Toolseeram Ramjeawon

Life cycle assessment of cane-sugar on the island of mauritius

Goal, Scope and BackgroundAgricultural production includes not only crop production, but also food processing, transport, distribution, preparation, and disposal. The effects of all these must be considered and controlled if the food chain is to be made sustainable. The goal of this case study was to identify and review the significant areas of potential environmental impacts across the whole life cycle of cane sugar on the island of Mauritius.MethodsThe functional unit was one tonne of exported raw sugar from the island. The life cycle investigated includes the stage of cane cultivation and harvest, cane burning, transport, fertilizer and herbicide manufacture, cane sugar manufacture and electricity generation from bagasse. Data was gathered from companies, factories, sugar statistics, databases and literature. Energy depletion, climate change, acidification, oxidant formation, nutrification, aquatic ecotoxicity and human toxicity were assessed.Results and DiscussionThe inventory of the current sugar production system revealed that the production of one tonne of sugar requires, on average, a land area of 0.12 ha, the application of 0.84 kg of herbicides and 16.5 kg of N-fertilizer, use of 553 tons of water and 170 tonne-km of transport services. The total energy consumption is about 14235 MJ per tonne of sugar, of which fossil fuel consumption accounts for 1995 MJ and the rest is from renewable bagasse. 160 kg of CO2 per tonne of sugar is released from fossil fuel energy use and the net avoided emissions of CO2 on the island due to the use of bagasse as an energy source is 932,000 tonnes. 1.7 kg TSP, 1.21 kg SO2,1.26 kgNOxand 1.26 kg CO are emitted to the air per tonne of sugar produced. 1.7 kg N, 0.002 kg herbicide, 19.1 kg COD, 13.1 kgTSS and 0.37 kg PO43- are emitted to water per tonne of sugar produced. Cane cultivation and harvest accounts for the largest environmental impact (44%) followed by fertilizer and herbicide manufacture (22%), sugar processing and electricity generation (20%), transportation (13%) and cane burning (1%). Nutrification is the main impact followed by acidification and energy depletion.ConclusionsThere are a number of options for improvement of the environmental performance of the cane-sugar production chain. Cane cultivation, and fertilizer and herbicide manufacture, were hotspots for most of the impact categories investigated. Better irrigation systems, precision farming, optimal use of herbicides, centralisation of sugar factories, implementation of co-generation projects and pollution control during manufacturing and bagasse burning are measures that would considerably decrease resource use and environmental impacts.Recommendation and OutlookLCA was shown to be a valuable tool to assess the environmental impacts throughout the food production chain and to evaluate government policies on agricultural production systems.

Cleaner production in Mauritian cane-sugar factories

Abstract A growing awareness of the impacts of pollution on the environment, coupled with the introduction of sectoral effluent standards by the Mauritian environment authorities, have led to the current situation whereby the sugar factories need to introduce appropriate water and wastewater management systems. The cane-sugar industry has been given 3 years to comply with the legislation on effluent standards. During that 3 year period the industry will have to investigate cleaner production opportunities, select appropriate waste treatment technologies, gain operational experience and confidence with the technology and introduce environmental management systems. The case-study taken from the cane-sugar industry in Mauritius illustrate the extent to which environmental improvements are possible through cleaner production.

Determination of lead, chromium and zinc in sediments from an urbanized river in Mauritius.

