Vera A. Vil

Cross-dehydrogenative coupling for the intermolecular C–O bond formation

Summary The present review summarizes primary publications on the cross-dehydrogenative C–O coupling, with special emphasis on the studies published after 2000. The starting compound, which donates a carbon atom for the formation of a new C–O bond, is called the CH-reagent or the C-reagent, and the compound, an oxygen atom of which is involved in the new bond, is called the OH-reagent or the O-reagent. Alcohols and carboxylic acids are most commonly used as O-reagents; hydroxylamine derivatives, hydroperoxides, and sulfonic acids are employed less often. The cross-dehydrogenative C–O coupling reactions are carried out using different C-reagents, such as compounds containing directing functional groups (amide, heteroaromatic, oxime, and so on) and compounds with activated C–H bonds (aldehydes, alcohols, ketones, ethers, amines, amides, compounds containing the benzyl, allyl, or propargyl moiety). An analysis of the published data showed that the principles at the basis of a particular cross-dehydrogenative C–O coupling reaction are dictated mainly by the nature of the C-reagent. Hence, in the present review the data are classified according to the structures of C-reagents, and, in the second place, according to the type of oxidative systems. Besides the typical cross-dehydrogenative coupling reactions of CH- and OH-reagents, closely related C–H activation processes involving intermolecular C–O bond formation are discussed: acyloxylation reactions with ArI(O2CR)2 reagents and generation of O-reagents in situ from C-reagents (methylarenes, aldehydes, etc.).

Synthesis of five- and six-membered cyclic organic peroxides: Key transformations into peroxide ring-retaining products

Summary The present review describes the current status of synthetic five and six-membered cyclic peroxides such as 1,2-dioxolanes, 1,2,4-trioxolanes (ozonides), 1,2-dioxanes, 1,2-dioxenes, 1,2,4-trioxanes, and 1,2,4,5-tetraoxanes. The literature from 2000 onwards is surveyed to provide an update on synthesis of cyclic peroxides. The indicated period of time is, on the whole, characterized by the development of new efficient and scale-up methods for the preparation of these cyclic compounds. It was shown that cyclic peroxides remain unchanged throughout the course of a wide range of fundamental organic reactions. Due to these properties, the molecular structures can be greatly modified to give peroxide ring-retaining products. The chemistry of cyclic peroxides has attracted considerable attention, because these compounds are used in medicine for the design of antimalarial, antihelminthic, and antitumor agents.

Rearrangements of organic peroxides and related processes

Summary This review is the first to collate and summarize main data on named and unnamed rearrangement reactions of peroxides. It should be noted, that in the chemistry of peroxides two types of processes are considered under the term rearrangements. These are conventional rearrangements occurring with the retention of the molecular weight and transformations of one of the peroxide moieties after O–O-bond cleavage. Detailed information about the Baeyer−Villiger, Criegee, Hock, Kornblum−DeLaMare, Dakin, Elbs, Schenck, Smith, Wieland, and Story reactions is given. Unnamed rearrangements of organic peroxides and related processes are also analyzed. The rearrangements and related processes of important natural and synthetic peroxides are discussed separately.

Lanthanide-Catalyzed Oxyfunctionalization of 1,3-Diketones, Acetoacetic Esters, And Malonates by Oxidative C–O Coupling with Malonyl Peroxides

The lanthanide-catalyzed oxidative C-O coupling of 1,3-dicarbonyl compounds with diacyl peroxides, specifically the cyclic malonyl peroxides, has been developed. An important feature of this new reaction concerns the advantageous role of the peroxide acting both as oxidant and reagent for C-O coupling. It is shown that lanthanide salts may be used in combination with peroxides for selective oxidative transformations. The vast range of lanthanide salts (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Y) catalyzes oxidative C-O coupling much more efficiently than other used Lewis and Bronsted acids. This oxidative cross-coupling protocol furnishes mono and double C-O coupling products chemo-selectively in high yields with a broad substrate scope. The double C-O coupling products may be hydrolyzed to vicinal tricarbonyl compounds, which are otherwise cumbersome to prepare. Based on the present experimental results, a nucleophilic substitution mechanism is proposed for the C-O coupling process in which the lanthanide metal ion serves as Lewis acid to activate the enol of the 1,3-dicarbonyl substrate. The side reactions-chlorination and hydroxylation of the 1,3-dicarbonyl partners-may be minimized under proper conditions.

