Trevor W. Stevenson

Co-Cultivation of Fungal and Microalgal Cells as an Efficient System for Harvesting Microalgal Cells, Lipid Production and Wastewater Treatment

The challenges which the large scale microalgal industry is facing are associated with the high cost of key operations such as harvesting, nutrient supply and oil extraction. The high-energy input for harvesting makes current commercial microalgal biodiesel production economically unfeasible and can account for up to 50% of the total cost of biofuel production. Co-cultivation of fungal and microalgal cells is getting increasing attention because of high efficiency of bio-flocculation of microalgal cells with no requirement for added chemicals and low energy inputs. Moreover, some fungal and microalgal strains are well known for their exceptional ability to purify wastewater, generating biomass that represents a renewable and sustainable feedstock for biofuel production. We have screened the flocculation efficiency of the filamentous fungus A. fumigatus against 11 microalgae representing freshwater, marine, small (5 µm), large (over 300 µm), heterotrophic, photoautotrophic, motile and non-motile strains. Some of the strains are commercially used for biofuel production. Lipid production and composition were analysed in fungal-algal pellets grown on media containing alternative carbon, nitrogen and phosphorus sources contained in wheat straw and swine wastewater, respectively. Co-cultivation of algae and A. fumigatus cells showed additive and synergistic effects on biomass production, lipid yield and wastewater bioremediation efficiency. Analysis of fungal-algal pellets fatty acids composition suggested that it can be tailored and optimised through co-cultivating different algae and fungi without the need for genetic modification.

Fungal-assisted algal flocculation: application in wastewater treatment and biofuel production

BackgroundThe microalgal-based industries are facing a number of important challenges that in turn affect their economic viability. Arguably the most important of these are associated with the high costs of harvesting and dewatering of the microalgal cells, the costs and sustainability of nutrient supplies and costly methods for large scale oil extraction. Existing harvesting technologies, which can account for up to 50% of the total cost, are not economically feasible because of either requiring too much energy or the addition of chemicals. Fungal-assisted flocculation is currently receiving increased attention because of its high harvesting efficiency. Moreover, some of fungal and microalgal strains are well known for their ability to treat wastewater, generating biomass which represents a renewable and sustainable feedstock for bioenergy production.ResultsWe screened 33 fungal strains, isolated from compost, straws and soil for their lipid content and flocculation efficiencies against representatives of microalgae commercially used for biodiesel production, namely the heterotrophic freshwater microalgae Chlorella protothecoides and the marine microalgae Tetraselmis suecica. Lipid levels and composition were analyzed in fungal-algal pellets grown on media containing alternative carbon, nitrogen and phosphorus sources from wheat straw and swine wastewater, respectively. The biomass of fungal-algal pellets grown on swine wastewater was used as feedstock for the production of value-added chemicals, biogas, bio-solids and liquid petrochemicals through pyrolysis. Co-cultivation of microalgae and filamentous fungus increased total biomass production, lipid yield and wastewater bioremediation efficiency.ConclusionFungal-assisted microalgal flocculation shows significant potential for solving the major challenges facing the commercialization of microalgal biotechnology, namely (i) the efficient and cost-effective harvesting of freshwater and seawater algal strains; (ii) enhancement of total oil production and optimization of its composition; (iii) nutrient supply through recovering of the primary nutrients, nitrogen and phosphates and microelements from wastewater. The biomass generated was thermochemically converted into biogas, bio-solids and a range of liquid petrochemicals including straight-chain C12 to C21 alkanes which can be directly used as a glycerine-free component of biodiesel. Pyrolysis represents an efficient alternative strategy for biofuel production from species with tough cell walls such as fungi and fungal-algal pellets.

