Toshiki Iwasaki

Computational modeling of 137Cs contaminant transfer associated with sediment transport in Abukuma River.

A numerical model capable of simulating the transfer of (137)Cs in rivers associated with transport of fine sediment is presented. The accident at Fukushima Dai-ichi Nuclear Power Plant (FDNPP) released radionuclides into the atmosphere, and after fallout several radionuclides in them, such as radiocesium ((134)Cs, (137)Cs) and radioiodine ((131)I) were adsorbed on surface soil particles around FDNPP and transported by surface water. To understand the transport and deposition of the radioactive contaminant along with surface soil particles and its flux to the ocean, we modeled the transport of the (137)Cs contaminant by computing the water flow and the associated washload and suspended load transport. We have developed a two-dimensional model to simulate the plane flow structure, sediment transport and associated (137)Cs contaminant transport in rivers by combining a shallow water flow model and an advection-diffusion equation for the transport of sediment. The proposed model has been applied to the lower reach of Abukuma River, which is the main river in the highly contaminated area around FDNPP. The numerical results indicate that most (137)Cs supplied from the upstream river reach with washload would directly reach to Pacific Ocean. In contrast, washload-oriented (137)Cs supplied from the upstream river basin has a limited role in the radioactive contamination in the river. The results also suggest that the proposed framework of computational model can be a potential tool for understanding the sediment-oriented (137)Cs behavior in rivers.

Numerical simulation of effects of sediment supply on bedrock channel morphology

AbstractNatural bedrock rivers exhibit diverse erosional morphologies. Although the formation of alternate bars on bedrock has been noted in previous studies, the influence of these alternate bars on bedrock erosion has not been clarified. In this study, the authors propose a model for bedrock-alluvial channels that reproduces both bar formation and erosional morphology. In addition, the authors report on numerical simulations to evaluate the influence of sediment supply on the state of the bed at and over the bedrock surface. The numerical results illustrate the formation of different morphologies for different supply rates. When the sediment supply rate is close to transport capacity, mixed alluvial-bedrock alternate bars form. These bars are analogous to purely alluvial alternate bars. A meandering thread of alluvial material migrates downstream over a uniformly eroding bedrock surface. When the sediment supply rate is well below capacity, however, multiple incisional troughs (grooves) form on the bedr...

Hydrogeomorphological differentiation between floodplains and terraces

Floodplains and terraces in river valleys play important roles in the transport dynamics of water and sediment. While flat areas in river valleys can be identified from LiDAR data, directly characterizing them as either floodplain or terraces isnot yet possible. To address this challenge, we hypothesize that since geomorphic features are strongly coupled to hydrologic and hydraulic dynamics and their associated variability, there exists a return frequency, or possibly a narrow band of return frequencies, of flow that are associated with floodplain formation; and this association can provide a distinctive signature for distinguishing them from terraces. Based on this hypothesis we develop a novel approach for distinguishing between floodplains and terraces that involves transforming the transverse cross-sectional geometry of a river valley into a curve, named River Valley Hypsometric (RVH) curve, and linking hydraulic inundation frequency with the features of this curve. Our approach establishes that the demarcation between floodplains and terraces can be established from the structure of steps and risers in the RVH curves which can be obtained from the DEM data. Further, it shows that these transitions may themselves be shaped by floods with 10- to 100-yr recurrence. We additionally show that when floodplain width and height (above channel bottom) are normalized by bankfull width and depth, the ratio lies in a narrow range independent of the scale of the river valley.

Numerical simulation of large-scale bed load particle tracer advection-dispersion in rivers with free bars

Asymptotic characteristics of the transport of bed load tracer particles in rivers have been described by advection-dispersion equations. Here we perform numerical simulations designed to study the role of free bars, and more specifically single-row alternate bars, on streamwise tracer particle dispersion. In treating the conservation of tracer particle mass, we use two alternative formulations for the Exner equation of sediment mass conservation: the flux-based formulation, in which bed elevation varies with the divergence of the bed load transport rate, and the entrainment-based formulation, in which bed elevation changes with the net deposition rate. Under the condition of no net bed aggradation/degradation, a 1-D flux-based deterministic model that does not describe free bars yields no streamwise dispersion. The entrainment-based 1-D formulation, on the other hand, models stochasticity via the probability density function (PDF) of particle step length, and as a result does show tracer dispersion. When the formulation is generalized to 2-D to include free alternate bars, however, both models yield almost identical asymptotic advection-dispersion characteristics, in which streamwise dispersion is dominated by randomness inherent in free bar morphodynamics. This randomness can result in a heavy-tailed PDF of waiting time. In addition, migrating bars may constrain the travel distance through temporary burial, causing a thin-tailed PDF of travel distance. The superdiffusive character of streamwise particle dispersion predicted by the model is attributable to the interaction of these two effects.

SIMULATION REAL SCALE EXPERIMENT ON LEVEE BREACH USING 2D SHALLOW FLOW MODEL

Flood in rivers is a common disaster all over the world. If a levee breach happens, it sometimes causes a fatal disaster. In addition, many buildings, urban facilities, lifelines, etc. are seriously damaged. Detailed mechanism of a levee breach has not been clarified yet. Therefore, it is important to predict the collapsing process of riverbank and behavior of overtop flow for reducing damage. We applied a two-dimensional shallow flow computational model to levee breach phenomena caused by overflow and the performance of the model was elucidated. A calibration of the numerical model is made through the comparison with field experimental data. Recently, a real-scale experiment on a levee breach was carried out at the Chiyoda Experimental Channel in Hokkaido, Japan. We performed the computation under the same conditions in the experiment. The computational results showed the excellent performance for simulating levee breach phenomena.