Valerie G. Preston

Assembly of Herpes Simplex virus Type 1 Capsids Using a Panel of Recombinant Baculoviruses

Immature or B capsids of herpes simplex virus type 1 (HSV-1) are composed of seven proteins encoded by six viral genes. The proteins encoded by UL18 (VP23), UL19 (VP5), UL35 (VP26) and UL38 (VP19C) are components of the outer capsid shell whereas those specified by UL26 (VP21 and VP24) and UL26.5 (VP22a), are involved in scaffold formation. We have used a panel of recombinant baculoviruses, each expressing one of the capsid protein genes, to examine the requirements for capsid assembly. Coexpression of the six genes in insect cells resulted in the formation of capsids that were indistinguishable in appearance and protein composition from those made during HSV-1 infection of mammalian cells. This demonstrates that the proteins encoded by the known capsid genes contain all the structural information necessary for capsid assembly and that other virus-encoded proteins are not required for this process. Omission of single recombinant baculoviruses from this system allowed the role of individual HSV-1 proteins in capsid assembly to be determined. Thus, capsid assembly did not take place in the absence of VP23, VP5 or VP19C, whereas lack of VP26 had no discernible effect on capsid formation. Capsids assembled in the absence of the UL26 gene products had a large-cored phenotype resembling that previously described for the HSV-1 mutant ts1201 which has a lesion in this gene. Some apparently intact capsid shells were also made in the absence of the major scaffolding protein, VP22a, whereas the omission of both UL26 and UL26.5 resulted in the appearance of large numbers of partial and deformed capsid shells.

The herpes simplex virus UL33 gene product is required for the assembly of full capsids

Phenotypic analysis of the herpes simplex virus type 1 temperature-sensitive DNA-positive mutant, ts1233, revealed that the mutant had a structural defect at the nonpermissive temperature (NPT). Cells infected with ts1233 at the NPT contained large numbers of intermediate capsids, lacking dense cores but possessing some internal structure. No full capsids or enveloped virus particles were detected. In contrast to the defect in another packaging-deficient mutant ts1201, the block in the formation of dense-cored, DNA-containing capsids in ts1233-infected cells at the NPT could not be reversed by transferring the cells to the permissive temperature in the presence of a protein synthesis inhibitor. Furthermore, the capsids produced by ts1233 at the NPT had more compact internal structures than those of the gene UL26 mutant ts1201. Southern blot analysis of viral DNA in ts1233-infected cells confirmed that the mutant DNA was not encapsidated at the NPT and showed that the unpackaged DNA was not cleaved into genome-length molecules. The ts1233 mutation was mapped by marker rescue to the vicinity of genes UL32 and UL33. Sequence analysis of the DNA in this region from the mutant and two independently isolated revertants for growth revealed that ts1233 had a single base-pair change at the amino-terminal end of UL33, resulting in the substitution of an isoleucine with an asparagine. The nucleotide sequence of the revertants in this part of the genome was identical to that of wild-type virus.

Processing of the herpes simplex virus assembly protein ICP35 near its carboxy terminal end requires the product of the whole of the UL26 reading frame.

The herpes simplex virus (HSV) type 1 assembly protein ICP35 consists of a family of polypeptides, ranging in molecular weight from about 45,000-39,000. The lower molecular weight forms of ICP35 are derived from the higher molecular weight species by slow post-translational modification. The reading frame of gene UL26 and the region within this gene which exhibited homology to the cytomegalovirus assembly protein, the analogous protein to ICP35, were expressed separately under immediate-early (IE) gene regulation in a HSV vector containing a temperature-sensitive mutation in the major transcriptional regulator Vmw175. Monoclonal antibody specific for ICP35 immunoprecipitated several polypeptides with molecular weights around 75,000 from extracts of cells infected with a recombinant expressing the IE gene UL26 at the nonpermissive temperature (NPT). These results suggested that the UL26 gene specified a protein distinct from ICP35 but which had some antigenic sites in common with ICP35. In extracts of cells infected at the NPT with a recombinant expressing only the carboxy terminal half of UL26 coding sequences, the monoclonal antibody immunoprecipitated large amounts of the high molecular weight forms of ICP35. The lower molecular weight processed forms of ICP35, however, were not detectable. When cells were coinfected with both recombinants ICP35 was processed to its lower molecular weight forms. This processing step, which occurred near the carboxy terminus of ICP35, was not dependent on capsid formation. The work, together with previous information on the processing of the CMV assembly protein, suggests that UL26 product may be a protease.

