Umber Cheema

3D tumour models: novel in vitro approaches to cancer studies

Abstract3D in vitro models have been used in cancer research as a compromise between 2-dimensional cultures of isolated cancer cells and the manufactured complexity of xenografts of human cancers in immunocompromised animal hosts. 3D models can be tailored to be biomimetic and accurately recapitulate the native in vivo scenario in which they are found. These 3D in vitro models provide an important alternative to both complex in vivo whole organism approaches, and 2D culture with its spatial limitations. Approaches to create more biomimetic 3D models of cancer include, but are not limited to, (i) providing the appropriate matrix components in a 3D configuration found in vivo, (ii) co-culturing cancer cells, endothelial cells and other associated cells in a spatially relevant manner, (iii) monitoring and controlling hypoxia- to mimic levels found in native tumours and (iv) monitoring the release of angiogenic factors by cancer cells in response to hypoxia. This article aims to overview current 3D in vitro models of cancer and review strategies employed by researchers to tackle these aspects with special reference to recent promising developments, as well as the current limitations of 2D cultures and in vivo models. 3D in vitro models provide an important alternative to both complex in vivo whole organism approaches, and 2D culture with its spatial limitations. Here we review current strategies in the field of modelling cancer, with special reference to advances in complex 3D in vitro models.

Use of multiple unconfined compression for control of collagen gel scaffold density and mechanical properties

Collagen gel is a poroelastic/biphasic system consisting of a fibrillar loose lattice structure filled with >99% fluid. Its mechanical behaviour is governed by the inherent viscoelasticity of the fibrils, and their interaction with the fluid. This study investigated the underlying mechanisms of plastic compression (PC), a recently introduced technique for the production of dense collagen matrices for tissue engineering. Unconfined compressive loading results in the rapid expulsion of the fluid phase to produce scaffolds with improved mechanical properties potentially suitable for direct implantation and suturing. The controllability of the PC, as a single or multi-stage process was investigated in terms of fluid loss, remaining protein concentration, and morphological characteristics. Time dependent analysis, and quasi-static mechanical (compressive and tensile) properties of hyper-hydrated and PC collagen, produced by single (SC) and double (DC) compression, were also investigated on the non-covalently cross-linked gels. Under unconfined compressive creep, the behaviour of hyper hydrated gel was dictated by the fluid movement relative to the solid ( poroelasticity) with negligible recovery upon load removal. Similar behaviour was achieved in multiple compressed gels; however, these progressively dense matrices displayed an instantaneous recovery that was in line with the increase in fibrillar collagen concentration. Under tension, where the mechanical response of the gels is dominated by the fibrils, there was significant increase in both break strength and modulus with increasing fibril concentration due to multiple compression as DC provided greater opportunity for physical interaction between the nano-sized fibrils.

Mechanical signals and IGF-I gene splicing in vitro in relation to development of skeletal muscle

It has been shown that the insulin‐like growth factor (IGF‐I) gene is spliced in response to mechanical signals producing forms of IGF‐I which have different actions. In order to study how mechanical signals influence this gene splicing in developing muscle, C2C12 cells were grown in three‐dimensional (3D) culture and subjected to different regimens of mechanical strain. IGF‐IEa which initiates the fusion of myoblasts to form myotubes was found to be constitutively expressed in myoblasts and myotubes (held under endogenous tension) and its expression upregulated by a single ramp stretch of 1‐h duration but reduced by repeated cyclical stretch. In contrast, mechano growth factor (MGF), which is involved in the proliferation of mononucleated myoblasts that are required for secondary myotube formation and to establish the muscle satellite (stem) cell pool, showed no significant constitutive expression in static cultures, but was upregulated by a single ramp stretch and by cycling loading. The latter types of force simulate those generated in myoblasts by the first contractions of myotubes. These data indicate the importance of seeking to understand the physiological signals that determine the ratios of splice variants of some growth factor/tissue factor genes in the early stages of development of skeletal muscle.