Approach for the Preparation of Various Classes of Peroxides Based on the Reaction of Triketones with H2O2: First Examples of Ozonide Rearrangements

The reaction of β,δ-triketones with an ethereal solution of H2O2 catalyzed by heteropoly acids in the presence of a polar aprotic co-solvent proceeds via three pathways to form three classes of peroxides: tricyclic monoperoxides, bridged tetraoxanes, and a pair of stereoisomeric ozonides. The reaction is unusual in that produces bridged tetraoxanes and ozonides with one of the three carbonyl groups remaining intact. In the synthesis of bridged tetraoxanes, the peroxide ring is formed by the reaction of hydrogen peroxide with two carbonyl groups at the β positions. The synthesis of ozonides from ketones and hydrogen peroxide is a unique process in which the ozonide ring is formed with the participation of two carbonyl groups at the δ positions. Rearrangements of ozonides were found for the first time after more than one century of their active investigation. Ozonides are interconverted with each other and rearranged into tricyclic monoperoxides, whereas ozonides and tricyclic monoperoxides are transformed into bridged tetraoxanes. The individual reaction products were isolated by column chromatography and characterized by NMR spectroscopy, mass spectrometry, and elemental analysis. One representative of each class of peroxides was characterized by X-ray diffraction.

Synthetic Strategies for Peroxide Ring Construction in Artemisinin

The present review summarizes publications on the artemisinin peroxide fragment synthesis from 1983 to 2016. The data are classified according to the structures of a precursor used in the key peroxidation step of artemisinin peroxide cycle synthesis. The first part of the review comprises the construction of artemisinin peroxide fragment in total syntheses, in which peroxide artemisinin ring resulted from reactions of unsaturated keto derivatives with singlet oxygen or ozone. In the second part, the methods of artemisinin synthesis based on transformations of dihydroartemisinic acid are highlighted.

Preparation of a microsized cerium chloride-based catalyst and its application in the Michael addition of β-diketones to vinyl ketones

A facile method, which does not require special equipment, was developed for the preparation of microsized cerium chloride by the thermal treatment of CeCl3·7H2O or the evaporation of its alcoholic solutions. The way of the preparation of the cerium chloride-based catalyst plays a decisive role in its catalytic activity. This catalyst is efficient in the Michael addition of β-diketones to vinyl ketones giving β,δ-triketones.

Peroxides with Anthelmintic, Antiprotozoal, Fungicidal and Antiviral Bioactivity: Properties, Synthesis and Reactions

The biological activity of organic peroxides is usually associated with the antimalarial properties of artemisinin and its derivatives. However, the analysis of published data indicates that organic peroxides exhibit a variety of biological activity, which is still being given insufficient attention. In the present review, we deal with natural, semi-synthetic and synthetic peroxides exhibiting anthelmintic, antiprotozoal, fungicidal, antiviral and other activities that have not been described in detail earlier. The review is mainly concerned with the development of methods for the synthesis of biologically active natural peroxides, as well as its isolation from natural sources and the modification of natural peroxides. In addition, much attention is paid to the substantially cheaper biologically active synthetic peroxides. The present review summarizes 217 publications mainly from 2000 onwards.

Peroxidation of β-diketones and β-keto esters with tert-butyl hydroperoxide in the presence of Cu(ClO4)2/SiO2

Reactions of β-diketones and β-keto esters with tert-butyl hydroperoxide under heterogeneous conditions using SiO2-supported copper(II) perchlorate as a catalyst give rise to α-peroxidation products in 65—82% yields. A possibility to reuse the catalyst was demonstrated.

Synthesis of dibromo ketones by the reaction of the environmentally benign H2O2-HBr system with oximes

AbstractIt was found that oximes undergo deoximation in the presence of the H2O2aq-HBraq system to form ketones and bromo ketones. This reaction provided the basis for the synthesis of dibromo ketones in yields varying from 40% to 94%. This method is environmentally friendly, sustainable, and easy to perform. The results of this investigation extend the potential of the use of oximes for the protection of carbonyl group, thus offering the ability to perform not only conventional deoximation but also the subsequent bromination of ketones. The reaction is easily scaled up and dibromo ketones can be prepared in gram amounts.