Tobias Günther

Identification of multiple putative S-layer genes partly expressed by Lysinibacillus sphaericus JG-B53.

Lysinibacillus sphaericus JG-B53 was isolated from the uranium mining waste pile Haberland near Johanngeorgenstadt, Germany. Previous studies have shown that many bacteria that have been isolated from these heavy metal contaminated environments possess surface layer (S-layer) proteins that enable the bacteria to survive by binding metals with high affinity. Conversely, essential trace elements are able to cross the filter layer and reach the interior of the cell. This is especially true of the S-layer of L. sphaericus JG-B53, which possesses outstanding recrystallization and metal-binding properties. In this study, S-layer protein gene sequences encoded in the genome of L. sphaericus JG-B53 were identified using next-generation sequencing technology followed by bioinformatic analyses. The genome of L. sphaericus JG-B53 encodes at least eight putative S-layer protein genes with distinct differences. Using mRNA analysis the expression of the putative S-layer protein genes was studied. The functional S-layer protein B53 Slp1 was identified as the dominantly expressed S-layer protein in L. sphaericus JG-B53 by mRNA studies, SDS-PAGE and N-terminal sequencing. B53 Slp1 is characterized by square lattice symmetry and a molecular mass of 116 kDa. The S-layer protein B53 Slp1 shows a high similarity to the functional S-layer protein of L. sphaericus JG-A12, which was isolated from the same uranium mining waste pile Haberland and has been described by previous research. These similarities indicate horizontal gene transfer and DNA rearrangements between these bacteria. The presence of multiple S-layer gene copies may enable the bacterial strains to quickly adapt to changing environments.

Constitutive expression of hydrophobin HFB1 from Trichoderma reesei in Pichia pastoris and its pre-purification by foam separation during cultivation

Hydrophobins are small surface‐active proteins that have considerable potential for use in applications ranging from medical and technical coatings, separation technologies, biosensors, and personal care. Their wider use would be facilitated by the availability of recombinant tailor‐made hydrophobins. We successfully expressed the class II hydrophobin HFB1 from Trichoderma reesei in Pichia pastoris under the control of the constitutive GAP (glyceraldehyde 3‐phosphate dehydrogenase) promoter. Avoiding the use of the AOX1 (alcohol oxidase 1) promoter prevents the costs and risks associated with the storage and delivery of methanol used as an inducer. Efficient secretion of hydrophobin was achieved using either the alpha‐factor prepro‐peptide or the native secretion signal of HFB1. The secreted hydrophobins have been isolated with a purity of up to 70% using in situ foam separation during the cultivation process. Coating experiments and surface pressure measurements demonstrated the activity of the hydrophobins. An immunodot assay showed the accessibility of carboxyterminally fused tags of the hydrophobin, which is necessary for potential applications using functionalized hydrophobins. The presented data show that Pichia pastoris is a suitable system for production of constitutively expressed and secreted active hydrophobin, allowing for in situ pre‐purification using foam separation.

Investigation of metal sorption behavior of Slp1 from Lysinibacillus sphaericus JG-B53: a combined study using QCM-D, ICP-MS and AFM

Surface layer proteins (S-layer) of Lysinibacillus sphaericus JG-B53 are biological compounds with several bio-based technical applications such as biosorptive materials for metal removal or rare metals recovery from the environment. Despite their well-described applications, a deeper understanding of their metal sorption behavior still remains challenging. The metal sorption ability of Au3+, Pd2+, Pt2+ and Eu3+ was investigated by ICP-MS, AFM and QCM-D which enables the sorption detection in real-time during in situ experiments. Results indicate a high binding of Pd, followed by Au, Eu and Pt to the proteins. The comparison between different methods allowed a deeper understanding of the metal sorption of isolated S-layer either frees in liquid, adsorbed forming a protein layer or as the bacteria surface.