Spatially defined oxygen gradients and vascular endothelial growth factor expression in an engineered 3D cell model

Abstract.Tissue hypoxia results in rapid angiogenesis in vivo, triggered by angiogenic proteins, including vascular endothelial growth factor (VEGF). Current views of tissue viability are founded on whether ‘deeper-lying’ cells receive sufficient nutrients and oxygen for normal activity and ultimately survival. For intact tissues, levels of such essential nutrients are governed by micro-vascular perfusion. However, there have been few effective quantitatively defined 3D models, which enable testing of the interplay or interdependence of matrix and cell density, and path diffusion on oxygen consumption in vitro. As a result, concepts on cell vulnerability to low oxygen levels, together with the nature of cellular responses are ill defined. The present study has adapted a novel, optical fibre-based system for in situ, real-time oxygen monitoring within three-dimensionally-spiralled cellular collagen constructs, which were then unfurled to enable quantitative, spatial measurements of VEGF production in different parts of the same construct exposed to different oxygen levels. A VEGF response was elicited by cells exposed to low oxygen levels (20 mmHg), primarily within the construct core.

A novel tissue engineered three-dimensional in vitro colorectal cancer model.

The interactions of cancer cells within a solid mass with the surrounding reactive stroma are critical for growth and progression. The surrounding vasculature is recruited into the periphery of the growing tumour to supply cancer cells with nutrients and O2. This study focuses on developing a novel three-dimensional (3-D) in vitro biomimetic colorectal cancer model using colorectal cancer cells and connective tissue cells. The 3-D model comprises a dense artificial cancer mass, created by partial plastic compression of collagen type I containing HT29 colorectal cancer cells, nested in a non-dense collagen type I gel populated by fibroblasts and/or endothelial cells. HT29 cells within the dense mass proliferate slower than when cultured in a two-dimensional system. These cells form tumour spheroids which invade the surrounding matrix, away from the hypoxic conditions in the core of the construct, measured using real time O2 probes. This model is also characterized by the release of vascular endothelial growth factor (VEGF) by HT29 cells, mainly at the invading edge of the artificial cancer mass. This characterization is fundamental in establishing a reproducible, complex model that could be used to advance our understanding of cancer pathology and will facilitate therapeutic drug testing.

Oxygen diffusion through collagen scaffolds at defined densities: implications for cell survival in tissue models.

For the success of any biomaterial for tissue engineering, its mechanical properties and ability to support nutrient diffusion will be critical. Collagen scaffolds are ideal candidates, due to their ability to immerse cells in a biomimetic nanofibrous matrix. We have established O2 diffusion coefficients through native, dense collagen scaffolds at two tissue‐like densities, with and without photo‐chemical crosslinking, by adapting an optical fibre‐based system for real‐time core O2 monitoring deep within collagen constructs. Using a Ficks law model, we then derived O2 diffusion coefficients; 4.5 × 10−6 cm2/s for 11% density collagen scaffolds; 1.7 × 10−6 cm2/s for 34% collagen scaffolds; 3.4 × 10−6 cm2/s for photochemically crosslinked collagen scaffolds at 11%. Both O2 diffusion coefficients of the 11% collagen fall within the range of native intestinal submucosa. The high diffusion coefficients of these collagen scaffolds, as well as their material properties, render them viable tissue‐engineering matrices for tissue replacement. Copyright

Evolution of oxygen utilization in multicellular organisms and implications for cell signalling in tissue engineering

Oxygen is one of the critically defining elements resulting in the existence of eukaryotic life on this planet. The rise and fall of this element can be tracked through time and corresponds with the evolution of diverse life forms, development of efficient energy production (oxidative phosphorylation) in single cell organisms, the evolution of multicellular organisms and the regulation of complex cell phenotypes. By understanding these events, we can plot the effect of oxygen on evolution and its direct influence on different forms of life today, from the whole organism to specific cells within multicellular organisms. In the emerging field of tissue engineering, understanding the role of different levels of oxygen for normal cell function as well as control of complex signalling cascades is paramount to effectively build 3D tissues in vitro and their subsequent survival when implanted.

