Vesna Srot

Toughening through nature-adapted nanoscale design

The extraordinary combination of strength and toughness attained by natures highly sophisticated structural design in nacre has inspired the synthesis of novel nanocomposites. In this context, the organic-inorganic hierarchical design of nacre has been mimicked. However, two key features of nacre, namely the scaling of the structural components and the low content of the organic phase, have not been replicated yet. Here, we present thin nanocomposite films with properly adjusted thicknesses of the organic and inorganic layers, as well as a microstructure that closely resembles that of nacre. These films, which are obtained by the combination of low-temperature chemical bath deposition of titania with layer-by-layer assembly of polyelectrolytes, exhibit enhancement in a fracture toughness by a factor of 4, combined with notable increase in hardness, while the Youngs modulus is largely preserved in comparison to the single titania layer. Our findings highlight the significance of the 10:1 inorganic/organic layer thickness ratio evolved by nature, and provide novel perspectives for the future development of efficient bioinspired thin films.

Band-gap measurements of direct and indirect semiconductors using monochromated electrons

With the development of monochromators for transmission electron microscopes, valence electron-energy-loss spectroscopy (VEELS) has become a powerful technique to study the band structure of materials with high spatial resolution. However, artifacts such as Cerenkov radiation pose a limit for interpretation of the low-loss spectra. In order to reveal the exact band-gap onset using the VEELS method, semiconductors with direct and indirect band-gap transitions have to be treated differently. For direct semiconductors, spectra acquired at thin regions can efficiently minimize the Cerenkov effects. Examples of hexagonal GaN (h-GaN) spectra acquired at different thickness showed that a correct band-gap onset value can be obtained for sample thicknesses up to 0.5 t/{lambda}. In addition, {omega}-q maps acquired at different specimen thicknesses confirm the thickness dependency of Cerenkov losses. For indirect semiconductors, the correct band-gap onset can be obtained in the dark-field mode when the required momentum transfer for indirect transition is satisfied. Dark-field VEEL spectroscopy using a star-shaped entrance aperture provides a way of removing Cerenkov effects in diffraction mode. Examples of Si spectra acquired by displacing the objective aperture revealed the exact indirect transition gap E{sub g} of 1.1 eV.

Structure of sputtered nanocomposite CrCx∕a-C:H thin films

This work presents the structural evolution of nanocomposite CrCx∕a-C:H coatings prepared by unbalanced magnetron sputtering of a metallic Cr target in Ar+CH4 glow discharges using low negative dc bias voltages. Raman spectroscopy and x-ray photoelectron spectroscopy were used to characterize the phase composition and the chemical bonding in the films deposited at different experimental conditions. The results were correlated to the chemical composition obtained by elastic recoil detection analysis. The coating microstructure was investigated on selected samples by high-resolution transmission electron microscopy combined with electron energy-loss spectroscopy analysis. The nanocomposite coatings can be divided into hard CrCx dominated films, when prepared at low CH4 partial pressure to total pressure (pt) ratios (pCH4∕pt 0.4. The structure of the low-friction a-C:H dominated coatings consists of 2–10nm sized fcc CrC crystallites ...

Au−Ag hybrid nanoparticle patterns of tunable size and density on glass and polymeric supports

This paper describes a method to pattern surfaces with Au-Ag hybrid nanoparticles. We used block copolymer micelle lithography of Au nanoparticles and electroless deposition of Ag. The combination of these two methods enables independent tuning of nanoparticle spacing and Ag-shell size. For this purpose, 8 nm large patterned Au nanoparticle seeds served as nuclei for the electroless deposition of silver that is based on a modified Tollens process with glucose. By adjusting the reaction conditions, specific growth of Ag on top of the Au seeds has been accomplished and analyzed by SEM, HRTEM, XEDS, and UV-vis spectroscopy. We could show that this versatile and green method is feasible on glass as well as on biomedical-relevant polymers like poly(ethylene glycol) hydrogels and amorphous Teflon. In conclusion, this method provides a new route to pattern glass and polymeric surfaces with Au-Ag hybrid nanoparticles. It will have many uses in applications such as surface enhanced Raman spectroscopy (SERS) or antimicrobial coatings for which hybrid nanoparticle density, size, and morphology are important.

