Valeska Ting

Structural isotope effects in metal hydrides and deuterides

Historically the extraction of high-quality crystallographic information from inorganic samples having high hydrogen contents, such as metal hydrides, has involved preparing deuterated samples prior to study using neutron powder diffraction. We demonstrate, through direct comparison of the crystal structure refinements of the binary hydrides SrH(2) and BaH(2) with their deuteride analogues at 2 K and as a function of temperature, that precise and accurate structural information can be obtained from rapid data collections from samples containing in excess of 60 at.% hydrogen using modern high-flux, medium resolution, continuous wavelength neutron powder diffraction instruments. Furthermore, observed isotope-effects in the extracted lattice parameters and atomic positions illustrate the importance of investigating compounds in their natural hydrogenous form whenever possible.

Cisplatin: Polymorphism and Structural Insights into an Important Chemotherapeutic Drug

The changing face of cisplatin: The complete crystal structures, including the details of extensive intermolecular hydrogen bonding in two enantiotropic polymorphs of the chemotherapeutic drug cisplatin, have been elucidated. A massive thermal hysteresis effect exists between the two polymorphs, α and β, that are active at ambient temperatures.

Crystallography of hydrogen-containing compounds: realizing the potential of neutron powder diffraction

Hydrogen forms more compounds than any other element in the Periodic Table, yet methods for accurately, precisely and rapidly determining its position in a crystal structure are not readily available. The latest generation of high-flux neutron powder diffractometers, operating under optimised collection geometries, allow hydrogen positions to be extracted from the diffraction patterns of polycrystalline hydrogenous compounds without resorting to isotopic substitution. Neutron powder diffraction for hydrogenous materials has a wide range of applications within chemistry. These include the study of hydrogen-energy materials, coordination and organometallic compounds, hydrogen-bonded structures and ferroelectrics, geomaterials, zeolites and small molecule organics, such as simple sugars and amino acids. The technique is particularly well suited to parametric studies, for example as a function of temperature or pressure, where changes in hydrogen bonding patterns or decompositions involving hydrogen-containing molecules, such as water, are monitored.

Direct Evidence for Solid-like Hydrogen in a Nanoporous Carbon Hydrogen Storage Material at Supercritical Temperatures.

Here we report direct physical evidence that confinement of molecular hydrogen (H2) in an optimized nanoporous carbon results in accumulation of hydrogen with characteristics commensurate with solid H2 at temperatures up to 67 K above the liquid-vapor critical temperature of bulk H2. This extreme densification is attributed to confinement of H2 molecules in the optimally sized micropores, and occurs at pressures as low as 0.02 MPa. The quantities of contained, solid-like H2 increased with pressure and were directly evaluated using in situ inelastic neutron scattering and confirmed by analysis of gas sorption isotherms. The demonstration of the existence of solid-like H2 challenges the existing assumption that supercritical hydrogen confined in nanopores has an upper limit of liquid H2 density. Thus, this insight offers opportunities for the development of more accurate models for the evaluation and design of nanoporous materials for high capacity adsorptive hydrogen storage.

Co-production of bio-oil and propylene through the hydrothermal liquefaction of polyhydroxybutyrate producing cyanobacteria.

A polyhydroxybutyrate (PHB) producing cyanobacteria was converted through hydrothermal liquefaction (HTL) into propylene and a bio-oil suitable for advanced biofuel production. HTL of model compounds demonstrated that in contrast to proteins and carbohydrates, no synergistic effects were detected when converting PHB in the presence of algae. Subsequently, Synechocystis cf. salina, which had accumulated 7.5wt% PHB was converted via HTL (15% dry weight loading, 340°C). The reaction gave an overall propylene yield of 2.6%, higher than that obtained from the model compounds, in addition to a bio-oil with a low nitrogen content of 4.6%. No propylene was recovered from the alternative non-PHB producing cyanobacterial strains screened, suggesting that PHB is the source of propylene. PHB producing microorganisms could therefore be used as a feedstock for a biorefinery to produce polypropylene and advanced biofuels, with the level of propylene being proportional to the accumulated amount of PHB.

