Vijay J. Rasquinha

Total knee arthroplasty for severe valgus deformity.

BACKGROUND In 1985, the senior author (C.S.R.) developed a new soft-tissue release technique to balance valgus knees to avoid unacceptably high rates of late-onset instability and the need for primary constrained implants. This report describes the soft-tissue release technique and its long-term results when performed in primary total knee arthroplasty in patients with a severe valgus knee deformity. METHODS Four hundred and ninety consecutive total knee arthroplasties were performed by one surgeon between January 1988 and December 1992. In this group, seventy-one patients (eighty-five knees) had a valgus deformity of 10 degrees . Thirty-two patients (thirty-six knees) died, and four patients (seven knees) were lost to follow-up, leaving thirty-five patients (forty-two knees) followed for a minimum of five years. These twenty-seven women and eight men had a mean age of sixty-seven years at the time of the index operation. The technique included an inside-out soft-tissue release of the posterolateral aspect of the capsule with pie-crusting of the iliotibial band and resection of the proximal part of the tibia and distal part of the femur to provide a balanced, rectangular space. Cemented, posterior stabilized implants were used in all knees. Clinical and radiographic evaluations were performed at one, five, and ten years postoperatively. RESULTS The mean modified Knee Society clinical score improved from 30 points preoperatively to 93 points postoperatively, and the mean functional score improved from 34 to 81 points. The mean range of motion was 110 degrees both preoperatively and postoperatively. The mean coronal alignment was corrected from 15 degrees of valgus preoperatively to 5 degrees of valgus postoperatively. Three patients underwent revision surgery because of delayed infection, premature polyethylene wear, and patellar loosening in one patient each. There were no cases of delayed instability. CONCLUSIONS The inside-out release technique to correct a fixed valgus deformity in patients undergoing primary total knee arthroplasty is reproducible and provides excellent long-term results.

Total knee arthroplasty for severe valgus deformity: Five to fourteen-year follow-up

BACKGROUND In 1985, the senior author (C.S.R.) developed a new soft-tissue release technique to balance valgus knees to avoid unacceptably high rates of late-onset instability and the need for primary constrained implants. This report describes the soft-tissue release technique and its long-term results when performed in primary total knee arthroplasty in patients with a severe valgus knee deformity. METHODS Four hundred and ninety consecutive total knee arthroplasties were performed by one surgeon between January 1988 and December 1992. In this group, seventy-one patients (eighty-five knees) had a valgus deformity of > or =10 degrees . Thirty-two patients (thirty-six knees) died, and four patients (seven knees) were lost to follow-up, leaving thirty-five patients (forty-two knees) followed for a minimum of five years. These twenty-seven women and eight men had a mean age of sixty-seven years at the time of the index operation. The technique included an inside-out soft-tissue release of the posterolateral aspect of the capsule with pie-crusting of the iliotibial band and resection of the proximal part of the tibia and distal part of the femur to provide a balanced, rectangular space. Cemented, posterior stabilized implants were used in all knees. Clinical and radiographic evaluations were performed at one, five, and ten years postoperatively. RESULTS The mean modified Knee Society clinical score improved from 30 points preoperatively to 93 points postoperatively, and the mean functional score improved from 34 to 81 points. The mean range of motion was 110 degrees both preoperatively and postoperatively. The mean coronal alignment was corrected from 15 degrees of valgus preoperatively to 5 degrees of valgus postoperatively. Three patients underwent revision surgery because of delayed infection, premature polyethylene wear, and patellar loosening in one patient each. There were no cases of delayed instability. CONCLUSIONS The inside-out release technique to correct a fixed valgus deformity in patients undergoing primary total knee arthroplasty is reproducible and provides excellent long-term results. LEVEL OF EVIDENCE Therapeutic study, Level IV (case series [no, or historical, control group]). See Instructions to Authors for a complete description of levels of evidence.

Metal-backed and all-polyethylene tibial components in total knee replacement.

One hundred seventy-five patients with 243 consecutive primary Press Fit Condylar ® cruciate-substituting total knee replacements were evaluated at a mean of 5.5 years. One hundred thirteen knees had modular metal-backed tibial components and 130 had all-polyethylene tibial components. The mean knee score and functional score for the patients with unrevised components was not significantly different. The incidence of osteolysis and synovitis was higher in patients in the modular metal-backed tibia group (5%; five patients, six knees). No patients in the all-polyethylene tibia group had osteolysis or synovitis. Five revision operations were necessary: four for osteolytic defects and one for synovitis, all in patients in the modular metal-backed tibia group. All of the retrieved polyethylene inserts had evident backside wear. The best case rate of survival of the allpolyethylene tibial components was 96% ± 0.8% at 7 years and for the modular metal-backed components it was 75% ± 10% at 7 years. Metal backing and modularity were added to the Press Fit Condylar ® total knee replacement design to improve fixation durability. However, the superiority of the modular metal-backed implants remains in question.

The press-fit condylar modular total knee system with a posterior cruciate-substituting design. A concise follow-up of a previous report.

The purpose of the present study was to determine the long-term results of a series of 150 consecutive primary posterior stabilized modular knee arthroplasties that had been performed in 118 patients with use of a circumferential tibial insert capture as described in a previous report, published in 1997. The patients were evaluated with use of a patient-administered questionnaire; Knee Society clinical, functional, and radiographic scoring systems; and Kaplan-Meier survivorship analysis. A good to excellent result was confirmed in seventy-six (90%) of the eighty-four patients (105 knees) with a mean duration of follow-up of twelve years (range, ten to thirteen years). At twelve years, the survival rate was 94.6% +/- 4.0% with failure for any reason as the end point and 98.3% +/- 2.4% with mechanical failure as the end point. Revision surgery was performed in five knees because of infection (two knees), dislocation (one knee), and substantial polyethylene wear with femoral osteolysis (two knees). We concluded that, while fixation failure is rare, polyethylene wear and osteolysis are emerging as important causes of failure.

