Tuan K. A. Hoang

Design and synthesis of vanadium hydrazide gels for Kubas-type hydrogen adsorption: a new class of hydrogen storage materials.

In this paper we demonstrate that the Kubas interaction, a nondissociative form of weak hydrogen chemisorption with binding enthalpies in the ideal 20-30 kJ/mol range for room-temperature hydrogen storage, can be exploited in the design of a new class of hydrogen storage materials which avoid the shortcomings of hydrides and physisorpion materials. This was accomplished through the synthesis of novel vanadium hydrazide gels that use low-coordinate V centers as the principal Kubas H(2) binding sites with only a negligible contribution from physisorption. Materials were synthesized at vanadium-to-hydrazine ratios of 4:3, 1:1, 1:1.5, and 1:2 and characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, nitrogen adsorption, elemental analysis, infrared spectroscopy, and electron paramagnetic resonance spectroscopy. The material with the highest capacity possesses an excess reversible storage of 4.04 wt % at 77 K and 85 bar, corresponding to a true volumetric adsorption of 80 kg H(2)/m(3) and an excess volumetric adsorption of 60.01 kg/m(3). These values are in the range of the ultimate U.S. Department of Energy goal for volumetric density (70 kg/m(3)) as well as the best physisorption material studied to date (49 kg H(2)/m(3) for MOF-177). This material also displays a surprisingly high volumetric density of 23.2 kg H(2)/m(3) at room temperature and 85 bar--roughly 3 times higher than that of compressed gas and approaching the DOE 2010 goal of 28 kg H(2)/m(3). These materials possess linear isotherms and enthalpies that rise on coverage and have little or no kinetic barrier to adsorption or desorption. In a practical system these materials would use pressure instead of temperature as a toggle and can thus be used in compressed gas tanks, currently employed in many hydrogen test vehicles, to dramatically increase the amount of hydrogen stored and therefore the range of any vehicle.

Hydride-induced amplification of performance and binding enthalpies in chromium hydrazide gels for Kubas-type hydrogen storage.

Hydrogen is the ideal fuel because it contains the most energy per gram of any chemical substance and forms water as the only byproduct of consumption. However, storage still remains a formidable challenge because of the thermodynamic and kinetic issues encountered when binding hydrogen to a carrier. In this study, we demonstrate how the principal binding sites in a new class of hydrogen storage materials based on the Kubas interaction can be tuned by variation of the coordination sphere about the metal to dramatically increase the binding enthalpies and performance, while also avoiding the shortcomings of hydrides and physisorpion materials, which have dominated most research to date. This was accomplished through hydrogenation of chromium alkyl hydrazide gels, synthesized from bis(trimethylsilylmethyl) chromium and hydrazine, to form materials with low-coordinate Cr hydride centers as the principal H(2) binding sites, thus exploiting the fact that metal hydrides form stronger Kubas interactions than the corresponding metal alkyls. This led to up to a 6-fold increase in storage capacity at room temperature. The material with the highest capacity has an excess reversible storage of 3.23 wt % at 298 K and 170 bar without saturation, corresponding to 40.8 kg H(2)/m(3), comparable to the 2015 DOE system goal for volumetric density (40 kg/m(3)) at a safe operating pressure. These materials possess linear isotherms and enthalpies that rise on coverage, retain up to 100% of their adsorption capacities on warming from 77 to 298 K, and have no kinetic barrier to adsorption or desorption. In a practical system, these materials would use pressure instead of temperature as a toggle and can thus be used in compressed gas tanks, currently employed in the majority of hydrogen test vehicles, to dramatically increase the amount of hydrogen stored, and therefore range of any vehicle.

