Torsten Brezesinski

Ordered mesoporous [alpha]-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors

Capacitive energy storage is distinguished from other types of electrochemical energy storage by short charging times and the ability to deliver significantly more power than batteries. A key limitation to this technology is its low energy density and for this reason there is considerable interest in exploring pseudocapacitive materials where faradaic mechanisms offer increased levels of energy storage. Here we show that the capacitive charge-storage properties of mesoporous films of iso-oriented alpha-MoO(3) are superior to those of either mesoporous amorphous material or non-porous crystalline MoO(3). Whereas both crystalline and amorphous mesoporous materials show redox pseudocapacitance, the iso-oriented layered crystalline domains enable lithium ions to be inserted into the van der Waals gaps of the alpha-MoO(3). We propose that this extra contribution arises from an intercalation pseudocapacitance, which occurs on the same timescale as redox pseudocapacitance. The result is increased charge-storage capacity without compromising charge/discharge kinetics in mesoporous crystalline MoO(3).

Templated Nanocrystal-Based Porous TiO2 Films for Next-Generation Electrochemical Capacitors

The advantages in using nanoscale materials for electrochemical energy storage are generally attributed to short diffusion path lengths for both electronic and lithium ion transport. Here, we consider another contribution, namely the charge storage from faradaic processes occurring at the surface, referred to as pseudocapacitive effect. This paper describes the synthesis and pseudocapacitive characteristics of block copolymer templated anatase TiO(2) thin films synthesized using either sol-gel reagents or preformed nanocrystals as building blocks. Both materials are highly crystalline and have large surface areas; however, the structure of the porosity is not identical. The different titania systems are characterized by a combination of small- and wide-angle X-ray diffraction/scattering, combined with SEM imaging and physisorption measurements. Following our previously reported approach, we are able to use the voltammetric sweep rate dependence to determine quantitatively the capacitive contribution to the current response. Considerable enhancement of the electrochemical properties results when the films are both made from nanocrystals and mesoporous. Such materials show high levels of capacitive charge storage and high insertion capacities. By contrast, when mesoscale porosity is created in a material with dense walls (rather than porous walls derived from the aggregation of nanocrystals), insertion capacities comparable to templated nanocrystal films can be achieved, but the capacitance is much lower. The results presented here illustrate the importance of pseudocapacitive behavior that develops in high surface area mesoporous oxide films. Such systems provide a new class of pseudocapacitive materials, which offer increased charge storage without compromising charge storage kinetics.

Pseudocapacitive Contributions to Charge Storage in Highly Ordered Mesoporous Group V Transition Metal Oxides with Iso-Oriented Layered Nanocrystalline Domains

Amphiphilic block copolymers are very attractive as templates to produce inorganic architectures with nanoscale periodicity because of their ability to form soft superstructures and to interact with inorganic materials. In this paper, we report the synthesis and electrochemical properties of highly ordered mesoporous T-Nb(2)O(5), L-Ta(2)O(5), and TaNbO(5) solid solution thin films with iso-oriented layered nanocrystalline domains. These oxide materials were fabricated by coassembly of inorganic sol-gel reagents with a poly(ethylene-co-butylene)-b-poly(ethylene oxide) diblock copolymer, referred to as KLE. We establish that all materials employed here are highly crystalline and have an ordered cubic pore-solid architecture after thermal treatment. We also demonstrate that these group V transition metal oxides can be readily produced with a high degree of crystallographic alignment on virtually any substrate in contrast to classical solution-phase epitaxy which requires the use of a single-crystalline substrate to achieve oriented crystal growth. Moreover, we show the benefits of producing a material with both a mesoporous morphology and crystallographically oriented domains. Mesoporous T-Nb(2)O(5) films exhibit high levels of pseudocapacitive charge storage and much higher capacities than mesoporous amorphous films of the same initial Nb(2)O(5) composition. Part of this high capacity stems from very facile intercalation pseudocapacitance. This process occurs at rates comparable to traditional redox pseudocapacitance in high surface area Nb(2)O(5) because of the periodic nanoscale porosity, the iso-orientation of the layered nanocrystalline pore walls, and the mechanical flexibility of periodic porous materials.

Ordered Mesoporous Sb-, Nb-, and Ta-Doped SnO2 Thin Films with Adjustable Doping Levels and High Electrical Conductivity

This paper describes the synthesis and electrical properties of self-organized Sb-, Nb-, and Ta-doped SnO(2) thin films with adjustable doping levels. These transparent conducting oxides (TCOs) were prepared using a poly(ethylene-co-butylene)-b-poly(ethylene oxide) diblock copolymer as well as a novel polyisobutylene-b-poly(ethylene oxide) as organic templates. All samples are highly crystalline and have ordered cubic pore-solid architectures after removal of the polymer template by calcination; however, the electrical conductivity is not identical. The films are characterized by a combination of small- and wide-angle X-ray diffraction/scattering, SEM/TEM imaging, and X-ray photoelectron spectroscopy. Resistivity measurements conducted on the mesoporous frameworks show that the electrical properties strongly depend on both the degree of crystallinity and the elemental makeup. Considerable enhancements of the electrical properties result when the films are doped with antimony and treated in N(2) at elevated temperatures. Such TCO materials show electrical resistivities which are--despite the mesoporous morphology--only 1 order of magnitude higher than reported values for dense Sb-doped SnO(2) films.

