Umaprasana Ojha

Long term in vitro biostability of segmented polyisobutylene-based thermoplastic polyurethanes

Long term in vitro biostability of thermoplastic polyurethanes (TPUs) containing mixed polyisobutylene (PIB)/poly(tetramethylene oxide) (PTMO) soft segment was studied under accelerated conditions in 20% H(2)O(2) solution containing 0.1M CoCl(2) at 50 °C to predict resistance to metal ion oxidative degradation (MIO) in vivo. The PIB-based TPUs showed significant oxidative stability as compared to the commercial controls Pellethane 2363-55D and 2363-80A. After 12 weeks in vitro the PIB-PTMO TPUs with 10-20% PTMO in the soft segment showed 6-10% weight loss whereas the Pellethane TPUs degraded completely in about 9 weeks. Attenuated total reflectance Fourier transform infrared spectroscopy confirmed the degradation of Pellethane samples via MIO by the loss of the ∼1110 cm(-1) aliphatic C-O-C stretching peak height attributed to chain scission, and the appearance of a new peak at ∼1174 cm(-1) attributed to crosslinking. No such changes were apparent in the spectra of the PIB-based TPUs. The PIB-based TPUs exhibited 10-30% drop in tensile strength compared to 100% for the Pellethane TPUs after 12 weeks. The molecular weight of the PIB-based TPUs decreased slightly (10-15%) at 12 weeks. The Pellethane TPUs showed a dramatic decrease in M(n) and an increase in low molecular weight degradation product. Scanning electron microscopy (SEM) showed severe cracking in the Pellethane samples after 2 weeks, whereas the PIB-based TPUs exhibited a continuous surface morphology. The weight loss, tensile, and SEM data correlate well with each other and indicate excellent biostability of these materials.

Surface Characterization and Protein Interactions of Segmented Polyisobutylene-Based Thermoplastic Polyurethanes

The surface properties and biocompatibility of a class of thermoplastic polyurethanes (TPUs) with applications in blood-contacting medical devices have been studied. Thin films of commercial TPUs and novel polyisobutylene (PIB)-poly(tetramethylene oxide) (PTMO) TPUs were characterized by contact angle measurements, X-ray photoelectron spectroscopy, and atomic force microscopy (AFM) imaging. PIB-PTMO TPU surfaces have significantly higher C/N ratios and lower amounts of oxygen than the theoretical bulk composition, which is attributed to surface enrichment of PIB. Greater differences in the C/N ratios were observed with the softer compositions due to their higher relative amounts of PIB. The contact angles were higher on PIB-PTMO TPUs than on commercial polyether TPUs, indicating lower surface energy. AFM imaging showed phase separation and increasing domain sizes with increasing hard segment content. The biocompatibility was investigated by quantifying the adsorption of fouling and passivating proteins, fibrinogen (Fg) and human serum albumin (HSA) respectively, onto thin TPU films spin coated onto the electrode of a quartz crystal microbalance with dissipation monitoring (QCM-D). Competitive adsorption experiments were performed with a mixture of Fg and albumin in physiological ratio followed by binding of GPIIb-IIIa, the platelet receptor ligand that selectively binds to Fg. The QCM-D results indicate similar adsorbed amounts of both Fg and HSA on PIB-PTMO TPUs and commercial TPUs. The strength of the protein interactions with the various TPU surfaces measured with AFM (colloidal probe) was similar among the various TPUs. These results suggest excellent biocompatibility of these novel PIB-PTMO TPUs, similar to that of polyether TPUs.

Synthesis and Characterization of Thermoplastic Polyurethaneureas based on Polyisobutylene and Poly(tetramethylene oxide) Segments

New thermoplastic polyurethaneureas (TPUU) based on polyisobutylene (PIB) and poly(tetramethylene oxide) (PTMO) segments have been synthesized possessing tensile properties comparable to conventional PTMO based TPUs. PIB based TPUU containing 35 weight (wt)% hard segment was synthesized by chain extension of H2N-Allyl-PIB-Allyl-NH2 with 4,4′ -methylene bis(phenylisocyanate) (MDI) and 1,4-butanediol (BDO) in toluene. The ultimate tensile strength (UTS) = 12 MPa and ultimate elongation = 70% were inferior to PTMO based polyurethane (UTS = 35 MPa, elongation at break = 600%). H2N-Allyl-PIB-Allyl-NH2 and HO-PTMO-OH in different proportions were chain extended in presence of MDI and BDO to obtain TPUUs containing 35 wt% hard segment. The polymers exhibited M ns = 84000–138000 with polydispersity indices (PDIs) = 1.7–3.7. The UTS = 23–32 MPa and elongation at break = 250–675% was comparable to that of PTMO based polyurethane and significantly higher than the PIB based TPUU with the same Shore hardness. The Youngs modulus of the polymers was strongly dependent and directly proportional to the PIB wt% in the SS of the TPUUs.

Peptide surface modification of P(HEMA-co-MMA)-b-PIB-b-P(HEMA-co-MMA) block copolymers.

Peptide surface modification of poly[(methyl methacrylate-co-hydroxyethyl methacrylate)-b-isobutylene-b-(methyl methacrylate-co-hydroxyethyl methacrylate)] P(MMA-co-HEMA)-b-PIB-b-P(MMA-co-HEMA) triblock copolymers with different HEMA/MMA ratios has been accomplished using an efficient synthetic procedure. The triblock copolymers were reacted with 4-fluorobenzenesulfonyl chloride (fosyl chloride) in pyridine to obtain the activated polymers [poly{(methyl methacrylate-co-fosyloxyethyl methacrylate)-b-isobutylene-b-(methyl methacrylate-co-fosyloxyethyl methacrylate)}] P(MMA-co-FEMA)-b-PIB-b-P(MMA-co-FEMA), with an activating efficiency of 80-90%. The resulting polymers were soluble in chloroform, and their solutions were used to coat thin uniform films with a predetermined thickness on smooth steel surfaces. The presence of reactive activating groups on the film surface was confirmed by X-ray photoelectron spectroscopy (XPS), dye labeling, and confocal laser scanning microscopic studies. Activation of the triblock copolymer films was also achieved under heterogeneous conditions in polar (acetonitrile) and nonpolar (hexanes) media. The extent of activation was controlled by varying the dipping time and polarity of the medium. Peptide attachment was accomplished by immersing the coated steel strips into aqueous buffer solution of Gly-Gly or GYIGSR. XPS and solubility studies revealed successful attachment of peptides to the polymer surface. Virtually all remaining activating groups were successfully replaced in the subsequent step by a treatment with Tris(hydroxymethyl)amino methane in a buffered methanol/water mixture.

Stilbene-Based Fluorescent Sensor for Detection of Organophosphorus Warfare Nerve Agents

In this paper, we report the synthesis of stilbene-based fluorophore, 3,4-dihydroxy-4′-aminostilbene (DHAS) for the detection of chemical warfare agents such as organophosphorus nerve gases. DHAS was characterized by various spectroscopic methods and grafted on to electrospun nanofibers. The interaction of DHAS with nerve agents simulant, diethyl chlorophosphate (DCP) was investigated in solution and vapor phase by fluorescence spectroscopy.