Tony de Paolo

Skill Assessment of Resolving Ocean Surface Current Structure Using Compact-Antenna-Style HF Radar and the MUSIC Direction-Finding Algorithm

A skill analysis of the Multiple Signal Characterization (MUSIC) algorithm used in compact-antennastyle HF radar ocean current radial velocity/bearing determination is performed using simulation. The simulation is based upon three collocated antennas (two cross loops and a monopole with ideal gain patterns) in a geometry similar to the 25-MHz SeaSonde HF radar commercially available from Coastal Ocean Dynamics Applications Radar (CODAR) Ocean Sensors, Palo Alto, California. The simulations consider wind wave/current scenarios of varying complexity to provide insight to the accuracy of surface current retrievals and the inherent limitations of the technique, with a focus on the capabilities of the MUSIC algorithm itself. The influence of second-order scatter, interference, and stationary target scatter are not considered. Simple error reduction techniques are explored and their impacts quantified to aid in operational system configuration and encourage areas of further research. Increases in skill between 55% and 100% using spatial averaging, and between 14% and 33% using temporal averaging, are realized, highlighting the utility of these techniques. When these error-flagging and averaging techniques are employed, individual range cell skill metrics are found to be as high as 0.94 for simple currents at a high signal-to-noise ratio (SNR), while more complex currents achieve a maximum skill metric of 0.72 for the same SNR. These simulations, conducted under ideal conditions, provide insight to understanding the variables, which influence the accuracy of surface currents retrieved using MUSIC.

Real-Time Ocean Wind Vector Retrieval from Marine Radar Image Sequences Acquired at Grazing Angle

AbstractThis paper proposes a novel algorithm for retrieving the ocean wind vector from marine radar image sequences in real time. It is presented as an alternative to mitigate anemometer problems, such as blockage, shadowing, and turbulence. Since wind modifies the sea surface, the proposed algorithm is based on the dependence of the sea surface backscatter on wind direction and speed. This algorithm retrieves the wind vector using radar measurements in the range of 200–1500 m. Wind directions are retrieved from radar images integrated over time and smoothed (averaged) in space by searching for the maximum radar cross section in azimuth as the radar cross section is largest for upwind directions. Wind speeds are retrieved by an empirical third-order polynomial geophysical model function (GMF), which depends on the range distance in the upwind direction to a preselected intensity level and the intensity level. This GMF is approximated from a dataset of collocated in situ wind speed and radar measurements ...

Improving HF Radar Estimates of Surface Currents Using Signal Quality Metrics, with Application to the MVCO High-Resolution Radar System

AbstractEstimates of surface currents over the continental shelf are now regularly made using high-frequency radar (HFR) systems along much of the U.S. coastline. The recently deployed HFR system at the Martha’s Vineyard Coastal Observatory (MVCO) is a unique addition to these systems, focusing on high spatial resolution over a relatively small coastal ocean domain with high accuracy. However, initial results from the system showed sizable errors and biased estimates of M2 tidal currents, prompting an examination of new methods to improve the quality of radar-based velocity data. The analysis described here utilizes the radial metric output of CODAR Ocean Systems’ version 7 release of the SeaSonde Radial Site Software Suite to examine both the characteristics of the received signal and the output of the direction-finding algorithm to provide data quality controls on the estimated radial currents that are independent of the estimated velocity. Additionally, the effect of weighting spatial averages of radia...

A New Inversion Method to Obtain Upper-Ocean Current-Depth Profiles Using X-Band Observations of Deep-Water Waves

AbstractA new method for estimating current-depth profiles from observations of wavenumber-dependent Doppler shifts of the overlying ocean wave field is presented. Consecutive scans of marine X-band backscatter provide wave field measurements in the time–space domain that transform into the directional wavenumber–frequency domain via a 3D fast Fourier transform (FFT). Subtracting the linear dispersion shell yields Doppler shift observations in the form of (kx, ky, Δω) triplets. A constrained linear regression technique is used to extract the wavenumber-dependent effective velocities, which represent a weighted depth average of the Eulerian currents (Stewart and Joy). This new method estimates these Eulerian currents from the effective velocities via the inversion of the integral relationship, which was first derived by Stewart and Joy. To test the effectiveness of the method, the inverted current profiles are compared to concurrent ADCP measurements. The inversion method is found to successfully predict c...