Characterisation of a herpes simplex virus type 1 mutant which has a temperature-sensitive defect in penetration of cells and assembly of capsids.

A herpes simplex virus type 1 (HSV-1) mutant, ts1204, which has a temperature-sensitive (ts) mutation located within genome map coordinates 0.318 to 0.324, close to but outside the coding sequences of the glycoprotein gB gene, has been characterised. Although this mutant adsorbed to the cell surface at the nonpermissive temperature (NPT), it failed to penetrate the cell membrane. As a consequence of this defect, high multiplicities of infection of ts1204 blocked subsequent infection of cells by wild-type HSV-1. By contrast, at the NPT, superinfection of cells with HSV-2 was not inhibited by prior infection with ts1204. The penetration defect could be overcome either by brief incubation of mutant virus-infected cells at the permissive temperature, or by treatment of the cells with polyethylene glycol, a compound which promotes fusion of membranes. Upon continued incubation of ts1204-infected cells at the NPT, low numbers of capsids were assembled. Although these capsids all had some internal structure, they did not contain DNA. Another mutant, ts1208, which lies in the same complementation group as ts1204, penetrated cells normally at the NPT, but like ts1204, had a defect in the formation of functional capsids. Evidence presented in this paper suggests that the gene in which the ts1204 and ts1208 lesions map encodes a structural polypeptide.

Localization of the herpes simplex virus type 1 major capsid protein VP5 to the cell nucleus requires the abundant scaffolding protein VP22a

The intracellular distributions of three herpes simplex virus type 1 (HSV-1) capsid proteins, VP23, VP5 and VP22a, were examined using vaccinia virus and plasmid expression systems. During infection of cells with HSV-1 wild-type virus, all three proteins were predominantly located in the nucleus, which is the site of capsid assembly. However, when expressed in the absence of any other HSV-1 proteins, although VP22a was found exclusively in the nucleus as expected, VP5 and VP23 were distributed throughout the cell. Thus nuclear localization is not an intrinsic property of these proteins but must be mediated by one or more HSV-1-induced proteins. Co-expression experiments demonstrated that VP5 was efficiently transported to the nucleus in the presence of VP22a, but the distribution of VP23 was unaffected by the presence of either or both of the other two proteins.

Herpes Simplex Virus Type 1 DNA-Packaging Protein UL17 Is Required for Efficient Binding of UL25 to Capsids

ABSTRACT Herpes simplex virus type 1 packages its DNA genome into a precursor capsid, referred to as the procapsid. Of the three capsid-associated DNA-packaging proteins, UL17, UL25, and UL6, only UL17 and UL6 appear to be components of the procapsid, with UL25 being added subsequently. To determine whether the association of UL17 or UL25 with capsids was dependent on the other two packaging proteins, B capsids, which lack viral DNA but retain the cleaved internal scaffold, were purified from nonpermissive cells infected with UL17, UL25, or UL6 null mutants and compared with wild-type (wt) B capsids. In the absence of UL17, the levels of UL25 in the mutant capsids were much lower than those in wt B capsids. These results suggest that UL17 is required for efficient incorporation of UL25 into B capsids. B capsids lacking UL25 contained about twofold-less UL17 than wt capsids, raising the possibilities that UL25 is important for stabilizing UL17 in capsids and that the two proteins interact in the capsid. The distribution of UL17 and UL25 on B capsids was examined using immunogold labeling. Both proteins appeared to bind to multiple sites on the capsid. The properties of the UL17 and UL25 proteins are consistent with the idea that the two proteins are important in stabilizing capsid-DNA structures rather than having a direct role in DNA packaging.