Ordered Mesoporous Silicon through Magnesium Reduction of Polymer Templated Silica Thin Films

This paper describes the process of making ordered mesoporous silicon (Si) thin films. The process begins with mesoporous silica (SiO 2) thin films that are produced via evaporation induced self-assembly (EISA) using sol-gel silica precursors with a diblock copolymer template. This results in a film with a cubic lattice of 15 nm diameter pores and 10 nm thick walls. The silicon is produced through reduction of the silica thin films in a magnesium (Mg) vapor at 675 degrees C. Magnesium reduction preserves the ordered pore-solid architecture but replaces the dense silica walls with 10-17 nm silicon crystallites. The resulting porous silicon films are characterized by a combination of low and high angle X-ray diffraction, combined with direct SEM imaging. The result is a straightforward route to the production of ordered nanoporous silicon.

Ordered mesoporous α-Fe2O3 (hematite) thin-film electrodes for application in high rate rechargeable lithium batteries.

Herein is reported the synthesis of ordered mesoporous α-Fe(2)O(3) thin films produced through coassembly strategies using a poly(ethylene-co-butylene)-block-poly(ethylene oxide) diblock copolymer as the structure-directing agent and hydrated ferric nitrate as the molecular precursor. The sol-gel derived α-Fe(2)O(3) materials are highly crystalline after removal of the organic template and the nanoscale porosity can be retained up to annealing temperatures of 600 °C. While this paper focuses on the characterization of these materials using various state-of-the-art techniques, including grazing-incidence small-angle X-ray scattering, time-of-flight secondary ion mass spectrometry, X-ray photoelectron spectroscopy, and UV-vis and Raman spectroscopy, the electrochemical properties are also examined and it is demonstrated that mesoporous α-Fe(2)O(3) thin-film electrodes not only exhibit enhanced lithium-ion storage capabilities compared to bulk materials but also show excellent cycling stabilities by suppressing the irreversible phase transformations that are observed in microcrystalline α-Fe(2)O(3).

Nanocrystalline NiMoO4 with an ordered mesoporous morphology as potential material for rechargeable thin film lithium batteries

Nanocrystalline nickel molybdate (NiMoO(4)) thin film electrodes with a 3D honeycomb structure of uniform 17 nm diameter pores were successfully produced through facile polymer templating strategies. These novel sol-gel type materials exhibit enhanced lithium ion storage capabilities, and thus show promise for battery applications.

On the Correlation between Mechanical Flexibility, Nanoscale Structure, and Charge Storage in Periodic Mesoporous CeO2 Thin Films

In this work, we report the synthesis and characterization of highly ordered mesoporous CeO(2) thin films with crystalline walls. While this article focuses on electrochemical studies of CeO(2) with periodic nanoscale porosity, we also examine the mechanical properties of these films and show how pore flexing can be used to facilitate intercalation of lithium ions. Mesoporous samples were prepared by dip-coating using the large diblock copolymer KLE as the organic template. We establish that the films have a mesoporous network with a biaxially distorted cubic pore structure and are highly crystalline at the atomic scale when heated to temperatures above 500 degrees C. Following a previously reported approach, we were able to use the voltammetric sweep rate dependence to determine quantitatively the capacitive contribution to electrochemical charge storage. The net result is that mesoporous CeO(2) films exhibit reasonable levels of pseudocapacitive charge storage and much higher capacities than samples prepared without any polymer template. Part of this increased capacity stems from the fact that these films are able to expand normal to the substrate upon intercalation of lithium ions by flexing of the nanoscale pores. This flexing relieves stress from volume expansion that normally inhibits charge storage. Overall, the results described in this work provide fundamental insight into how nanoscale structure and mechanical flexibility can be used to increase charge storage capacity in metal oxides.

On the correlation between nanoscale structure and magnetic properties in ordered mesoporous cobalt ferrite (CoFe2O4) thin films.

In this work, we report the synthesis of periodic nanoporous cobalt ferrite (CFO) that exhibits tunable room temperature ferrimagnetism. The porous cubic CFO frameworks are fabricated by coassembly of inorganic precursors with a large amphiphilic diblock copolymer, referred to as KLE. The inverse spinel framework boasts an ordered open network of pores averaging 14 nm in diameter. The domain sizes of the crystallites are tunable from 6 to 15 nm, a control which comes at little cost to the ordering of the mesostructure. Increases in crystalline domain size directly correlate with increases in room temperature coercivity. In addition, these materials show a strong preference for out-of-plane oriented magnetization, which is unique in a thin film system. The preference is explained by in-plane tensile strain, combined with relaxation of the out-of-plane strain through flexing of the mesopores. It is envisioned that the pores of this ferrimagnet could facilitate the formation of a diverse range of exchange coupled composite materials.

The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries

Sulfur–carbon composites are promising next generation cathode materials for high energy density lithium batteries and thus, their discharge and charge properties have been studied with increasing intensity in recent years. While the sulfur-based redox reactions are reasonably well understood, the knowledge of deleterious side reactions in lithium–sulfur batteries is still limited. In particular, the gassing behavior has not yet been investigated, although it is known that lithium metal readily reacts with the commonly used ethereal electrolytes. Herein, we describe, for the first time, gas evolution in operating lithium–sulfur cells with a diglyme-based electrolyte and evaluate the effect of the polysulfide shuttle-suppressing additive LiNO3. The use of the combination of two operando techniques (pressure measurements and online continuous flow differential electrochemical mass spectrometry coupled with infrared spectroscopy) demonstrates that the additive dramatically reduces, but does not completely eliminate gassing. The major increase in pressure occurs during charge, immediately after fresh lithium is deposited, but there are differences in gas generation during cycling depending on the addition of LiNO3. Cells with LiNO3 show evolution of N2 and N2O in addition to CH4 and H2, the latter being the main volatile decomposition products. Collectively, these results provide novel insight into the important function of LiNO3 as a stabilizing additive in lithium–sulfur batteries.