Vijayasankar Raman

An integrated approach utilising chemometrics and GC/MS for classification of chamomile flowers, essential oils and commercial products

As part of an ongoing research program on authentication, safety and biological evaluation of phytochemicals and dietary supplements, an in-depth chemical investigation of different types of chamomile was performed. A collection of chamomile samples including authenticated plants, commercial products and essential oils was analysed by GC/MS. Twenty-seven authenticated plant samples representing three types of chamomile, viz. German chamomile, Roman chamomile and Juhua were analysed. This set of data was employed to construct a sample class prediction (SCP) model based on stepwise reduction of data dimensionality followed by principle component analysis (PCA) and partial least squares discriminant analysis (PLS-DA). The model was cross-validated with samples including authenticated plants and commercial products. The model demonstrated 100.0% accuracy for both recognition and prediction abilities. In addition, 35 commercial products and 11 essential oils purported to contain chamomile were subsequently predicted by the validated PLS-DA model. Furthermore, tentative identification of the marker compounds correlated with different types of chamomile was explored.

Comparative Investigation of Umbellularia californica and Laurus nobilis Leaf Essential Oils and Identification of Constituents Active against Aedes aegypti

Umbellularia californica (California bay laurel) and Laurus nobilis (Mediterranean bay laurel) leaves may be mistaken or used as a substitute on the market due to their morphological similarity. In this study, a comparison of anatomical and chemical features and biological activity of both plants is presented. L. nobilis essential oil biting deterrent and larvicidal activity were negligible. On the other hand, U. californica leaf oil showed biting deterrent activity against Aedes aegypti . The identified active repellents was thymol, along with (-)-umbellulone, 1,8-cineole, and (-)-α-terpineol. U. californica essential oil also demonstrated good larvicidal activity against 1-day-old Ae. aegypti larvae with a LD50 value of 52.6 ppm. Thymol (LD50 = 17.6 ppm), p-cymene, (-)-umbellulone, and methyleugenol were the primary larvicidal in this oil. Umbellulone was found as the principal compound (37%) of U. californica essential oil, but was not present in L. nobilis essential oil. Umbellulone mosquito activity is here reported for the first time.

New and unusual forms of calcium oxalate raphide crystals in the plant kingdom

Calcium oxalate crystals in higher plants occur in five major forms namely raphides, styloids, prisms, druses and crystal sand. The form, shape and occurrence of calcium oxalate crystals in plants are species- and tissue-specific, hence the presence or absence of a particular type of crystal can be used as a taxonomic character. So far, four different types of needle-like raphide crystals have been reported in plants. The present work describes two new and unusual forms of raphide crystals from the tubers of Dioscorea polystachya—six-sided needles with pointed ends (Type V) and four-sided needles with beveled ends (Type VI). Both of these new types of needles are distinct from the other four types by each having a surrounding membrane that envelopes a bundle of 10–20 closely packed thin crystalline sheets. The previously known four types of needles have solid or homogenous crystalline material, surrounded by a membrane or lamellate sheath called a crystal chamber. Only the Type VI crystals have beveled ends and the needles of the other five types have pointed ends.

Iontophoretic Drug Delivery for the Treatment of Scars

Topical treatment of hypertrophic scars is challenging because of poor penetrability of drugs into the scar tissue. The objective of the study was to investigate the effectiveness of iontophoresis to deliver medicaments across the scar epidermis. Initially, biophysical studies were performed to investigate the differences between scar and normal skin epidermis obtained from cadaver. In case of scar skin epidermis, the transepidermal water loss was not significantly different from the normal skin epidermis, whereas the electrical resistivity was significantly higher. The passive permeation flux of sodium fluorescein was approximately one-third of that across the normal skin epidermis. Scanning electron microscopy studies revealed that the two membranes were alike except that the scar skin epidermis lacked follicles. Cathodal iontophoresis enhanced the delivery of sodium fluorescein across the scar skin epidermis by approximately 46 folds [51.90 ± 8.82 ng/(cm(2) h)]. However, the transport of sodium fluorescein across the scar skin epidermis was about an order of magnitude less than the normal skin epidermis. Overall, the studies suggest that iontophoresis could be utilized to overcome the barrier resistance of scar skin epidermis and treat the scar regionally.

Controlled‐release injectable containing Terbinafine/PLGA microspheres for Onychomycosis Treatment

Controlled-release drug delivery systems based on biodegradable polymers have been extensively evaluated for use in localized drug delivery. In the present study, intralesionally injectable poly (lactide-co-glycolide) (PLGA) microspheres for controlled release of terbinafine hydrochloride (TH) was developed for treating fungal toe/finger nail infections. TH-PLGA microspheres were formulated using O/W emulsification and modified solvent extraction/evaporation technique. Microspheres were evaluated for particle size and size distribution, encapsulation efficiency, surface, and morphology. The in vitro drug release profile was studied in aqueous media as well as in 1% agar gel. Microspheres system was also evaluated in excised cadaver toe model, and extent of TH accumulation in nail bed, nail plate, and nail matrix was measured at different time points. Microspheres were found to provide consistent and sustained TH release. Intralesional administration of controlled-release microspheres can be a potential alternative mode of treating fungus-infected toe and/or finger nails.