Kubas-Type Hydrogen Storage in V(III) Polymers Using Tri- and Tetradentate Bridging Ligands

Oxalic acid, oxamide, glycolic acid, and glycolamide were employed as 2-carbon linkers to synthesize a series of one-dimensional V(III) polymers from trismesityl vanadium(III)·THF containing a high concentration of low-valent metal sites that can be exploited for Kubas binding in hydrogen storage. Synthesized materials were characterized by powder X-ray diffraction (PXRD), nitrogen adsorption (BET), X-ray photoelectron spectroscopy (XPS), infrared spectroscopy (IR), Raman spectroscopy, thermogravimetric analysis, and elemental analysis. Because each of these organic linkers possesses a different number of protons and coordinating atoms, the products in each case were expected to have different stoichiometries with respect to the number of mesityl groups eliminated and also a different geometry about the V(III) centers. For example, the oxalate and glycolate polymers contained residual mesityl groups; however, these could be exchanged with hydride via hydrogenolysis. The highest adsorption capacity was recorded on the product of trismesityl vanadium(III)·THF with oxamide (3.49 wt % at 77 K and 85 bar). As suggested by the high enthalpy of adsorption (17.9 kJ/mol H(2)), a substantial degree of performance of the vanadium metal centers was retained at room temperature (25%), corresponding to a gravimetric adsorption of 0.87 wt % at 85 bar, close to the performance of MOF-177 at this temperature and pressure. This is remarkable given the BET surface area of this material is only 9 m(2)/g. A calculation on the basis of thermogravimetric results provides 0.88 hydrogen molecule per vanadium center under these conditions. Raman studies with H(2) and D(2) showed the first unequivocal evidence for Kubas binding on a framework metal in an extended solid, and IR studies demonstrated H(D) exchange of the vanadium hydride with coordinated D(2). These spectroscopic observations are sufficient to assign the rising trends in isosteric heats of hydrogen adsorption observed previously by our group in several classes of materials containing low-valent transition metals to the Kubas interaction.

Cyclopentadienyl chromium hydrazide gels for Kubas-type hydrogen storage

Cyclopentadienyl chromium hydrazide gels were synthesized from the protonolysis reaction between bis(cyclopentadienyl) chromium and hydrazine. The amorphous products containing low valent chromium species are exploited as substrates for Kubas-type hydrogen storage. These materials demonstrate enthalpies that rise from 10 to 45 kJ mol(-1) and show a retention of 49% of the adsorption capacity at 298 K relative to 77 K, compared to values of 10-15% for most MOFs and amorphous carbons.

Titanium hydrazide gels for Kubas-type hydrogen storage

Titanium(III) hydrazide gels designed for Kubas-type hydrogen storage were synthesized from the reaction between tris(bis(trimethylsilyl)methyl) titanium and anhydrous hydrazine. The materials demonstrate a fully reversible H2 adsorption capacity of 2.63 wt% and 36.7 kg m−3 at 298 K and 143 bar without saturation. Interaction between the adsorption center and H2 gas was probed by electron paramagnetic resonance.

Transition Metal Hydrazide‐Based Hydrogen‐Storage Materials: the First Atoms‐In‐Molecules Analysis of the Kubas Interaction

Molecular models of the M-H(2) binding sites of experimentally characterised amorphous vanadium hydrazide gels are studied computationally using gradient corrected density functional theory, to probe the coordination number of the vanadium in the material and the nature of the interaction between the metal and the H(2) molecules. The H(2) is found to bind to the vanadium through the Kubas interaction, and the first quantum theory of atoms-in-molecules analysis of this type of interaction is reported. Strong correlation is observed between the electron density at the H-H bond critical point and the M-H(2) interaction energy. Four coordinate models give the best reproduction of the experimental data, suggesting that the experimental sites are four coordinate. The V-H(2) interaction is shown to be greater when the non-hydrazine based ligand, THF, of the experimental system is altered to a poorer π-acceptor ligand. Upon altering the metal to Ti or Cr the M-H(2) interaction energy changes little but the number of H(2) which may be bound decreases from four (Ti) to two (Cr). It is proposed that changing the metal from V to Ti may increase the hydrogen storage capacity of the experimental system. A 9.9 wt% maximum storage capacity at the ideal binding enthalpy for room temperature performance is predicted when the Ti metal is combined with a coordination sphere containing 2 hydride ligands.