Tomasz Szatkowski

Modification of Chitin with Kraft Lignin and Development of New Biosorbents for Removal of Cadmium(II) and Nickel(II) Ions

Novel, functional materials based on chitin of marine origin and lignin were prepared. The synthesized materials were subjected to physicochemical, dispersive-morphological and electrokinetic analysis. The results confirm the effectiveness of the proposed method of synthesis of functional chitin/lignin materials. Mechanism of chitin modification by lignin is based on formation of hydrogen bonds between chitin and lignin. Additionally, the chitin/lignin materials were studied from the perspective of waste water treatment. The synthetic method presented in this work shows an attractive and facile route for producing low-cost chitin/lignin biosorbents with high efficiency of nickel and cadmium adsorption (88.0% and 98.4%, respectively). The discovery of this facile method of synthesis of functional chitin/lignin materials will also have a significant impact on the problematic issue of the utilization of chitinous waste from the seafood industry, as well as lignin by-products from the pulp and paper industry.

Synthesis of nanostructured chitin–hematite composites under extreme biomimetic conditions

Chitin of poriferan origin is a unique and thermostable biological material. It also represents an example of a renewable materials source due to the high regeneration ability of Aplysina sponges under marine ranching conditions. Chitinous scaffolds isolated from the skeleton of the marine sponge Aplysina aerophoba were used as a template for the in vitro formation of Fe2O3 under conditions (pH ∼ 1.5, 90 °C) which are extreme for biological materials. Novel chitin–Fe2O3 three dimensional composites, which have been prepared for the first time using hydrothermal synthesis, were thoroughly characterized using numerous analytical methods including Raman spectroscopy, XPS, XRD, electron diffraction and HR-TEM. We demonstrate the growth of uniform Fe2O3 nanocrystals into the nanostructured chitin substrate and propose a possible mechanism of chitin–hematite interactions. Moreover, we show that composites made of sponge chitin–Fe2O3 hybrid materials with active carbon can be successfully used as electrode materials for electrochemical capacitors.

Novel nanostructured hematite–spongin composite developed using an extreme biomimetic approach

The marine sponge Hippospongia communis (Demospongiae: Porifera) is a representative of bath sponges, which possess characteristic mineral-free fibrous skeletons made of a structural protein – spongin. This fibrous skeleton is mechanically robust, resistant to acidic treatment, and thermally stable up to 160 °C. Due to these properties, we decided to use this biological material for the first time for the hydrothermal synthesis of hematite (α-Fe2O3) via catalyzed hydrolysis of FeCl3 to obtain a hematite–spongin composite. The material obtained was studied with Scanning Electron Microscopy (SEM), High-Resolution Transmission Electron Microscopy (HR-TEM), X-ray Photoemission Spectroscopy (XPS) and Raman spectroscopy. The α-Fe2O3–spongin-based composite was tested for its potential application as an anode material in a capacitor. The results indicate that components constructed using this novel composite material have a positive effect on the capacitance of energy storing devices.

Preparation and characterization of multifunctional chitin/lignin materials

Multifunctional chitin/lignin materials were synthesized. In order to combine mechanical milling of the biopolymers with simultaneous mixing, a centrifugal ball mill was utilized. The resulting materials, differing in terms of the proportions of precursors used, underwent detailed physicochemical and dispersive-morphological analysis. On the basis of FT-IR spectra and results of elemental analysis, the efficiency of the preparation of the materials was determined. The influence of the precursors on the thermal stability of the resulting systems was also evaluated. Zeta potential was determined as a function of pH to describe the electrokinetic stability of aqueous dispersions. This is important for evaluating the utility of the materials and indirectly confirms the effectiveness of the proposed method of synthesis of chitin/lignin products. Measurements were performed to determine basic colorimetric parameters, crucial in the production technology of multiple colored materials. It is expected that chitin/lignin materials will find a wide range of applications (biosorbents, polymer fillers, and electrochemical sensors), as they combine the unique properties of chitin with the specific structural features of lignin to provide a multifunctional material.

Silica/lignosulfonate hybrid materials: Preparation and characterization

The research reported here concerns the synthesis, characterization and potential applications of silica/lignosulfonate hybrid materials. Three types of silica were used (Aerosil®200, Syloid®244 and hydrated silica), along with magnesium lignosulfonate. The effectiveness of the hybrid material synthesis methodology was confirmed indirectly, using Fourier transform infrared spectroscopy, elemental and colorimetric analysis. Dispersive-morphological analysis indicates that the products with the best properties were obtained using 10 parts by weight of magnesium lignosulfonate per 100 parts of Syloid®244 silica. The relatively high thermal stability recorded for the majority of the synthesized products indicates the potential use of this kind of a material as a polymer filler. Results indicating the high electrokinetic stability of the materials are also of great importance. Additionally, the very good porous structure properties indicate the potential use of silica/lignosulfonate systems as biosorbents of hazardous metal ions and harmful organic compounds.