The mean concentration of Cr (105 +/- 30 mg kg(-1)), Zn (167 +/- 30 mg kg(-1)) and Pb (14 +/- 7 mg kg(-1)) in the sediments along St. Louis River situated in an urbanized and industrialized area in Mauritius were well below the limits of 600, 2500 and 700 mg kg(-1) quoted for contaminated sediments adopted from the draft standards (24% clay and 10% organic matter by weight) from the Netherlands [Van Veen RJ, Stortelder PBM. Research on contaminated sediments in the Netherlands. In: Wolf K, Van de Brink WJ, Colon FJ, editors. Contaminated soil. Academic Publisher, 1998. p. 1263-1275.]. Industrial contamination appeared to undergo rapid dilution in the estuary as Cr had high levels near point sources from industries, but decreased rapidly in amount in the estuary possibly because of dilution by other sediments. The significant levels of Zn in sediments from upstream to the estuary suggest that the potential sources could be from the adjacent motorway and road runoff causing significant quantities to be trapped within the St. Louis River. Pb was two folds higher in the sediments in the estuary of St. Louis River compared to upstream and downstream indicating accumulation of Pb in estuarine sediments, which could be released continuously into the lagoon. The potential sources of Pb in sediments from upstream to the estuary were from the adjacent motorway and road runoff causing significant quantities to be trapped within the St. Louis River. Pb and Zn were significantly positively correlated in the sediments along St. Louis River indicating a common source for Pb and Zn. Significant negative correlations were also found for both Pb and Zn with dissolved oxygen in summer along St. Louis River which indicated that the presence of anoxic waters influenced the trapping of Zn and Pb in the sediment phase. This study has also highlighted that a phasedown of Pb in petrol is necessary and with the introduction of unleaded petrol and vehicles equipped with catalytic converters, studies on levels of Pd and Pt to provide baseline data need to be done in the near future and integrated in environmental development schemes and effective coastal zone management of small island states.

The relationship of dissolved Pb to some dissolved trace metals (Al, Cr, Mn, and Zn) and to dissolved nitrate and phosphate in a freshwater aquatic system in Mauritius

The relationship of some dissolved trace metals (Al, Cr, Mn, Zn, and Pb) with one another and to dissolved phosphate and nitrate in a freshwater aquatic system at Flic en Flac and Grand River North West (GRNW) in Mauritius (1850 km2, 20 degrees S and 57 degrees E, Western Indian ocean) is reported following trace metal determination using inductively coupled plasma mass spectrometry (ICP-MS). Dissolved Al (<200 ng ml(-1)), Cr (<50 ng ml(-1)), Mn (<50 ng ml(-1)), Zn (< 100 ng ml(-1)), and Pb (<50 ng ml(-1)) upstream, downstream GRNW and in the marshes and rivulet at Flic en Flac were found to be below the recommended EEC maximum admissible concentrations and within the ambient drinking water quality standards in Mauritius. Dissolved Pb was significantly positively correlated to both dissolved Cr and Zn suggesting that the cycling for dissolved Pb is linked to the cycling of both dissolved Cr and Zn along GRNW. The common influential cycling of Pb and Zn was further reinforced as both dissolved Pb and Zn were significantly positively correlated to dissolved phosphate, which suggested a biological role in the cycling of Zn and Pb. The role of biological activity or adsorption to biological systems in Pb cycling along GRNW is further suggested as dissolved Pb was significantly correlated to dissolved nitrate. The apparent absence of the dissolved Al, Cr, and Mn with dissolved nitrate and phosphate could be attributed to factors such as the lower sensitivity of the GRNW to metal uptake during biological activity during the time frame considered. The cycling of dissolved Al and Mn was also not linked to the cycling of Cr, Zn, and Pb as no significant correlation was found along GRNW.

Life Cycle Assessment (LCA) of PET bottles and comparative LCA of three disposal options in Mauritius

Disposal of the increasing volume of used Polyethylene Terephthalate (PET) bottles has been a cause for concern for the Mauritian Government. To assist Government in decision-making, a study on PET bottles and its disposal was undertaken using the Life Cycle Assessment (LCA) tool. Three disposal scenarios, namely (100%) landfilling; (100%) incineration; and 50% landfilling and 50% incineration were compared. Sima Pro 5.1 software was used to analyse data and Eco-indicator 99 method was used for the impact assessment. The results showed that about 90% of the total environmental impact happened during the assembly and use phase of PET bottles. 100% incineration was found to be the most preferred option.