Vehid Salih

Comparison of nanoscale and microscale bioactive glass on the properties of P(3HB)/Bioglass composites.

This study compares the effects of introducing micro (m-BG) and nanoscale (n-BG) bioactive glass particles on the various properties (thermal, mechanical and microstructural) of poly(3hydroxybutyrate) (P(3HB))/bioactive glass composite systems. P(3HB)/bioactive glass composite films with three different concentrations of m-BG and n-BG (10, 20 and 30 wt%, respectively) were prepared by a solvent casting technique. The addition of n-BG particles had a significant stiffening effect on the composites, modulus when compared with m-BG. However, there were no significant differences in the thermal properties of the composites due to the addition of n-BG and m-BG particles. The systematic addition of n-BG particles induced a nanostructured topography on the surface of the composites, which was not visible by SEM in m-BG composites. This surface effect induced by n-BG particles considerably improved the total protein adsorption on the n-BG composites compared to the unfilled polymer and the m-BG composites. A short term in vitro degradation (30 days) study in simulated body fluid (SBF) showed a high level of bioactivity as well as higher water absorption for the P(3HB)/n-BG composites. Furthermore, a cell proliferation study using MG-63 cells demonstrated the good biocompatibility of both types of P(3HB)/bioactive glass composite systems. The results of this investigation confirm that the addition of nanosized bioactive glass particles had a more significant effect on the mechanical and structural properties of a composite system in comparison with microparticles, as well as enhancing protein adsorption, two desirable effects for the application of the composites in tissue engineering.

Osteochondral tissue engineering: scaffolds, stem cells and applications.

Osteochondral tissue engineering has shown an increasing development to provide suitable strategies for the regeneration of damaged cartilage and underlying subchondral bone tissue. For reasons of the limitation in the capacity of articular cartilage to self‐repair, it is essential to develop approaches based on suitable scaffolds made of appropriate engineered biomaterials. The combination of biodegradable polymers and bioactive ceramics in a variety of composite structures is promising in this area, whereby the fabrication methods, associated cells and signalling factors determine the success of the strategies. The objective of this review is to present and discuss approaches being proposed in osteochondral tissue engineering, which are focused on the application of various materials forming bilayered composite scaffolds, including polymers and ceramics, discussing the variety of scaffold designs and fabrication methods being developed. Additionally, cell sources and biological protein incorporation methods are discussed, addressing their interaction with scaffolds and highlighting the potential for creating a new generation of bilayered composite scaffolds that can mimic the native interfacial tissue properties, and are able to adapt to the biological environment.

Development of soluble glasses for biomedical use Part II: The biological response of human osteoblast cell lines to phosphate-based soluble glasses

Soluble glasses are considered to be of potential clinical value in orthopaedic and dental surgery. However, the biological response to these materials is not well understood. To determine the effects of these glasses, two human osteoblast cell lines, MG63 and HOS (TE85), were incubated in vitro in the presence of increasing concentrations of extracts of the glasses. The effects of the extracts on cell growth was measured using the MTT assay and an ELISA assay was used to measure the expression of bone sialoprotein (BSP), osteonectin (ON) and fibronectin (FN), antigens which play a fundamental part in the integrity and function of hard connective tissue. The results showed that the proliferation of the cells was adversely affected only by the more soluble glasses, which also down-regulated the expression of the bone-associated proteins. In contrast, the extract of the glass with the lowest dissolution rate, which contains relatively elevated levels of Ca2+, was found to enhance bone cell growth and antigen expression. These findings suggest that the compositions of these glasses at least partly determine the response of cells and thus, that the glasses could be modified to elicit a more optimal biological response and clinical efficacy.

Bone formation controlled by biologically relevant inorganic ions: role and controlled delivery from phosphate-based glasses.

The role of metal ions in the body and particularly in the formation, regulation and maintenance of bone is only just starting to be unravelled. The role of some ions, such as zinc, is more clearly understood due to its central importance in proteins. However, a whole spectrum of other ions is known to affect bone formation but the exact mechanism is unclear as the effects can be complex, multifactorial and also subtle. Furthermore, a significant number of studies utilise single doses in cell culture medium, whereas the continual, sustained release of an ion may initiate and mediate a completely different response. We have reviewed the role of the most significant ions that are known to play a role in bone formation, namely calcium, zinc, strontium, magnesium, boron, titanium and also phosphate anions as well as copper and its role in angiogenesis, an important process interlinked with osteogenesis. This review will also examine how delivery systems may offer an alternative way of providing sustained release of these ions which may effect and potentiate a more appropriate and rapid tissue response.