Mapping of valence energy losses via energy-filtered annular dark-field scanning transmission electron microscopy

The advent of electron monochromators has opened new perspectives on electron energy-loss spectroscopy at low energy losses, including phenomena such as surface plasmon resonances or electron transitions from the valence to the conduction band. In this paper, we report first results making use of the combination of an energy filter and a post-filter annular dark-field detector. This instrumental design allows us to obtain energy-filtered (i.e. inelastic) annular dark-field images in scanning transmission electron microscopy of the 2-dimensional semiconductor band-gap distribution of a GaN/Al(45)Ga(55)N structure and of surface plasmon resonances of silver nanoprisms. In comparison to other approaches, the technique is less prone to inelastic delocalization and relativistic artefacts. The mixed contribution of elastic and inelastic contrast is discussed.

DNA-templated synthesis of ZnO thin layers and nanowires

In this paper, we report a novel synthetic approach towards electrically conductive ZnO nanowires close to ambient conditions using lambda-DNA as a template. Initially, the suitability of DNA to assemble ZnO nanocrystals into thin coatings was investigated. The ZnO nanowires formed on stretched and aligned lambda-DNA molecules were prepared via chemical bath deposition (CBD) of zinc acetate in methanol solution in the presence of polyvinylpyrrolidone (PVP). After 10 deposition cycles, the nanowires exceed 10 microm in length and the height can be varied from 12 to around 40 nm. The nanocrystalline structure of the ZnO wires was confirmed by high-resolution transmission electron microscopy (HRTEM). The electrical conductivity was found to be of the order of several Omega cm at room temperature in two terminal measurements.

Stacking faults and twin boundaries in sphalerite crystals from the Trepča mines in Kosovo

Abstract The structure and chemistry of {111} twin boundaries and stacking faults in Fe-rich sphalerite crystals from the Trepča mines in Kosovo were studied using electron microscopy. The {111} twin boundaries were found to be deficient in S and enriched in O, Mn, Fe, and Cu. The deficiency in S is compensated with O, which is responsible for stabilizing the hexagonal stacking of the fault structures and the formation of {111} twin boundaries in sphalerite. Comparing the intensities of Bijvoet-related reflections we show that there is no inversion of the polar axis across the twin boundaries. In addition to twin boundaries we found two types of stacking faults with RSF1 = 1/3·[1̄12] and RSF2 = 2/3·[1̄12]. The excretion of isostructural copper from the sphalerite crystals peaks at the twin boundaries until it precipitates in the form of small chalcopyrite grains, aligned along the {111} twin boundaries.

Cerium reduction at the interface between ceria and yttria-stabilised zirconia and implications for interfacial oxygen non-stoichiometry

Epitaxial CeO2 films with different thickness were grown on Y2O3 stabilised Zirconia substrates. Reduction of cerium ions at the interface between CeO2 films and yttria stabilised zirconia substrates is demonstrated using aberration-corrected scanning transmission electron microscopy combined with electron energy-loss spectroscopy. It is revealed that most of the Ce ions were reduced from Ce4+ to Ce3+ at the interface region with a decay of several nanometers. Several possibilities of charge compensations are discussed. Irrespective of the details, such local non-stoichiometries are crucial not only for understanding charge transport in such hetero-structures but also for understanding ceria catalytic properties.

Linking Microstructure and Nanochemistry in Human Dental Tissues

Mineralized dental tissues and dental pulp were characterized using advanced analytical transmission electron microscopy (TEM) methods. Quantitative X-ray energy dispersive spectroscopy was employed to determine the Ca/P and Mg/P concentration ratios. Significantly lower Ca/P concentration ratios were measured in peritubular dentine compared to intertubular dentine, which is accompanied by higher and variable Mg/P concentration ratios. There is strong evidence that magnesium is partially substituting calcium in the hydroxyapatite structure. Electron energy-loss near-edge structures (ELNES) of C-K and O-K from enamel and dentine are noticeably different. We observe a strong influence of beam damage on mineralized dental tissues and dental pulp, causing changes of the composition and consequently also differences in the ELNES. In this article, the importance of TEM sample preparation and specimen damage through electron irradiation is demonstrated.

Transmission electron microscopy study of the intermixing of Fe–Pt multilayers

Multilayers composed of 5×(6.4nmFe∕5.6nmPt) were annealed at temperatures up to 735°C. The intermixing was analyzed by analytical and high-resolution transmission electron microscopy. Intermixing and full ordering to the L10 structure was completed after annealing at 735°C. The temperature dependence of intermixing is best described by a three-step process including diffusion through diluted alloys during initial intermixing (400–500°C), diffusion through L12-ordered alloys (around 600°C), and diffusion in the final L10-ordered film above 700°C.