The Development of an Inversion Technique to Extract Vertical Current Profiles from X-Band Radar Observations

AbstractThe influence of wave–current interactions on time series of marine X-band radar backscatter maps at the mouth of the Columbia River (MCR) near Astoria, Oregon, is examined. The energetic wave environment at the MCR, coupled with the strong tidally forced currents, provides a unique test environment to explore the limitations in accurately determining the magnitude and vertical structure of upper-ocean currents from wavefield measurements. Direct observation in time and space of the wave-induced radar backscatter and supporting acoustic Doppler current profiler (ADCP) current measurements provide a rich dataset for investigating how currents shift the observed wave dispersion relationship. First, current extraction techniques that assume a specific current–depth profile are tested against ADCP measurements. These constrained solutions prove to have inaccuracies because the models do not properly account for vertical shear. A forward solution using measured current profiles to predict the wavenumbe...

Real-time estimation of ocean wave fields from marine radar data

This paper discusses methods for using measurements of the backscattered power and the Doppler shift of radar signals scattered from the ocean surface to compute maps of phase resolved ocean wave fields. Results are compared with buoy and lidar measurements of ocean surface waves off the coast of southern California.

Observations of surface current and current shear using X-band radar

The collection and processing of X-Band radar backscatter in the frequency-wavenumber domain holds promise for extracting information about ocean surface currents and vertical shear. The ability to sense this information remotely has potentially significant impacts on scientific, navigational, and military operations, especially in areas of energetic currents. We present results from an experiment conducted in a shallow, tidally forced river inlet. First, X-Band observations of wave dynamics in the highly energetic region of the Columbia River Inlet (OR, USA) are presented. Second, a bulk current retrieval technique is discussed. Finally, the presence of vertical current shear is shown to affect X-Band observations in the wavenumber dependence of current-induced Doppler shifts.

Airborne Remote Sensing of the Upper Ocean Turbulence during CASPER-East

This study takes on the challenge of resolving upper ocean surface currents with a suite of airborne remote sensing methodologies, simultaneously imaging the ocean surface in visible, infrared, and microwave bands. A series of flights were conducted over an air-sea interaction supersite established 63 km offshore by a large multi-platform CASPER-East experiment. The supersite was equipped with a range of in situ instruments resolving air-sea interface and underwater properties, of which a bottom-mounted acoustic Doppler current profiler was used extensively in this paper for the purposes of airborne current retrieval validation and interpretation. A series of water-tracing dye releases took place in coordination with aircraft overpasses, enabling dye plume velocimetry over 100 m to 10 km spatial scales. Similar scales were resolved by a Multichannel Synthetic Aperture Radar, which resolved a swath of instantaneous surface velocities (wave and current) with 10 m resolution and 5 cm/s accuracy. Details of the skin temperature variability imprinted by the upper ocean turbulence were revealed in 1–14,000 m range of spatial scales by a mid-wave infrared camera. Combined, these methodologies provide a unique insight into the complex spatial structure of the upper ocean turbulence on a previously under-resolved range of spatial scales from meters to kilometers. However, much attention in this paper is dedicated to quantifying and understanding uncertainties and ambiguities associated with these remote sensing methodologies, especially regarding the smallest resolvable turbulent scales and reference depths of retrieved currents.

Measurement of S-, C-, and X-band propagation in the marine atmospheric boundary layer

Radiowave propagation in the marine atmospheric boundary layer (MABL) remains a subject of research interest given the potential utility of the ducting propagation mechanism. Ducting propagation is highly dependent on atmospheric conditions; experiments that combine propagation measurements with detailed atmospheric characterization can offer opportunities for improved modeling of the MABL effects on propagation in the future. Two recent campaigns provided an opportunity to measure propagation in the MABL.