Solvothermal synthesis of hydrophobic chitin–polyhedral oligomeric silsesquioxane (POSS) nanocomposites

Chitinous scaffolds isolated from the skeleton of marine sponge Aplysina cauliformis were used as a template for the deposition of polyhedral oligomeric silsesquioxanes (POSS). These chitin-POSS based composites with hydrophobic properties were prepared for the first time using solvothermal synthesis (pH 3, temp 80 °C), and were thoroughly characterized. The resulting material was studied using scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and thermogravimetry. A mechanism for the chitin-POSS interaction after exposure to these solvothermal conditions is proposed and discussed.

Adsorption of C.I. Natural Red 4 onto Spongin Skeleton of Marine Demosponge

C.I. Natural Red 4 dye, also known as carmine or cochineal, was adsorbed onto the surface of spongin-based fibrous skeleton of Hippospongia communis marine demosponge for the first time. The influence of the initial concentration of dye, the contact time, and the pH of the solution on the adsorption process was investigated. The results presented here confirm the effectiveness of the proposed method for developing a novel dye/biopolymer hybrid material. The kinetics of the adsorption of carmine onto a marine sponge were also determined. The experimental data correspond directly to a pseudo-second-order model for adsorption kinetics (r2 = 0.979–0.999). The hybrid product was subjected to various types of analysis (FT-IR, Raman, 13C CP/MAS NMR, XPS) to investigate the nature of the interactions between the spongin (adsorbent) and the dye (the adsorbate). The dominant interactions between the dye and spongin were found to be hydrogen bonds and electrostatic effects. Combining the dye with a spongin support resulted with a novel hybrid material that is potentially attractive for bioactive applications and drug delivery systems.

Immobilization of Titanium(IV) Oxide onto 3D Spongin Scaffolds of Marine Sponge Origin According to Extreme Biomimetics Principles for Removal of C.I. Basic Blue 9

The aim of extreme biomimetics is to design a bridge between extreme biomineralization and bioinspired materials chemistry, where the basic principle is to exploit chemically and thermally stable, renewable biopolymers for the development of the next generation of biologically inspired advanced and functional composite materials. This study reports for the first time the use of proteinaceous spongin-based scaffolds isolated from marine demosponge Hippospongia communis as a three-dimensional (3D) template for the hydrothermal deposition of crystalline titanium dioxide. Scanning electron microscopy (SEM) assisted with energy dispersive X-ray spectroscopy (EDS) mapping, low temperature nitrogen sorption, thermogravimetric (TG) analysis, X-ray diffraction spectroscopy (XRD), and attenuated total reflectance–Fourier transform infrared (ATR–FTIR) spectroscopy are used as characterization techniques. It was found that, after hydrothermal treatment crystalline titania in anatase form is obtained, which forms a coating around spongin microfibers through interaction with negatively charged functional groups of the structural protein as well as via hydrogen bonding. The material was tested as a potential heterogeneous photocatalyst for removal of C.I. Basic Blue 9 dye under UV irradiation. The obtained 3D composite material shows a high efficiency of dye removal through both adsorption and photocatalysis.

Extreme biomimetics: A carbonized 3D spongin scaffold as a novel support for nanostructured manganese oxide(IV) and its electrochemical applications

Composites containing biological materials with nanostructured architecture have become of great interest in modern materials science, yielding both interesting chemical properties and inspiration for biomimetic research. Herein, we describe the preparation of a novel 3D nanostructured MnO2-based composite developed using a carbonized proteinaceous spongin template by an extreme biomimetics approach. The thermal stability of the spongin-based scaffold facilitated the formation of both carbonized material (at 650 °C with exclusion of oxygen) and manganese oxide with a defined nanoscale structure under 150 °C. Remarkably, the unique network of spongin fibers was maintained after pyrolysis and hydrothermal processing, yielding a novel porous support. The MnO2-spongin composite shows a bimodal pore distribution, with macropores originating from the spongin network and mesopores from the nanostructured oxidic coating. Interestingly, the composites also showed improved electrochemical properties compared to those of MnO2. Voltammetry cycling demonstrated the good stability of the material over more than 3,000 charging/discharging cycles. Additionally, electrochemical impedance spectroscopy revealed lower charge transfer resistance in the prepared materials. We demonstrate the potential of extreme biomimetics for developing a new generation of nanostructured materials with 3D centimeter-scale architecture for the storage and conversion of energy generated from renewable natural sources.

Removal of lead(II) ions by an adsorption process with the use of an advanced SiO2/lignin biosorbent

Abstract We demonstrate here that lignin can be successfully combined with silica to create a multifunctional material with considerable sorption capabilities. Experiments were carried out in which a silica/lignin hybrid was used for the removal of lead(II) ions from water solutions. Adsorption kinetics were also determined and preliminary regeneration tests were performed. The effectiveness of the adsorption process depends on the following parameters: contact time of adsorbent and adsorbate (equilibrium times: 5 min for concentration 25 mg/L, 10 min for 50 and 75 mg/L, 60 min for 100 mg/L), pH (optimal pH = 5) and adsorbent mass. The kinetics of the adsorption of lead(II) ions on the SiO2/lignin biosorbent are best described by a pseudo-second-order model. Adsorption isotherms of lead(II) ions were also determined. The experimental data were found to be in agreement with the Langmuir model, and the maximal sorption capacity of the adsorbent with respect to lead(II) was 89.02 mg/g.