Trinh Tung Ngo

Surface modification and functionalization of carbon nanotube with some organic compounds

In this work the surface modification and functionalization of carbon nanotubes (CNTs) were investigated. CNTs were firstly treated by acid mixture H2SO4/HNO3 to introduce the carboxylic group onto the surface of CNTs. This carboxylic group was used as reaction precursor in the functionalization. Two functional groups, dodecylamine (DDA) and 3-aminopropyl triethoxysilane (3-APTES), were successfully covalently attached to CNTs. The functionalized CNTs were characterized by Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, differential scanning calorimetry and thermal gravimetric analysis (DSC/TGA) and transmission electron microscopy (TEM) methods. The CNTs attached to the organofunctional moieties have greater versatility for further utilization in different application fields such as biology, nanocomposites, solar energy, etc.

Glass transition of PCBM, P3HT and their blends in quenched state

In this work the thermal behavior with the glass transition of phenyl-C61-butyric acid methyl ester (PCBM), poly(3-hexylthiophene) (P3HT) and their blends was investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Both TGA and DSC measurements show that PCBM contains around 1% residual solvent in the crystalline structure. The glass transition of PCBM, P3HT and their blends was determined by quenching techniques. The quenched state of the materials has a strong effect on the glass transition of the materials, especially in the case of PCBM. In all blend compositions only one glass transition temperature was found. These results indicate that PCBM and P3HT are thermodynamically miscible in all blend compositions.

Highly sensitive fluorescence resonance energy transfer (FRET)-based nanosensor for rapid detection of clenbuterol

In this study we investigate the fabrication of a fluorescence resonance energy transfer (FRET)-based nanosensor for the detection of clenbuterol. The nanosensor consists of CdTe quantum dots coated by clenbuterol recognizable agent naphthol and diazotized clenbuterol. Changes in maximal photoluminescent intensities of the nanosensor were utilized to measure clenbuterol concentrations. The maximal photoluminescent intensities of the nanosensor were found to decrease with increasing clenbuterol concentrations, following a linear correlation. We have successfully fabricated a nanosensor for detection of clenbuterol with sensitivity up to 10pgml 1 .

Effect of molecular packing of zinc(II) porphyrins on the performance of field-effect transistors

The charge-transport phenomena of organic conjugated materials have been intensively investigated because of the potential applications of these materials in electronics and optoelectronics. Among these applications, organic field-effect transistors (OFETs) fabricated from either thin films or well-defined single crystals as charge-transporting layers are the most promising electronic devices. In this work, the effect of molecular packing on the performance of OFETs is investigated through the fabrication and characterization of devices based on zinc(II) porphyrins TPZ and TBPZ. The field-effect mobility of the transistors is found to increase with decreasing intermolecular distance, attributable to greater overlap of ? orbitals among close-packed molecules and thereby enhance the charge transport.

Rapid and sensitive detection of clenbuterol using a fluorescence nanosensor based on diazo coupling mechanism

In this paper, the fluorescence resonance energy transfer (FRET) effect has been used for fabrication of nanosensor for the detection of clenbuterol. In the nanosensor, the CdTe quantum dots (QDs) are the donors while the acceptor is the super-macromolecule formed by the diazoation coupling mechanism between diazo clenbuterol and naphthylethylene diamine. Changes in fluorescence intensities of nanosensor were used to determine the clenbuterol concentration. We have successfully fabricated a nanosensor for detection of clenbuterol sensible to clenbuterol concentration of 10−12 g ml−1.

Synthesis of Conjugated Wide-Bandgap Copolymers Bearing Ladder-Type Donating Units and Their Application to Non-Fullerene Polymer Solar Cells

Two new wide-bandgap conjugated copolymers, T-3MT and 2T-3MT, containing methyl-3-thiophenecarboxylate (3MT) as a weak accepting unit and indacenodithiophene (IDT) or indacenodithienothiophene (IDTT) as ladder-type donating units, were synthesized through Stille coupling polymerization. The effects of the IDT and IDTT units on the physical, optical, and electrochemical properties of these copolymers were investigated. Polymer solar cells (PSCs) were constructed using these new copolymers and different acceptor molecules for inter-comparative analysis of their performance. The PSCs bearing the as-cast active layers with 2,2′-((2Z,2′Z)-((4,4,9,9-tetrakis(4-hexylphenyl)-4,9-dihydro-s-indaceno[1,2-b:5,6-b′] dithiophene-2,7-diyl)bis(methanylylidene))bis(3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (IM-IDT) displayed the highest PCEs of 3.78−3.96%, mainly owing to the predominant face-on orientation of blend film, and the relatively high open circuit voltage exceeding 1.0 V.