E. coli filament formation induced by heterologous S-layer expression

Escherichia coli is a rod-shaped intestinal bacterium which has a size of 1.1-1.5 µm x 2.0-6.0 µm. The fast cell division process and the uncomplicated living conditions have turned E. coli into a widely used host in genetic engineering and into one of the best studied microorganisms of all. We used E. coli BL21(DE3) as host for heterologous expression of S-layer proteins of Lysinibacillus sphaericus JG-A12 in order to enable a fast and high efficient protein production. The S-layer expression induced in E. coli an unusual elongation of the cells, thus producing filaments of >100 µm in length. In the stationary growth phase, E. coli filaments develop tube-like structures that contain E. coli single cells. Fluorescence microscopic analyses of S-layer expressing E. coli cells that were stained with membrane stain FM® 5-95 verify the membrane origin of the tubes. Analyses of DAPI stained GFP-S-layer expressing E. coli support the assumption of a disordered cell division that is induced by the huge amount of recombinant S-layer proteins. However, the underlying mechanism is still not characterized in detail. These results describe the occurrence of a novel stable cell form of E. coli as a result of a disordered cell division process.

Heterologous expression of the surface-layer-like protein SllB induces the formation of long filaments of Escherichia coli consisting of protein-stabilized outer membrane

Escherichia coli is one of the best studied micro-organisms and is the most widely used host in genetic engineering. The Gram-negative single cells are rod-shaped, and filaments are usually not found. Here, we describe the reproducible formation of elongated E. coli cells. During heterologous expression of the silent surface (S)-layer protein gene sllB from Lysinibacillus sphaericus JG-A12 in E. coli BL21(DE3), the cells were arranged as long chains which were surrounded by highly stable sheaths. These filaments had a length of >100u2005μm. In the stationary growth phase, microscopic analyses demonstrated the formation of unusually long transparent tube-like structures which were enclosing separate single cells. The tube-like structures were isolated and analysed by SDS-PAGE, infrared-spectroscopy and different microscopic methods in order to identify their unusual composition and structure. The tube-like structures were found to be like outer membranes, containing high levels of proteins and to which the recombinant S-layer proteins were attached. Despite the entire structure being indicative of a disordered cell division, the bacterial cells were highly viable and stable. To our knowledge, this is the first time that the induction of drastic morphological changes in E. coli by the expression of a foreign protein has been reported.

Immobilization of microorganisms for AFM studies in liquids

In this paper a new sample preparation method is described that allows for the in vivo AFM imaging of a wide range of different microorganisms. The primary focus of this work was the immobilization of fixed and living cells of various microorganisms on substrates. The tested organisms of interest were Gram-negative and Gram-positive bacteria, yeast, and algae. The immobilization of the biological samples on a sample holder is crucial for AFM. Lateral forces of the probe tip can alter or remove sample material during scanning. This effect occurs especially on soft biological samples, which causes artifacts within the imaging and leads to a loss in quality and structural information. For the immobilization organisms were deposited on polyelectrolyte coated surfaces by centrifugation. Microorganisms were imaged without the use of any drying steps including either living or with glutaraldehyde fixation. Glutaraldehyde fixation enables long time scans that cover wide areas or the investigation of organisms in special growth stages, such as cell division or budding. Skipping fixation steps allows in vivo imaging to investigate living organisms and cellular processes under physiological conditions. A method for the reliable and efficient immobilization of microorganisms has been demonstrated by imaging the proteinaceous surface layer (S-layer) of living Lysinibacillus sphaericus and Viridibacilli arvi cells. In additional experiments, cell division of E. coli was successfully imaged. During repeated wide area scans, fixed sample material was not removed by the AFM tip, proving the suitability of these methods for AFM analyses. Ultimately, this method can be easily applied for the immobilization of a wide range of microorganisms and in vivo imaging of whole cells and cell ultrastructure.

Development of functionalised polyelectrolyte capsules using filamentous Escherichia coli cells

BackgroundEscherichia coli is one of the best studied microorganisms and finds multiple applications especially as tool in the heterologous production of interesting proteins of other organisms. The heterologous expression of special surface (S-) layer proteins caused the formation of extremely long E. coli cells which leave transparent tubes when they divide into single E. coli cells. Such natural structures are of high value as bio-templates for the development of bio-inorganic composites for many applications. In this study we used genetically modified filamentous Escherichia coli cells as template for the design of polyelectrolyte tubes that can be used as carrier for functional molecules or particles. Diversity of structures of biogenic materials has the potential to be used to construct inorganic or polymeric superior hybrid materials that reflect the form of the bio-template. Such bio-inspired materials are of great interest in diverse scientific fields like Biology, Chemistry and Material Science and can find application for the construction of functional materials or the bio-inspired synthesis of inorganic nanoparticles.ResultsGenetically modified filamentous E. coli cells were fixed in 2% glutaraldehyde and coated with alternating six layers of the polyanion polyelectrolyte poly(sodium-4styrenesulfonate) (PSS) and polycation polyelectrolyte poly(allylamine-hydrochloride) (PAH). Afterwards we dissolved the E. coli cells with 1.2% sodium hypochlorite, thus obtaining hollow polyelectrolyte tubes of 0.7 μm in diameter and 5–50 μm in length. For functionalisation the polyelectrolyte tubes were coated with S-layer protein polymers followed by metallisation with Pd(0) particles. These assemblies were analysed with light microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and transmission electron microscopy.ConclusionThe thus constructed new material offers possibilities for diverse applications like novel catalysts or metal nanowires for electrical devices. The novelty of this work is the use of filamentous E. coli templates and the use of S-layer proteins in a new material construct.