The products of Herpes Simplex virus type 1 gene UL26 which are involved in DNA packaging are strongly associated with empty but not with full capsids

We report on the properties of a family of related herpes simplex virus type 1 polypeptides (designated p40) of Mr around 40,000. The intracellular localization of these polypeptides has been examined using monoclonal antibodies and their association with viral capsids within the nuclei of infected cells has been demonstrated directly by immunoelectron microscopy. Specific DNA staining and the use of mutants defective for DNA packaging has revealed, in contrast to earlier findings, that p40 is present in empty capsids. Protein p40 is not present as a major component of full capsids or of mature virions indicating that it is transiently associated with capsids and that its removal from capsids is linked with the process of DNA packaging.

Herpes simplex virus type 1 portal protein UL6 interacts with the putative terminase subunits UL15 and UL28.

ABSTRACT The herpes simplex virus type 1 (HSV-1) UL6, UL15, and UL28 proteins are essential for cleavage of replicated concatemeric viral DNA into unit length genomes and their packaging into a preformed icosahedral capsid known as the procapsid. The capsid-associated UL6 DNA-packaging protein is located at a single vertex and is thought to form the portal through which the genome enters the procapsid. The UL15 protein interacts with the UL28 protein, and both are strong candidates for subunits of the viral terminase, a key component of the molecular motor that drives the DNA into the capsid. To investigate the association of the UL6 protein with the UL15 and UL28 proteins, the three proteins were produced in large amounts in insect cells with the baculovirus expression system. Interactions between UL6 and UL28 and between UL6 and UL15 were identified by an immunoprecipitation assay. These results were confirmed by transiently expressing wild-type and mutant proteins in mammalian cells and monitoring their distribution by immunofluorescence. In cells expressing the single proteins, UL6 and UL15 were concentrated in the nuclei whereas UL28 was found in the cytoplasm. When the UL6 and UL28 proteins were coexpressed, UL28 was redistributed to the nuclei, where it colocalized with UL6. In cells producing either of two cytoplasmic UL6 mutant proteins and a functional epitope-tagged form of UL15, the UL15 protein was concentrated with the mutant UL6 protein in the cytoplasm. These observed interactions of UL6 with UL15 and UL28 are likely to be of major importance in establishing a functional DNA-packaging complex at the portal vertex of the HSV-1 capsid.

Mutational Analysis of the Herpes Simplex Virus Type 1 Trans-inducing Factor Vmw65

The herpes simplex virus type 1 (HSV-1) polypeptide Vmw65 is a structural component of the virus particle and is also responsible for trans-induction of immediate early (IE) transcription. Functional domains of this polypeptide were investigated by constructing a series of 10 plasmids each with a 12 bp insertion in the gene encoding Vmw65. Plasmids were analysed for their ability to stimulate IE transcription in short term transfection assays, and the altered Vmw65 polypeptides were assayed for the ability to form an IE-specific protein-DNA complex (IEC) in vitro. A direct correlation was observed between stimulation of transcription and formation of IEC, strongly suggesting that IEC is an important intermediate in transcription activation. Plasmids were also tested for their ability to rescue the temperature-sensitive mutation in the HSV-2 assembly mutant ts2203, since marker rescue analysis indicated that this mutation maps within the gene encoding Vmw65. Five plasmids failed to rescue ts2203, thereby defining regions of Vmw65 required for virus assembly. The results show that distinct domains exist in Vmw65 for activation of transcription and assembly of virus.

Identification of the herpes simplex virus type 1 gene encoding the dUTPase

The dUTPase gene of herpes simplex virus has been identified using a novel approach. The upstream regulatory sequences, or the promoter and upstream regulatory sequences, of the immediate-early gene Vmw175 (ICP4) were inserted in front of genes mapping in the region 0.69 to 0.70 map units of the virus genome to enhance transient gene expression in a transfection assay. One clone, containing a gene specifying a 1.5-kb mRNA, induced significant amounts of virus-specific dUTPase activity. The enzyme activity was abolished by insertion of a HindIII linker into the KpnI site within the coding sequences of this gene. The results show that the enzyme is virus coded and that 1.5-kb mRNA specifies the dUTPase.