Poly(3-hydroxybutyrate) multifunctional composite scaffolds for tissue engineering applications

Poly(3-hydroxybutyrate) (P(3HB)) foams exhibiting highly interconnected porosity (85% porosity) were prepared using a unique combination of solvent casting and particulate leaching techniques by employing commercially available sugar cubes as porogen. Bioactive glass (BG) particles of 45S5 Bioglass grade were introduced in the scaffold microstructure, both in micrometer ((m-BG), <5 microm) and nanometer ((n-BG), 30 nm) sizes. The in vitro bioactivity of the P(3HB)/BG foams was confirmed within 10 days of immersion in simulated body fluid and the foams showed high level of protein adsorption. The foams interconnected porous microstructure proved to be suitable for MG-63 osteoblast cell attachment and proliferation. The foams implanted in rats as subcutaneous implants resulted in a non-toxic and foreign body response after one week of implantation. In addition to showing bioactivity and biocompatibility, the P(3HB)/BG composite foams also exhibited bactericidal properties, which was tested on the growth of Staphylococcus aureus. An attempt was made at developing multifunctional scaffolds by incorporating, in addition to BG, selected concentrations of Vitamin E or/and carbon nanotubes. P(3HB) scaffolds with multifunctionalities (viz. bactericidal, bioactive, electrically conductive, antioxidative behaviour) were thus produced, which paves the way for next generation of advanced scaffolds for bone tissue engineering.

Single-step electrochemical deposition of antimicrobial orthopaedic coatings based on a bioactive glass/chitosan/nano-silver composite system

Composite orthopaedic coatings with antibacterial capability containing chitosan, Bioglass® particles (9.8μm) and silver nanoparticles (Ag-np) were fabricated using a single-step electrophoretic deposition (EPD) technique, and their structural and preliminary in vitro bactericidal and cellular properties were investigated. Stainless steel 316 was used as a standard metallic orthopaedic substrate. The coatings were compared with EPD coatings of chitosan and chitosan/Bioglass®. The ability of chitosan as both a complexing and stabilizing agent was utilized to form uniformly deposited Ag-np. Due to the presence of Bioglass® particles, the coatings were bioactive in terms of forming carbonated hydroxyapatite in simulated body fluid (SBF). Less than 7wt.% of the incorporated silver was released over the course of 28days in SBF and the possibility of manipulating the release rate by varying the deposition order of coating layers was shown. The low released concentration of Ag ions (<2.5ppm) was efficiently antibacterial against Staphyloccocus aureus up to 10days. Although chitosan and chitosan/Bioglass® coating supported proliferation of MG-63 osteoblast-like cells up to 7days of culture, chitosan/Bioglass®/Ag-np coatings containing 342 μg of Ag-np showed cytotoxic effects. This was attributed to the relatively high concentration of Ag-np incorporated in the coatings.

Effect of nanoparticulate bioactive glass particles on bioactivity and cytocompatibility of poly(3-hydroxybutyrate) composites

This work investigated the effect of adding nanoparticulate (29 nm) bioactive glass particles on the bioactivity, degradation and in vitro cytocompatibility of poly(3-hydroxybutyrate) (P(3HB)) composites/nano-sized bioactive glass (n-BG). Two different concentrations (10 and 20 wt %) of nanoscale bioactive glass particles of 45S5 Bioglass composition were used to prepare composite films. Several techniques (Raman spectroscopy, scanning electron microscopy, atomic force microscopy, energy dispersive X-ray) were used to monitor their surface and bioreactivity over a 45-day period of immersion in simulated body fluid (SBF). All results suggested the P(3HB)/n-BG composites to be highly bioactive, confirmed by the formation of hydroxyapatite on material surfaces upon immersion in SBF. The weight loss and water uptake were found to increase on increasing bioactive glass content. Cytocompatibility study (cell proliferation, cell attachment, alkaline phosphatase activity and osteocalcin production) using human MG-63 osteoblast-like cells in osteogenic and non-osteogenic medium showed that the composite substrates are suitable for cell attachment, proliferation and differentiation.

In situ non-invasive spectral discrimination between bone cell phenotypes used in tissue engineering.