Synthesis of S-Layer Conjugates and Evaluation of Their Modifiability as a Tool for the Functionalization and Patterning of Technical Surfaces

Chemical functional groups of surface layer (S-layer) proteins were chemically modified in order to evaluate the potential of S-layer proteins for the introduction of functional molecules. S-layer proteins are structure proteins that self-assemble into regular arrays on surfaces. One general feature of S-layer proteins is their high amount of carboxylic and amino groups. These groups are potential targets for linking functional molecules, thus producing reactive surfaces. In this work, these groups were conjugated with the amino acid tryptophan. In another approach, SH-groups were chemically inserted in order to extend the spectrum of modifiable groups. The amount of modifiable carboxylic groups was further evaluated by potentiometric titration in order to evaluate the potential efficiency of S-layer proteins to work as matrix for bioconjugations. The results proved that S-layer proteins can work as effective matrices for the conjugation of different molecules. The advantage of using chemical modification methods over genetic methods lies in its versatile usage enabling the attachment of biomolecules, as well as fluorescent dyes and inorganic molecules. Together with their self-assembling properties, S-layer proteins are suitable as targets for bioconjugates, thus enabling a nanostructuring and bio-functionalization of surfaces, which can be used for different applications like biosensors, filter materials, or (bio)catalytic surfaces.

Characterization of Three Different Unusual S-Layer Proteins from Viridibacillus arvi JG-B58 That Exhibits Two Super-Imposed S-Layer Proteins

Genomic analyses of Viridibacillus arvi JG-B58 that was previously isolated from heavy metal contaminated environment identified three different putative surface layer (S-layer) protein genes namely slp1, slp2, and slp3. All three genes are expressed during cultivation. At least two of the V. arvi JG-B58 S-layer proteins were visualized on the surface of living cells via atomic force microscopy (AFM). These S-layer proteins form a double layer with p4 symmetry. The S-layer proteins were isolated from the cells using two different methods. Purified S-layer proteins were recrystallized on SiO2 substrates in order to study the structure of the arrays and self-assembling properties. The primary structure of all examined S-layer proteins lack some features that are typical for Bacillus or Lysinibacillus S-layers. For example, they possess no SLH domains that are usually responsible for the anchoring of the proteins to the cell wall. Further, the pI values are relatively high ranging from 7.84 to 9.25 for the matured proteins. Such features are typical for S-layer proteins of Lactobacillus species although sequence comparisons indicate a close relationship to S-layer proteins of Lysinibacillus and Bacillus strains. In comparison to the numerous descriptions of S-layers, there are only a few studies reporting the concomitant existence of two different S-layer proteins on cell surfaces. Together with the genomic data, this is the first description of a novel type of S-layer proteins showing features of Lactobacillus as well as of Bacillus-type S-layer proteins and the first study of the cell envelope of Viridibacillus arvi.

S-Layer-Based Nanocomposites for Industrial Applications

This chapter covers the fundamental aspects of bacterial S-layers: what are S-layers, what is known about them, and what are their main features that makes them so interesting for the production of nanostructures. After a detailed introduction of the paracrystalline protein lattices formed by S-layer systems in nature the chapter explores the engineering of S-layer-based materials. How can S-layers be used to produce industry-ready nanoscale bio-composite materials, and which kinds of nanomaterials are possible (e.g., nanoparticle synthesis, nanoparticle immobilization, and multifunctional coatings)? What are the advantages and disadvantages of S-layer-based composite materials? Finally, the chapter highlights the potential of these innovative bacterial biomolecules for future technologies in the fields of metal filtration, catalysis, and bio-functionalization.