Two-Year to Five-Year Follow-Up of Femoral Defects in Femoral Revision Treated With the Link MP Modular Stem

Femoral deficiency has been shown to adversely affect the results of revision total hip arthroplasty. Tapered titanium modular stems allow distal fixation of the fluted, conical portion of the implant in the setting of proximal bone loss. One hundred two consecutive hips with proximal bone loss underwent revision femoral reconstruction between 1998 and 2002 at 3 centers using the Link MP modular stem. Forty-three hips had Mallory type 3C femoral deficiency. Ninety-seven hips were observed for an average of 45 months (range, 24-72; median, 36 months). Clinically, mean Harris hip score improved from 36 to 84 (range, 54-99). Radiographically, 93 hips were considered stable, with no circumferential lucencies at the distal fixation surface. Three hips migrated and required revision, along with one periprosthetic fracture. Five other hips had nonprogressive migration of 1 to 2 mm.

Revision total hip arthroplasty for ceramic head fracture: a long-term follow-up.

The results of revision total hip arthroplasty (THA) for ceramic head fracture have generally been disappointing, largely due to third body wear after incomplete synovectomy. We have followed 8 patients who sustained ceramic head fractures and were subsequently revised to a metal-on-polyethylene articulation. There were no revisions for osteolysis or aseptic loosening at a mean follow-up of 10.5 years. The yearly wear rates of each of 5 of these THAs after revision were compared with 6 matched metal-on-polyethylene THAs; there were no significant differences in wear rates. Greater than 10-year survivorship with a metal-on-polyethylene bearing couple is possible after revision THA for a ceramic head fracture if a complete and thorough synovectomy can be performed. Our technique of synovectomy will be described.

Fifteen-year survivorship of a collarless, cemented, normalized femoral stem in primary hybrid total hip arthroplasty with a modified third-generation cement technique

This prospective review aimed to evaluate 15-year survivorship of the collarless, third-generation cemented, normalized, Omnifit (Osteonics, Allendale, NJ) femoral stem in hybrid total hip arthroplasty (THA). Between January 1986 and June 1990, a single surgeon prospectively implanted 250 consecutive hybrid THAs (215 patients) using a modified third-generation cement technique in selected patients. A Harris-Galante (I or II) (Zimmer, Warsaw, IN) cementless shell with modular polyethylene (4150 resin) liners gamma-sterilized in air were implanted. Kaplan-Meier survivorship of the femoral or acetabular component with mechanical failure (revision for aseptic loosening) as the end-point was 100% +/- 0% at 15 years. Wear couple exchange and bone grafting was performed in 1 case (0.4%) for progressive acetabular osteolysis. This report supports femoral component centralization and good cement mantle to ensure durability of the collarless, cemented, normalized femoral stem with a surface roughness of 30-40 microinches.

Management of Failed Trochanteric Fracture Fixation With Cementless Modular Hip Arthroplasty Using a Distally Fixing Stem

Failure of internal fixation of intertrochanteric fractures is associated with delayed union or malunion resulting in persistent pain and diminished function. We evaluated 15 elderly patients treated with a tapered, fluted, modular, distally fixing cementless stem. At an average follow-up of 2.86 years, mean Harris hip score improved from 35.90 preoperatively to 83.01 (P < .01). Fourteen stems had stable bony on growth, and one stem was loose. Distal fixation with a tapered, fluted, modular cementless stem allows stable fixation with good functional outcome in a reproducible fashion in this challenging cohort of patients.

Durability of the cemented femoral stem in patients 60 to 80 years old

The importance of surface roughness and durability of fixation of the cemented femoral stem were examined. Three cohorts of patients approximately 60 to 80 years old, had cemented total hip replacements: Charnley (1978–1983) with first-generation cement technique consisting of canal-plugging and digital packing; Omnifit (1986–1991), and Ranawat-Burstein (R-B) Interlok (1992–1994) with modified third-generation cement technique. Kaplan-Meier survivorships, using failure for all causes (best case) were 90% ± 5.1% at 20 years for the Charnley 95.1% ± 3.4% at 15 years for the Omnifit and 99.5% ± 0.5% at 9 years for the R-B Interlok prosthesis. Log rank test with paired data showed no significant differences between the groups for mechanical failure as an end point. Comparisons of survivorship curves for failure from all causes showed significant differences between the Charnley compared with the Omnifit and Interlok series respectively, with no significant differences between the Omnifit and R-B Interlok series. The cemented femoral stem, with a good cement mantle and surface roughness ranging from 30 to 150 microinches, did not show any significant differences in mechanical failure. Other variables such as stem centralization and low polyethylene wear need additional evaluation in survivorship of cemented total hip replacements.

Patterns of Osseointegration and Remodeling in Femoral Revision With Bone Loss Using Modular, Tapered, Fluted, Titanium Stems

Radiographic signs of osseointegration with the use of fluted, tapered, modular, titanium stems in revision hip arthroplasty with bone loss have not been previously categorized. Serial radiographs of 64 consecutive hips with mean follow-up of 6.2 years were retrospectively reviewed. Bone loss was classified as per Paprosky classification, osseointegration was assessed according to a modified system of Engh et al, and Harris Hip Score was used to document pain and function. Seventy-four percent of the hips had type 3 or 4 bone loss. All stems were radiographically osseointegrated. Early minor subsidence was seen in 6.2% of the hips; definite bony regeneration, 73% of the hips; and stress shielding, 26% of the hips. These osseointegration patterns were different from those described for extensively porous-coated cobalt-chromium stems and had a bearing on the evaluation of fixation of these stems.