Víctor Hernández

Impact of Perfluorination on the Charge-Transport Parameters of Oligoacene Crystals

The charge-transport parameters of the perfluoropentacene and perfluorotetracene crystals are studied with a joint experimental and theoretical approach that combines gas-phase ultraviolet photoelectron spectroscopy and density functional theory. To gain a better understanding of the role of perfluorination, the results for perfluoropentacene and perfluorotetracene are compared to those for their parent oligoacenes, that is, pentacene and tetracene. Perfluorination is calculated to increase the ionization potentials and electron affinities by approximately 1 eV, which is expected to reduce significantly the injection barrier for electrons in organic electronics devices. Perfluorination also leads to significant changes in the crystalline packing, which greatly affects the electronic properties of the crystals and their charge-transport characteristics. The calculations predict large conduction and valence bandwidths and low hole and electron effective masses in the perfluoroacene crystals, with the largest mobilities expected along the pi-stacks. Perfluorination impacts as well both local and nonlocal vibrational couplings, whose strengths increase by a factor of about 2 with respect to the parent compounds.

Electronic and dynamical effects from the unusual features of the Raman spectra of oligo and polythiophenes

Abstract A comprehensive search for structure/property correlations in the Raman spectra of oligo and polythiophenes is carried out for many homologous series of oligothiophenes (approximately 50 compounds). The observed spectroscopic features are interpreted, with the help also of ab initio calculations, on the basis of the theories currently adopted for the understanding of the properties of polyconjugated materials. From the analysis of the vibrational spectra the behavior of π electrons as function of conjugation length (electron–phonon coupling, pinning, effective electronegativity of the heteroatoms, etc.) is discussed and frequency and intensity correlations useful in chemical diagnosis are proposed.

Quinoidal Oligothiophenes: Towards Biradical Ground‐State Species

A family of quinoidal oligothiophenes, from the dimer to the hexamer, with fused bis(butoxymethyl)cyclopentane groups has been extensively investigated by means of electronic and vibrational spectroscopy, electrochemical measurements, and density functional calculations. The latter predict that the electronic ground state always corresponds to a singlet state and that, for the longest oligomers, this state has biradical character that increases with increasing oligomer length. The shortest oligomers display closed-shell quinoidal structures. Calculations also predict the existence of very low energy excited triplet states that can be populated at room temperature. Aromatization of the conjugated carbon backbone is the driving force that determines the increasing biradical character of the ground state and the appearance of low-lying triplet states. UV/Vis, Raman, IR, and electrochemical experiments support the aromatic biradical structures predicted for the ground state of the longest oligomers and reveal that population of the low-lying triplet state accounts for the magnetic activity displayed by these compounds.

FT-Raman Studies of Charged Defects Created on Methyl End-Capped Oligothiophenes by Doping with NOBF4**

3+ . In the present work, the bpy concentration was always 0.1 M and the lanthanide ion concentration was 0.02 M. Sol-gel matrices containing PEG and luminophores were created as fol- lows: TMOS was partially hydrolyzed by mixing with acidified water (HCl, pH 3.0) at a molar ratio of 1:2 (14). The mixture was continuously stirred for 1 h. At first it was turbid, but in the course of hydrolysis it became clear. Then 1 mL of this original sol was combined with 5 mL of the PEG solution. The mixture was stirred for a further 30 min, poured into PMMA cuvettes, covered with perforated aluminum foil, and left to dry at 50 C. The gel was ready after about 1 week. When the mixture is still fluid, thin films can also be made by dip-coating. Absorption spectra were made using a Cary 1E spectrophotometer; the luminescence spectra were made with a home-assembled spectrofluorom- eter using Oriel parts and employing a 150 W Xe lamp. All measurements were made under ambient conditions.

Optimized protocol for on-target phosphopeptide enrichment prior to matrix-assisted laser desorption-ionization mass spectrometry using mesoporous titanium dioxide.

A novel on-target phosphopeptide enrichment method is presented that allows specific enrichment and direct analysis by matrix assisted laser desorption-ionization mass spectrometry (MALDI-MS) of phosphorylated peptides. Spots consisting of a thin film of anatase titanium dioxide are sintered onto a conductive glass surface. Enrichment and analysis can be performed on the modified target with minimal sample handling. The protocol leads to an enrichment efficiency that is superior to what has been reported before for similar methods. The method was tested using beta-casein as a model phosphorylated protein as well as with a custom peptide mixed with its phosphorylated form. A very low detection limit, a significantly improved phosphoprofiling capability, and a simple experimental approach provide a powerful tool for the enrichment, detection, and analysis of phosphopeptides.

