Vassilia Zorba

Laser Ablation in Analytical Chemistry

In 2002, we wrote an Analytical Chemistry feature article describing the Physics of Laser Ablation in Microchemical Analysis. In line with the theme of the 2002 article, this manuscript discusses current issues in fundamental research, applications based on detecting photons at the ablation site (LIBS and LAMIS) and by collecting particles for excitation in a secondary source (ICP), and directions for the technology.

Laser plasma spectrochemistry

An overview of laser plasma spectrochemistry is presented to demonstrate its wide range of capabilities. Laser plasmas offer the ability to perform elemental, isotopic, molecular, quantitative and qualitative sample analysis with sub-micron spatial resolution, and each feature can be measured at standoff distances. Obviously, these attributes are not all achievable at the same time, but they can be optimized for specific applications. This manuscript gives a sampling (pun intended) of the research in our group that has demonstrated each of these capabilities. Although the technology is commonly referred to as LIBS (laser-induced breakdown spectroscopy), the authors prefer to use laser plasma spectrometry to represent the underlying science.

Superhydrophilic TiO2 surface without photocatalytic activation

Since the discovery of extreme surface wetting phenomenon induced by ultraviolet photocatalysis, TiO2 has become the material of choice for environmental friendly applications such as self-cleaning coatings. Nevertheless, it remains a significant challenge to realize surfaces exhibiting persistent superhydrophilicity but without the need of external stimuli. We report a bioinspired TiO2 nanostructure that shows extreme superhydrophilicity without the need of light activation, and with stability against successive wetting-dewetting cycles. This ultimate TiO2 wetting surface exhibits high transmittance from near ultraviolet to the infrared, thus enabling practical antifogging technologies where transparency is critical.

UV fs–ns double-pulse laser induced breakdown spectroscopy for high spatial resolution chemical analysis

We study the use of an ultraviolet (UV) femtosecond (fs)–nanosecond (ns) double-pulse scheme to improve the analytical capabilities of Laser Induced Breakdown Spectroscopy (LIBS) in the few-micron (<2 μm) spatial resolution regime. We show that a double-pulse orthogonal configuration can enhance the spectral emission intensity by roughly 360 times as compared to a single-fs laser pulse LIBS of silicon (Si). Although the spectral emission lifetime in single-pulse LIBS is less than 20 ns, the second pulse provides signal enhancement hundreds of nanoseconds later, indicating that a significant number of non-radiative species (neutrals and/or particles) exist in these small length-scale plasmas long after the fs-laser pulse is over. The double-pulse configuration is a practical way to improve the limits of detection of LIBS for micron/submicron spatial resolution.

Simultaneous 3-dimensional elemental imaging with LIBS and LA-ICP-MS

Laser Induced Breakdown Spectroscopy (LIBS) and Laser Ablation Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS) are used simultaneously for spatially resolved mapping of major and trace elements and isotopes within a Bastnasite rare earth ore sample. The combination of the two techniques provides complementary measurements for elements that are separately unattainable due to low sensitivity and/or strong interferences. Two dimensional (2D) layer-by-layer mapping, 2D cross-sectional imaging and three-dimensional (3D) volume rendering of elements and isotopes in the Bastnasite matrix are presented. These results pave the way for improved 3D elemental imaging through simultaneously acquired LIBS and LA-ICP-MS measurements.

Ultrafast laser induced breakdown spectroscopy of electrode/electrolyte interfaces

Direct chemical analysis of electrode/electrolyte interfaces can provide critical information on surface phenomena that define and control the performance of Li-based battery systems. In this work, we introduce the use of ex situ femtosecond laser induced breakdown spectroscopy to probe compositional variations within the solid electrolyte interphase (SEI) layer. Nanometer-scale depth resolution was achieved for elemental and molecular depth profiling of SEI layers formed on highly oriented pyrolytic graphite electrodes in an organic carbonate-based electrolyte. This work demonstrates the unique ability of ultrafast laser spectroscopy as a highly versatile, light element-sensitive technique for direct chemical analysis of interfacial layers in electrochemical energy storage systems.

Laser wavelength effects in ultrafast near-field laser nanostructuring of Si

We study the effect of laser wavelength (400 and 800 nm) on the near-field processing of crystalline silicon (Si) in the femtosecond pulse duration regime through subwavelength apertures. Distinct differences in the obtained nanostructures are found in each case both in terms of their physical sizes as well as their structure, which can be tuned between craters and protrusions. A single or a few femtosecond pulses can deliver enough energy on the substrate to induce subdiffraction limited surface modification, which is among the smallest ever reported in subwavelength apertured near-field scanning optical microscope schemes.

Three-dimensional elemental imaging of Li-ion solid-state electrolytes using fs-laser induced breakdown spectroscopy (LIBS)

Direct chemical imaging is critical to understand and control processes that affect the performance and safety of Li-ion batteries. In this work, femtosecond-Laser Induced Breakdown Spectroscopy (fs-LIBS) is introduced for 3D chemical analysis of Li-ion solid state electrolytes in electrochemical energy storage systems. Spatially resolved chemical maps of major and minor elements in solid-state electrolyte Li7La3Zr2O12 (LLZO) samples are presented, with a depth resolution of 700 nm. We implement newly-developed visualization techniques to chemically image the atomic ratio distributions in a LLZO solid state electrolyte matrix. Statistical analysis, 2D layer-by-layer analysis, 2D cross-sectional imaging and 3D reconstruction of atomic ratios are demonstrated for electrolyte samples prepared under different processing conditions. These results explain the differences in the physical properties of the samples not revealed by conventional characterization techniques, and demonstrate the ability of fs-LIBS for direct 3D elemental imaging of Li-ion battery solid-state electrolytes.

Laser Ablation Molecular Isotopic Spectrometry for Molecules Formation Chemistry in Femtosecond-Laser Ablated Plasmas

Recently, laser ablated molecular isotopic spectrometry (LAMIS) has expanded its capability to explore molecules formation mechanism in laser-induced plasma in addition to isotope analysis. LAMIS is a powerful tool for tracking the origination of atoms that is involved in formation of investigated molecules by labeling atoms with their isotopic substitution. The evolutionary formation pathways of organic molecules, especially of C2 dimers and CN radicals, were frequently reported. However, very little is known about the formation pathways for metallic radicals and heterodimers in laser ablated plasma. This research focuses on elucidating the formation pathways of AlO radicals in femtosecond laser ablated plasma from 18O-labeled Al2O3 pellet. Plasmas expanding with strong forward bias in the direction normal to the sample surface were generated in the wake of a weakly ionized channel created by a femtosecond laser. The formation mechanism of AlO and influence of air were investigated with multiple plasma diagnostic methods such as monochromatic fast gating imaging, spatiotemporal resolved optical emission spectroscopy, and LAMIS. An advanced LAMIS fitting procedure was used to deduce the spatiotemporal distributions of Al18O and Al16O number densities and also their ratios. We found that the Al16O/Al18O number density ratio is higher for plasma portion closer to the sample surface, which suggests that chemical reactions between the plasma plume and ambient air are more intense at the tail of the plasma. The results also reveals that direct association of free Al and O atoms is the main mechanism for the formation of AlO at the early stage of the plasma. To the contrast, chemical reactions between plasma materials and ambient oxygen molecules and the isotope exchange effect are the dominant mechanisms of the formation of AlO and evolution of Al16O/Al18O number density ratio at the late stage of the plasma.

Enhanced lithium ion transport in garnet-type solid state electrolytes

Al-substituted Li7La3Zr2O12 samples processed under argon show enhanced Li-ion transport and interfacial properties in symmetrical cells with lithium electrodes, compared to those prepared in air. In particular, the samples prepared under argon have higher ionic conductivities and lower interfacial impedances in symmetrical lithium cells, and show better DC cycling characteristics. The electronic conductivities are also somewhat higher. Pellets subjected to thermal treatment under the two types of atmospheres have different colors but exhibit similar microstructures. X-ray diffraction experiments suggest that there are slight structural differences between the two types of samples, but few dissimilarities were observed in elemental composition, distribution of ions, oxidation states, or bond lengths using laser-induced breakdown spectroscopy (LIBS), x-ray photoelectron spectroscopy (XPS), and extended x-ray absorption fine structure spectroscopy (EXAFS) to analyze the materials. Additionally, there was no evidence that La or Zr were reduced during the processing under Ar. Possible explanations for the improved electrochemical properties of the sample prepared under Ar compared to the one prepared in air include differences in grain boundary chemistries and conductivities and/or a small concentration of oxygen vacancies in the former.