Diclofenac sodium ion exchange resin complex loaded melt cast films for sustained release ocular delivery

Abstract Purpose: The goal of the present study is to develop polymeric matrix films loaded with a combination of free diclofenac sodium (DFSfree) and DFS:Ion exchange resin complexes (DFS:IR) for immediate and sustained release profiles, respectively. Methods: Effect of ratio of DFS and IR on the DFS:IR complexation efficiency was studied using batch processing. DFS:IR complex, DFSfree, or a combination of DFSfree + DFS:IR loaded matrix films were prepared by melt-cast technology. DFS content was 20% w/w in these matrix films. In vitro transcorneal permeability from the film formulations were compared against DFS solution, using a side-by-side diffusion apparatus, over a 6 h period. Ocular disposition of DFS from the solution, films and corresponding suspensions were evaluated in conscious New Zealand albino rabbits, 4 h and 8 h post-topical administration. All in vivo studies were carried out as per the University of Mississippi IACUC approved protocol. Results: Complexation efficiency of DFS:IR was found to be 99% with a 1:1 ratio of DFS:IR. DFS release from DFS:IR suspension and the film were best-fit to a Higuchi model. In vitro transcorneal flux with the DFSfree + DFS:IR(1:1)(1 + 1) was twice that of only DFS:IR(1:1) film. In vivo, DFS solution and DFS:IR(1:1) suspension formulations were not able to maintain therapeutic DFS levels in the aqueous humor (AH). Both DFSfree and DFSfree + DFS:IR(1:1)(3 + 1) loaded matrix films were able to achieve and maintain high DFS concentrations in the AH, but elimination of DFS from the ocular tissues was much faster with the DFSfree formulation. Conclusion: DFSfree + DFS:IR combination loaded matrix films were able to deliver and maintain therapeutic DFS concentrations in the anterior ocular chamber for up to 8 h. Thus, free drug/IR complex loaded matrix films could be a potential topical ocular delivery platform for achieving immediate and sustained release characteristics.

Vegetative anatomy and micromorphology of Salvia divinorum (Lamiaceae) from Mexico, combined with chromatographic analysis of salvinorin A

Salvia divinorum—a species traditionally cultivated in Oaxaca, Mexico—possesses hallucinogenic properties. It is legally recognized as a controlled substance and prohibited in many countries. The proper identification of the plant, both in fresh and dried forms, is an important issue in crime-prevention campaigns. This paper provides a thorough anatomical description of leaves, petioles, and stems of S. divinorum. Detailed investigation of foliar trichomes was performed and illustrated. In addition, chromatographic analyses, including TLC and HPLC, were applied to fresh and dried plant material, together with the standard reference salvinorin A. A comprehensive identification method for S. divinorum based on a thorough anatomical examination is proposed, combined with chemical analysis for proper plant recognition.

Microscopic and UPLC–UV–MS analyses of authentic and commercial yohimbe ( Pausinystalia johimbe ) bark samples

Yohimbine is the major alkaloid found in the stem bark of yohimbe, Pausinystalia johimbe (Rubiaceae), an evergreen tree native to Africa. The objectives of the current study were to provide a detailed anatomy of yohimbe bark, as well as to determine the quantity of yohimbine in the raw yohimbe products sold online. Twelve commercial raw materials of yohimbe were analyzed by microscopic and ultra performance liquid chromatography–UV–MS methods. The study revealed that three samples were probably adulterated and four other samples contained various levels of impurities. Yohimbine was not detected in one sample, whereas its presence in other samples was found to be in the range 0.1–0.91%. The present work also provides a detailed anatomy of the stem bark of yohimbe, with light and scanning electron microscopy images, for proper identification and authentication.

Simultaneous Determination of Aegeline and Six Coumarins from Different Parts of the Plant Aegle marmelos Using UHPLC-PDA-MS and Chiral Separation of Aegeline Enantiomers Using HPLC-ToF-MS

A fast UHPLC-PDA method was developed for the simultaneous analysis of one alkaloid, aegeline, and six coumarins, viz., umbelliferone, scopoletin, marmesinin, 8-hydroxypsoralen, angelicin, and marmelosin, from the leaf, fruit, root, and bark of Aegle marmelos. The UHPLC method was validated for linearity, accuracy, repeatability, limits of detection and limits of quantification. The linearity range (r(2) > 0.99) of the seven compounds was found to be 0.5-250 µg/mL, and the limits of detection and limits of quantification for the seven compounds were found to be 0.1 and 0.5 µg/mL, respectively. The developed UHPLC method is simple, fast, and especially suitable for quality control analysis of coumarins and aegeline from A. marmelos and commercial dietary supplements. Single quadrupole mass spectrometry was used for the identification and confirmation of coumarins and aegeline from different plant parts and dietary supplements. In addition, a novel chiral HPLC-ToF-MS method was developed for the resolution of aegeline enantiomers. By applying this chiral method, the distribution of enantiomers of aegeline from different parts of A. marmelos and aegeline-containing dietary supplements is reported for the first time.

Application of anatomy and HPTLC in characterizing species of Dioscorea (Dioscoreaceae)

The edible tubers from different species of Dioscorea are a major source of food and nutrition for millions of people. Some of the species are medicinally important but others are toxic. The genus consists of about 630 species of almost wholly dioecious plants, many of them poorly characterized. The taxonomy of Dioscorea is confusing and identification of the species is generally problematic. There are no adequate anatomical studies available for most of the species. This study is aimed to fill this gap and provides a detailed investigation of the anatomy and micro-morphology of the rhizomes and tubers of five different species of Dioscorea, namely D. balcanica, D. bulbifera, D. polystachya, D. rotundata and D. villosa. The primary features that can help in distinguishing the species include the nature of periderm, presence or absence of pericyclic sclereids, lignification in the phloem, types of calcium oxalate crystals and features of starch grains. The descriptions are supported with images of bright-field and scanning electron microscopy for better understanding of these species. The diagnostic key of anatomical features included in this paper can help distinguish the investigated species unambiguously. