the response of the polymer film differs for the two metals at similar geometries of the metal nanostructures. The maximum topography change is stronger for Ag antennas as compared to the Au pattern, whereas the latter material revealed a pronounced splitting of topography maxima into two, a phenomenon less visible in the case of Ag. Finite difference time domain simulations of the electromagnetic field distribution in the vicinity of the metal structures confirm this remarkable observation. The local intensity is twice as large for the Ag as compared to the Au structures, and in each case, a splitting of the intensity pattern results, with a stronger modulation for Au. For both metals, the topography change was found to be reversible between a patterned and a flat by repeated change of irradiation conditions.

Surface plasmon nanolithography: impact of dynamically varying near-field boundary conditions at the air–polymer interface

It is well-known that surface plasmon generated near fields of suitably irradiated metal nano-structures can induce a patterning in an azobenzene-modified photosensitive polymer film placed on top. The change in the topography usually follows closely and permanently the underlying near field intensity pattern. With this approach, one can achieve a multitude of morphologies by additionally changing light intensity, polarization and the kind of metal used for nano-structuring. In this paper, we demonstrate that below a critical value of the polymer film thickness, the receding polymer material induces a change in refractive index of the glass–metal–polymer system, modifying the near field intensity distribution and causing a back-reaction on the flow of polymer material. This has a profound influence on the smallest size of topographical features that can be imprinted into the polymer.

Controlled topography change of subdiffraction structures based on photosensitive polymer films induced by surface plasmon polaritons.

We discuss the controlled subdiffraction modulations of photosensitive polymer films that are induced by surface plasmon interference in striking contrast to well-known conventional microscopic gratings. The near-field light intensity patterns were generated at the nanoslits fabricated in a silver layer with the photosensitive polymer film placed above. We observed that the topographical modulations can be excited only when the polarization is perpendicular to the nanoslits. Moreover, we have shown that light with certain wavelengths resulted in a characteristic topographical pattern with the periodicity three times smaller than the wavelength of incoming light. A combination of experimental observations with simulations showed that the unique subdiffraction topographical patterns are caused by constructive interference between two counter-propagating surface plasmon waves generated at neighboring nanoslits in the metal layer beneath the photosensitive polymer film. The light intensity distribution was simulated to demonstrate strong dependency upon the slit array periodicity as well as wavelength and polarization of incoming light.