Supercritical hydrogen adsorption in nanostructured solids with hydrogen density variation in pores

Experimental excess isotherms for the adsorption of gases in porous solids may be represented by mathematical models that incorporate the total amount of gas within a pore, a quantity which cannot easily be found experimentally but which is important for calculations for many applications, including adsorptive storage. A model that is currently used for hydrogen adsorption in porous solids has been improved to include a more realistic density profile of the gas within the pore, and allows calculation of the total amount of adsorbent. A comparison has been made between different Type I isotherm equations embedded in the model, by examining the quality of the fits to hydrogen isotherms for six different nanoporous materials. A new Type I isotherm equation which has not previously been reported in the literature, the Unilan-b equation, has been derived and has also been included in this comparison study. These results indicate that while some Type I isotherm equations fit certain types of materials better than others, the Tόth equation produces the best overall quality of fit and also provides realistic parameter values when used to analyse hydrogen sorption data for a model carbon adsorbent.

Isosteric enthalpies for hydrogen adsorbed on nanoporous materials at high pressures

A sound understanding of any sorption system requires an accurate determination of the enthalpy of adsorption. This is a fundamental thermodynamic quantity that can be determined from experimental sorption data and its correct calculation is extremely important for heat management in adsorptive gas storage applications. It is especially relevant for hydrogen storage, where porous adsorptive storage is regarded as a competing alternative to more mature storage methods such as liquid hydrogen and compressed gas. Among the most common methods to calculate isosteric enthalpies in the literature are the virial equation and the Clausius–Clapeyron equation. Both methods have drawbacks, for example, the arbitrary number of terms in the virial equation and the assumption of ideal gas behaviour in the Clausius–Clapeyron equation. Although some researchers have calculated isosteric enthalpies of adsorption using excess amounts adsorbed, it is arguably more relevant to applications and may also be more thermodynamically consistent to use absolute amounts adsorbed, since the Gibbs excess is a partition, not a thermodynamic phase. In this paper the isosteric enthalpies of adsorption are calculated using the virial, Clausius–Clapeyron and Clapeyron equations from hydrogen sorption data for two materials—activated carbon AX-21 and metal-organic framework MIL-101. It is shown for these two example materials that the Clausius–Clapeyron equation can only be used at low coverage, since hydrogen’s behaviour deviates from ideal at high pressures. The use of the virial equation for isosteric enthalpies is shown to require care, since it is highly dependent on selecting an appropriate number of parameters. A systematic study on the use of different parameters for the virial was performed and it was shown that, for the AX-21 case, the Clausius–Clapeyron seems to give better approximations to the exact isosteric enthalpies calculated using the Clapeyron equation than the virial equation with 10 variable parameters.

Visible light promoted photocatalytic water oxidation: effect of metal oxide catalyst composition and light intensity

A range of low-cost nanoparticulate mixed transition metal oxides were prepared using a simple methodology and used as catalysts in visible light promoted water oxidations. The effect of catalyst and daylight equivalent light intensities on reaction efficiency in terms of O2 yields, TOF and proton production was determined.

Graphene oxide as a template for a complex functional oxide

We report the first use of graphene oxide (GO) as a sacrificial template for the structural direction of complex oxides. The superconductor yttrium barium copper oxide (YBCO) was used as a quarternary oxide test system, with the GO templates being used to create foams and layered paper-like structures which retained the superconducting properties of YBCO.

Neutron powder diffraction - new opportunities in hydrogen location in molecular and materials structure

The potential of neutron powder diffraction in the location of hydrogen atoms in molecular materials and inorganic-molecular complexes is reviewed. Advances in instrumentation and data collection techniques that have made this field accessible are reviewed, along with a wide range of applications carried out by our collaboration investigating functional materials, hydrogen-containing minerals and molecular compounds. Some of the limitations in this area, particularly for molecular systems, are also addressed.