Somatic embryogenesis in Eucalyptus globulus

Somatic embryos were obtained from 1% of cotyledon pieces and hypocotyls of mature embryos of Eucalyptus globulus Labill. cultured on media containing a high concentration of picloram or IBA. 2,4-D and other synthetic auxins did not yield somatic embryos or embryogenic callus. Somatic embryos arose indirectly via callus, being visible after four months, and directly, where little callus or adventitious root initiation occurred. Somatic embryos, formed directly from explants, were visible within five weeks. Various structural abnormalities of somatic embryos were observed, especially after induction on media containing picloram. Only two out of fifteen somatic embryos showed hypocotyl and radical elongation, but plantlets did not develop further.

Dual application of duckweed and azolla plants for wastewater treatment and renewable fuels and petrochemicals production

BackgroundShortages in fresh water supplies today affects more than 1 billion people worldwide. Phytoremediation strategies, based on the abilities of aquatic plants to recycle nutrients offer an attractive solution for the bioremediation of water pollution and represents one of the most globally researched issues. The subsequent application of the biomass from the remediation for the production of fuels and petrochemicals offers an ecologically friendly and cost-effective solution for water pollution problems and production of value-added products.ResultsIn this paper, the feasibility of the dual application of duckweed and azolla aquatic plants for wastewater treatment and production of renewable fuels and petrochemicals is explored. The differences in absorption rates of the key wastewater nutrients, ammonium and phosphorus by these aquatic macrophytes were used as the basis for optimization of the composition of wastewater effluents. Analysis of pyrolysis products showed that azolla and algae produce a similar range of bio-oils that contain a large spectrum of petrochemicals including straight-chain C10-C21 alkanes, which can be directly used as diesel fuel supplement, or a glycerin-free component of biodiesel. Pyrolysis of duckweed produces a different range of bio-oil components that can potentially be used for the production of “green” gasoline and diesel fuel using existing techniques, such as catalytic hydrodeoxygenation.ConclusionsDifferences in absorption rates of the key wastewater nutrients, ammonium and phosphorus by different aquatic macrophytes can be used for optimization of composition of wastewater effluents. The generated data suggest that the composition of the petrochemicals can be modified in a targeted fashion, not only by using different species, but also by changing the source plants’ metabolic profile, by exposing them to different abiotic or biotic stresses. This study presents an attractive, ecologically friendly and cost-effective solution for efficient bio-filtration of swine wastewater and petrochemicals production from generated biomass.

Adventitious bud induction in Eucalyptus globulus Labill

SummaryAdventitious buds and shoots of Eucalyptus globulus Labill. (Tasmanian Bluegum) have been regenerated from cotyledons and hypocotyls from mature embryos and seedlings. Adventitious buds, were induced at high frequency with 0.05 μM thidiazuron in combination with 0.2 μM 2,4-dichlorophenoxyacetic acid or 5 μM α-naphthaleneacetic acid. Culture of explants in the dark inhibited bud induction, but up to 86% of cotyledons, longitudinally split just prior to culture, produced adventitious buds, in the light. Development of buds into shoots occurred only at low frequency, after transfer to media containing N6-benzylaminopurine.

Comparison of Serpula lacrymans isolates using RAPD PCR

Four isolates of Serpula lacrymans from Australia and one from each of Germany, Japan and Poland were examined for their similarity to the reference isolate FPRL 12C (from England) by RAPD PCR. Results were compared with those published by others using SDS-PAGE and found to be similar. RAPD PCR was shown to be a fast and reliable technique with potential for detecting S. lacrymans as a cause of wood decay. Other possible applications for this assay could include epidemiological and phylogenetic studies.

GSTT1 null genotype increases risk of premenopausal breast cancer

The NAT2, GSTM1 and GSTT1 genes are known candidate cancer susceptibility markers and have been investigated in breast cancer susceptibility with conflicting results. We conducted a case-control study to investigate the role of NAT2, GSTM1 and GSTT1 in premenopausal breast cancer. Women with the GSTT1 null genotype were found to have a significant 3.15-fold increased risk of breast cancer (95% CI = 1.7-5.8), while GSTM1 and NAT2 genotypes were not associated with breast cancer risk. Our results suggest that the GSTT1 null genotype may play a role in early onset breast cancer.