Alignment hierarchies: engineering architecture from the nanometre to the micrometre scale

Natural tissues are built of metabolites, soluble proteins and solid extracellular matrix components (largely fibrils) together with cells. These are configured in highly organized hierarchies of structure across length scales from nanometre to millimetre, with alignments that are dominated by anisotropies in their fibrillar matrix. If we are to successfully engineer tissues, these hierarchies need to be mimicked with an understanding of the interaction between them. In particular, the movement of different elements of the tissue (e.g. molecules, cells and bulk fluids) is controlled by matrix structures at distinct scales. We present three novel systems to introduce alignment of collagen fibrils, cells and growth factor gradients within a three-dimensional collagen scaffold using fluid flow, embossing and layering of construct. Importantly, these can be seen as different parts of the same hierarchy of three-dimensional structure, as they are all formed into dense collagen gels. Fluid flow aligns collagen fibrils at the nanoscale, embossed topographical features provide alignment cues at the microscale and introducing layered configuration to three-dimensional collagen scaffolds provides microscale- and mesoscale-aligned pathways for protein factor delivery as well as barriers to confine protein diffusion to specific spatial directions. These seemingly separate methods can be employed to increase complexity of simple extracellular matrix scaffolds, providing insight into new approaches to directly fabricate complex physical and chemical cues at different hierarchical scales, similar to those in natural tissues.

Fabricating tissues: Analysis of farming versus engineering strategies

Tissue Engineering has expanded rapidly towards target applications of tissue repair and regeneration, whilst generating surprisingly novel models to study tissue modelling. However, clinical success in producing effective engineered tissues such as bone, skin, cartilage, and tendon, have been rare and limited. Problems tend to focus on how to stimulate the replacement of initial scaffold with mechanically functional, native extracellular matrix (principally collagen). Typical approaches have been to develop perfused and mechanically active bioreactors, with the use of native collagen itself as the initial scaffold, though the idea remains that cells do the fabrication (i.e. a cultivation process). We have developed a new, engineering approach, in which the final collagen template is fabricatedwithout cell involvement. The first part of this biomimetic engineering involves a plastic compression of cellular native collagen gels to form dense, strong, collagenous neotissues (in minutes). Further steps can be used to orientate and increase collagen fibril diameter, again by non-cell dependent engineering. This allows operator control of cell or matrix density and material properties (influencing biological half life and fate). In addition, this (non-cultivation) approach can incorporate techniques to generate localised 3D structures and zones at a meso-scale. In conclusion, the use of biomimetic engineering based on native collagen, rather than cell-cultivation approaches for bulk matrix fabrication, produces huge benefits. These include speed of fabrication (minutes instead of weeks and months), possibility of fine control of composition and 3D nano-micro scale structure and biomimetic complexity.

Laminin promotes vascular network formation in 3D in vitro collagen scaffolds by regulating VEGF uptake

Angiogenesis is an essential neovascularisation process, which if recapitulated in 3D in vitro, will provide better understanding of endothelial cell (EC) behaviour. Various cell types and growth factors are involved, with vascular endothelial growth factor (VEGF) and its receptors VEGFR1 and VEGFR2 key components. We were able to control the aggregation pattern of ECs in 3D collagen hydrogels, by varying the matrix composition and/or having a source of cells signalling angiogenic proteins. These aggregation patterns reflect the different developmental pathways that ECs take to form different sized tubular structures. Cultures with added laminin and thus increased expression of α6 integrin showed a significant increase (p<0.05) in VEGFR2 positive ECs and increased VEGF uptake. This resulted in the end-to-end network aggregation of ECs. In cultures without laminin and therefore low α6 integrin expression, VEGFR2 levels and VEGF uptake were significantly lower (p<0.05). These ECs formed contiguous sheets, analogous to the ‘wrapping’ pathway in development. We have identified a key linkage between integrin expression on ECs and their uptake of VEGF, regulated by VEGFR2, resulting in different aggregation patterns in 3D.