Toshiaki Takagi

Application of Local Tomography Technique to High-Resolution Synchrotron X-Ray Imaging

X-ray CT method is a kind of nondestructive inspection, but has strong limitation in sample size due to a small field of view (FOV). The higher the resolution, the smaller FOV is, mainly due to the element number of available detectors commercially. Therefore, sample machining is more or less necessary so that the sample size is fit within the small FOV in the case of the high-resolution observation. Local tomography technique enables a high resolution reconstruction of small region of interests within a sample without the sample machining. In this study, we have evaluated the size effects of aluminum foam samples in terms of the 3D image quality by the local tomography techniques.

Application of High-Strain-Rate Superplastic Zn-Al Alloy to Seismic Dampers and its Optimised Shape Design

As a new damping material, the authors first developed a Zn-22wt.%-Al eutectoid alloy with ultra-fine grains exhibiting superplasticity at room temperature by means of thermomechanical controlling processes (TMCPs). The Zn-Al alloy has a few advantages such as low work-hardening rate and high ductility over a conventional seismic damping material, for instance, a low-yield-point steel. In addition, Zn-Al alloys are environment-conscious because of no harmful metal like Pb. However, when Zn-Al alloys are subjected to plastic deformation, since its work hardening is small, plastic deformation proceeds locally so that required absorption energy cannot be sufficiently obtained, and local fracture and local deformation instability can take place easily, which is the intrinsic characteristic of superplastic materials. Therefore we attempted to develop a shear panel type, a brace type damper for tall buildings and a bending type damper for Japanese wooden houses using FEM analysis in order to minimize localized strain and local deformation and to determine the optimum shape for this Zn-Al superplastic seismic damper. As a result, an ecological and high-energy absorption seismic dampers, so-called “maintenance-free seismic damper,” was successfully developed.

Three-Dimensional Zinc Mapping inside Aluminum Foams Using Synchrotron X-Ray Microtomography

Three-dimensional zinc mapping based on X-ray K-edge scanning has been performed. By microtomographies with energies above and below the K-absorption edges of the elements, the concentration distribution of the elements is evaluated during in-situ experiments, respectively. It is found that the Zn concentration distribution during the heat treatment was changed inside the cell wall of the aluminum foams and it has been homogenized. Also several precipitated phase transformation can be three-dimensionally visualized by the CT-method tuning X-ray energies.