Victor Malka

A laser-plasma accelerator producing monoenergetic electron beams

Particle accelerators are used in a wide variety of fields, ranging from medicine and biology to high-energy physics. The accelerating fields in conventional accelerators are limited to a few tens of MeV m-1, owing to material breakdown at the walls of the structure. Thus, the production of energetic particle beams currently requires large-scale accelerators and expensive infrastructures. Laser–plasma accelerators have been proposed as a next generation of compact accelerators because of the huge electric fields they can sustain (>100 GeV m-1). However, it has been difficult to use them efficiently for applications because they have produced poor-quality particle beams with large energy spreads, owing to a randomization of electrons in phase space. Here we demonstrate that this randomization can be suppressed and that the quality of the electron beams can be dramatically enhanced. Within a length of 3 mm, the laser drives a plasma bubble that traps and accelerates plasma electrons. The resulting electron beam is extremely collimated and quasi-monoenergetic, with a high charge of 0.5 nC at 170 MeV.

Controlled injection and acceleration of electrons in plasma wakefields by colliding laser pulses.

In laser-plasma-based accelerators, an intense laser pulse drives a large electric field (the wakefield) which accelerates particles to high energies in distances much shorter than in conventional accelerators. These high acceleration gradients, of a few hundreds of gigavolts per metre, hold the promise of compact high-energy particle accelerators. Recently, several experiments have shown that laser-plasma accelerators can produce high-quality electron beams, with quasi-monoenergetic energy distributions at the 100 MeV level. However, these beams do not have the stability and reproducibility that are required for applications. This is because the mechanism responsible for injecting electrons into the wakefield is based on highly nonlinear phenomena, and is therefore hard to control. Here we demonstrate that the injection and subsequent acceleration of electrons can be controlled by using a second laser pulse. The collision of the two laser pulses provides a pre-acceleration stage which provokes the injection of electrons into the wakefield. The experimental results show that the electron beams obtained in this manner are collimated (5 mrad divergence), monoenergetic (with energy spread <10 per cent), tuneable (between 15 and 250 MeV) and, most importantly, stable. In addition, the experimental observations are compatible with electron bunch durations shorter than 10 fs. We anticipate that this stable and compact electron source will have a strong impact on applications requiring short bunches, such as the femtolysis of water, or high stability, such as radiotherapy with high-energy electrons or radiography for materials science.

Femtosecond x rays from laser-plasma accelerators

Relativistic interaction of short-pulse lasers with underdense plasmas has recently led to the emergence of a novel generation of femtosecond x-ray sources. Based on radiation from electrons accelerated in plasma, these sources have the common properties to be compact and to deliver collimated, incoherent, and femtosecond radiation. In this article, within a unified formalism, the betatron radiation of trapped and accelerated electrons in the so-called bubble regime, the synchrotron radiation of laser-accelerated electrons in usual meter-scale undulators, the nonlinear Thomson scattering from relativistic electrons oscillating in an intense laser field, and the Thomson backscattered radiation of a laser beam by laser-accelerated electrons are reviewed. The underlying physics is presented using ideal models, the relevant parameters are defined, and analytical expressions providing the features of the sources are given. Numerical simulations and a summary of recent experimental results on the different mechanisms are also presented. Each section ends with the foreseen development of each scheme. Finally, one of the most promising applications of laser-plasma accelerators is discussed: the realization of a compact free-electron laser in the x-ray range of the spectrum. In the conclusion, the relevant parameters characterizing each sources are summarized. Considering typical laser-plasma interaction parameters obtained with currently available lasers, examples of the source features are given. The sources are then compared to each other in order to define their field of applications.

All-optical Compton gamma-ray source

Scientists demonstrate a Compton-based electromagnetic source based on a laser-plasma accelerator and a plasma mirror. The source generates a broadband spectrum of X-rays and is 10,000 times brighter than Compton X-ray sources based on conventional accelerators.

Proton beams generated with high-intensity lasers: Applications to medical isotope production

Proton beams of up to 10 MeV have been obtained by the interaction of a 10 Hz “table-top” laser, focused to intensities of 6×10^19 W/cm^2, with 6-μm-thin foil targets. Such proton beams can be used to induce 11B(p,n)11C reactions, which could yield an integrated activity of 13.4 MBq (0.36 mCi) after 30 min laser irradiation. This can be extended to GBq levels using similar lasers with kilohertz repetition rates, making this positron-emission tomography isotope production scheme comparable to the one using conventional accelerators.

Proton acceleration mechanisms in high-intensity laser interaction with thin foils

The interaction of short and intense laser pulses with plasmas or solids is a very efficient source of high-energy ions. This paper reports the detailed study, with particle-in-cell simulations, of the interaction of such a laser pulse with thin, dense targets, and the resulting proton acceleration. Depending on the laser intensity and pulse duration, the most energetic protons are found to come from the front, the core, or the back of the target. The main accelerating mechanisms discussed in this paper are plasma expansion acceleration, where proton acceleration is driven by the hot electron population, and shock acceleration, originating from the laser ponderomotive potential imposed at the front target surface. Three main regimes of proton acceleration are defined and the parameters for which each regime is dominant are obtained. For irradiances close to 10^20 W/cm^2, the highest proton energies are obtained from thin foils efficiently heated by relativistic transparency. At larger intensities, a complex interplay between collisionless shock acceleration and plasma expansion acceleration is evidenced.

Laser plasma accelerators

This review article highlights the tremendous evolution of the research on laser plasma accelerators which has, in record time, led to the production of high quality electron beams at the GeV level, using compact laser systems. I will describe the path we followed to explore different injection schemes and I will present the most significant breakthrough which allowed us to generate stable, high peak current and high quality electron beams, with control of the charge, of the relative energy spread and of the electron energy.

Electron and photon production from relativistic laser-plasma interactions

The interaction of short and intense laser pulses with plasmas is a very efficient source of relativistic electrons with tunable properties. In low-density plasmas, we observed bunches of electrons up to 200 MeV, accelerated in the wakefield of the laser pulse. Less energetic electrons (tens of megaelectronvolt) have been obtained, albeit with a higher efficiency, during the interaction with a pre-exploded foil or a solid target. When these relativistic electrons slow down in a thick tungsten target, they emit very energetic Bremsstrahlung photons which have been diagnosed directly with photoconductors, and indirectly through photonuclear activation measurements. Dose, photoactivation, and photofission measurements are reported. These results are in reasonable agreement, over three orders of magnitude, with a model built on laser–plasma interaction and electron transport numerical simulations.

Absolute calibration for a broad range single shot electron spectrometer

This article gives a detailed description of a single shot electron spectrometer which was used to characterize electron beams produced by laser-plasma interaction. Contrary to conventional electron sources, electron beams from laser-plasma accelerators can produce a broad range of energies. Therefore, diagnosing these electron spectra requires specific attention and experimental development. Here, we provide an absolute calibration of the Lanex Kodak Fine screen on a laser-triggered radio frequency picosecond electron accelerator. The efficiency of scintillating screens irradiated by electron beams has never been investigated so far. This absolute calibration is then compared to charge measurements from an integrating current transformer for quasimonoenergetic electron spectra from laser-plasma interaction.

Particle-in-Cell modelling of laser-plasma interaction using Fourier decomposition

A new Particle-in-Cell code developed for the modelling of laser-plasma interaction is presented. The code solves Maxwell equations using Fourier expansion along the poloidal direction with respect to the laser propagation axis. The goal of the code is to provide a three-dimensional description of the laser-plasma interaction in underdense plasmas with computational load similar to bidimensional calculations. Code results are successfully compared with three-dimensional calculations.