Raman micro‐spectroscopy was used to discriminate between different types of bone cells commonly used in tissue engineering of bone, with the aim of developing a method of phenotypic identification and classification. Three types of bone cells were analysed: human primary osteoblasts (HOB), retroviral transfected human alveolar bone cells with SV40 large T antigen (SV40 AB), and osteoblast‐like human osteosarcoma derived MG63 cell line. Unsupervised principal component analysis (PCA) and linear discriminant analysis (LDA) of the Raman spectra succeeded in discriminating the osteosarcoma derived MG63 cells from the non‐tumour cells (HOB and SV40 AB). No significant differences were observed between the Raman spectra of the HOB and SV40 AB cells, confirming the biochemical similarities between the two cell types. Difference spectra between tumour and non‐tumour cells suggested that the spectral discrimination is based on the fact that MG63 osteosarcoma derived cells are characterised by lower concentrations of nucleic acids and higher relative concentrations of proteins compared to the non‐tumour bone cells. A supervised classification model (LDA) was built and showed high cross‐validation sensitivity (100%) and specificity (95%) for discriminating the MG63 cells and the non‐tumour cells, with 96% of the cells being correctly classified either as tumour or non‐tumour derived cells. This study proves the feasibility of using Raman spectroscopy to identify in situ phenotypic differences in living cells.

Neo-intimal development on textured biomaterial surfaces during clinical use of an implantable left ventricular assist device.

Implantable left ventricular assist systems are being developed for long term clinical use. Prototype devices are currently used as extended mechanical bridges to cardiac transplantation. The Thermo Cardiosystems Inc. (TCI) pneumatic pusher plate left ventricular assist device (LVAD) features textured blood contacting surfaces to encourage the formation of an adherent fibrin-cellular coagulum. This serves as the foundation for the development of a neo-intimal lining. The TCI LVAD was implanted in 6 male patients (age range 22-53 years) between 1986 and 1988. The duration of implantation ranged from 1-41 days. No clinical thromboembolic events or pump-related thromboembolism occurred and none was evident at necropsy. The six device linings have been fully evaluated. Explanted devices were free of thrombus and calcification. Lining samples for light and electron microscopy were collected from areas of the diaphragm identical for flex and blood shear conditions and from high and low shear areas on the static housing. Islands of collagenous tissue were deposited on the static housing amongst compact fibrin. By day 13, cells populated the surface of the developing neo-intima overlying the diaphragm. By 41 days, the surface cell density increased and the cells became spindle shaped and relatively orientated in the high shear/flex area. Immunohistochemical techniques suggest that these cells are of mesenchymal origin. Textured blood contacting surfaces appear satisfactory in the preliminary clinical use of this device.

In vitro biocompatibility of 45S5 Bioglass-derived glass-ceramic scaffolds coated with poly(3-hydroxybutyrate).

The aim of this work was to study the in vitro biocompatibility of glass–ceramic scaffolds based on 45S5 Bioglass®, using a human osteosarcoma cell line (HOS‐TE85). The highly porous scaffolds were produced by the foam replication technique. Two different types of scaffolds with different porosities were analysed. They were coated with a biodegradable polymer, poly(3‐hydroxybutyrate) (P(3HB)). The scaffold bioactivity was evaluated by soaking in a simulated body fluid (SBF) for different durations. Compression strength tests were performed before and after immersion in SBF. These experiments showed that the scaffolds are highly bioactive, as after a few days of immersion in SBF a hydroxyapatite‐like layer was formed on the scaffolds surface. It was also observed that P(3HB)‐coated samples exhibited higher values of compression strength than uncoated samples. Biocompatibility assessment was carried out by qualitative evaluation of cell morphology after different culture periods, using scanning electron microscopy, while cell proliferation was determined by using the AlamarBlue™ assay. Alkaline phosphatase (ALP) and osteocalcin (OC) assays were used as quantitative in vitro indicators of osteoblast function. Two different types of medium were used for ALP and OC tests: normal supplemented medium and osteogenic medium. HOS cells were seeded and cultured onto the scaffolds for up to 2 weeks. The AlamarBlue assay showed that cells were able to proliferate and grow on the scaffold surface. After 7 days in culture, the P(3HB)‐coated samples had a higher number of cells on their surfaces than the uncoated samples. Regarding ALP‐ and OC‐specific activity, no significant differences were found between samples with different pore sizes. All scaffolds containing osteogenic medium seemed to have a slightly higher level of ALP and OC concentration. These experiments confirmed that Bioglass®/P(3HB) scaffolds have potential as osteoconductive tissue engineering substrates for maintenance and normal functioning of bone tissue. Copyright