Mesoporous TiO2-Based Experimental Layout for On-Target Enrichment and Separation of Multi- and Monophosphorylated Peptides Prior to Analysis with Matrix-Assisted Laser Desorption-Ionization Mass Spectrometry

A simple method for on-target enrichment and subsequent separation and analysis of phosphorylated peptides is presented. The tryptic digest of a phosphorylated protein, in this case β-casein, is loaded onto a spot on a thin stripe made of mesoporous TiO(2) sintered onto a conductive glass surface. After washing with a salicylic buffer in order to remove the nonphosphorylated peptides, the stripe is placed in an elution chamber containing a phosphate solution. In a way analogous to thin layer chromatography (TLC), the phosphate solution acts as an eluent, clearly separating multi- and monophosphorylated peptides. By performing matrix-assisted laser desorption-ionization mass spectrometry (MALDI-MS) along the stripe, the detection of all phosphorylated peptides present in the digest is facilitated, as they are isolated from each other. The method was also tested on commercial drinking milk, achieving successful separation between multi- and monophosphorylated peptides, as well as a detection limit in the femtomole range. As the enrichment, separation, and analysis take place in the same substrate, sample handling and risk of contamination and sample loss is minimized. The results obtained suggest that the method, once optimized, may successfully provide a complete phosphoproteome.

The lipid composition determines the kinetics of adhesion and spreading of liposomes on mercury electrodes

The dependence of membrane properties on their composition was studied by following the adhesion and spreading of unilamellar and multilamellar liposomes on static mercury electrodes with the help of chronoamperometry. The analysis of the peak-shaped signals allows determining the kinetic parameters of the three-step adhesion-spreading process. The presence of cholesterol in the membrane stabilizes the bilayer in the liquid-crystalline phase, and destabilizes the gel phase. The kinetic parameters also show the effect of superlattice formation in the DMPC-cholesterol system. The detergent triton X-100 is only incorporated in the liquid-crystalline DMPC membranes, and it is expelled to the solution when the membrane is transformed to the gel phase. In the liquid-crystalline membrane, it enhances the adhesion-spreading of liposomes on mercury. The lytic peptides mastoparan X and melittin affect the adhesion-spreading in a similar manner. For the rupture-spreading step, their effect is explained by pore formation. The results obtained with lecithins of different length suggest that the bilayer opening process has much in common with flip-flop translocations. For this process the activation energies were found to be independent of the chain length of the lecithin molecules, while the preexponential factor in the Arrhenius equation decreases drastically for longer chains.

α-Oligofurans show a sizeable extent of π-conjugation as probed by Raman spectroscopy

A Raman spectroscopic analysis revealed that π-conjugation does not reach saturation at least up to the octamer in long α-oligofurans and spreads over 14-15 furan units in the polyfuran. Comparing DFT calculations with experimental results suggests that a considerable amount of HF exchange is required to reproduce computationally the observed conjugation.

The adhesion and spreading of thrombocyte vesicles on electrode surfaces

The interaction of thrombocyte vesicles with the surface of metal electrodes, i.e., mercury, gold and gold electrodes modified with self assembled monolayers (SAM), was studied with the help of chronoamperometry, atomic force microscopy, and quartz crystal microbalance measurements. The experimental results show that the interaction of the thrombocyte vesicles with the surface of the electrodes depends on the hydrophobicity of the latter: whereas on very hydrophobic surfaces (mercury and gold functionalized with SAM) the thrombocyte vesicles disintegrate and form a monolayer of lipids, on the less hydrophobic gold surface a bilayer is formed. The chronoamperometric measurements indicate the possibility of future applications to probe membrane properties of thrombocytes.

Neutral and oxidized triisopropylsilyl end-capped oligothienoacenes: A combined electrochemical, spectroscopic, and theoretical study

This work presents an analysis of the structural, electrochemical, and optical properties of a family of triisopropylsilyl end-capped oligothienoacenes (TIPS-Tn-TIPS, n=4-8) by combining cyclic voltammetry, spectroscopic techniques, and quantum-chemical calculations. TIPS-Tn-TIPS compounds form stable radical cations, and dications are only obtained for the longest oligomers (n=7 and 8). Oxidation leads to the quinoidization of the conjugated backbone, from which electrons are mainly extracted. The absorption and fluorescence spectra show partially resolved vibronic structures even at room temperature, due to the rigid molecular geometry. Two well-resolved vibronic progressions are observed at low temperatures due to the vibronic coupling, with normal modes showing wavenumbers of approximately 1525 and approximately 480 cm(-1). Optical absorption bands display remarkable bathochromic dispersion with the oligomer length, indicative of the extent of pi conjugation. The optical properties of the oxidized compounds are characterized by in situ UV/Vis/NIR spectroelectrochemistry. The radical cation species show two intense absorption bands emerging at energies lower than in the neutral compounds. The formation of the dication is only detected for the heptamer and the octamer, and shows a new band at intermediate energies. Optical data are interpreted with the help of density functional theory calculations performed at the B3LYP/6-31G** level, both for the neutral and the oxidized compounds.