Isolation and characterisation of a cDNA clone encoding cinnamyl alcohol dehydrogenase in Eucalyptus globulus Labill

Cinnamyl alcohol dehydrogenase (CAD) (EC 1.1.1.195) catalyses the final step in lignin precursor synthesis reducing the cinnamyl aldehydes (para-coumaryl, coniferyl and sinapyl aldehydes) to the corresponding alcohols in the presence of NADPH. In this paper, we report the molecular cloning and characterisation of a Eucalyptus globulus genomic fragment encoding CAD2, and the corresponding full-length cDNA isolated from young stem material. This was achieved using the polymerase chain reaction-based method known as rapid amplification of cDNA ends, with oligonucleotide primers corresponding to regions of homology between CAD-encoding sequences from other eucalypt species. The identity of the clones was inferred by sequence data comparison and the cDNA sequence (1423 bp) was found to encode a protein of 356 amino acid residues. The CAD2 transcript was most abundant in stem, followed by root and midrib tissues, which corresponds with the role of lignin in water retention in plants and in providing mechanical support. Low level expression was also observed in leaf tissue. Southern blot analysis revealed a single CAD gene in this species with the presence of possibly different allelic representations.

Isolation and characterisation of the carnation floral-specific MADS box gene, CMB2

The cDNA clone KD81, was isolated from a carnation petal cDNA library based on its strong differential expression in petals compared with leaves. The deduced amino acid sequence of KD81 indicated high homology with members of the MADS box family of transcription factors. Identified within the deduced amino acid sequence are two conserved domains; an N-terminal, MADS box and a central, K box. The gene encoding KD81 was termed Carnation MADS Box gene 2 (CMB2). Expression of CMB2 is floral-specific and in petal, transcripts were persistent from the initial stages of development through flower opening. Transcripts were not detected in vegetative tissues. The CMB2 protein is most homologous to TDR6 from tomato, the product of the petal and stamen identity gene DEFICIENS (DEFA), and several DEFA homologues including SLM3, STDEF, PMADS1 and APETALA3. Southern blot analysis indicated that CMB2 is present as a single copy within the carnation genome. Characterisation of a genomic clone encoding CMB2, revealed the molecular structure of CMB2 to be consistent with that reported for other plant MADS box genes. Analysis of the CMB2 promoter sequence revealed the presence of two putative cis-acting elements known as serum response elements (SREs). These elements are proposed as the target for MADS box domain binding and may be involved in the regulation/autoregulation of gene expression. CMB2 represents the first reported isolation of a MADS box gene from carnation.

Developmental variation in copper, zinc and metallothionein mRNA in brindled mutant and nutritionally copper deficient mice

The concentrations of copper, zinc and metallothionein-I (MT-I) mRNA were determined in the liver, kidney and brain of the brindled mutant mouse from birth until the time of death. Despite accumulation of copper in the kidney of the mutant, MT-I mRNA concentrations were normal. There was no difference between the MT-I mRNA in the brain of mutant and normal in the first 10 days of life, but after day 10 metallothionein mRNA levels were increased in the mutant. The concentration of copper was very low in the liver of the mutant, and on day 6 after birth the metallothionein mRNA was also reduced by about 50%. This reduction was not seen in copper-deficient 6-day-old pups, despite very low hepatic copper levels. This suggests that the lower hepatic MT-I mRNA in the day 6 brindled mouse was not simply due to the reduction in hepatic copper and also that hepatic copper is not regulating metallothionein gene expression the liver of neonatal mice. After day 12 hepatic MT-I mRNA levels were elevated in mutant and in copper deficient mice, both of which die at 14 to 16 days. These increases and the increase in brain MT-I mRNA in older mutant mice are likely to be caused by stress. Overall the results support the conclusions that the brindled mutation does not cause a constitutive activation of the metallothionein genes, and that the differences in metallothionein mRNA between mutant and normal are most probably secondary consequences of the mutation.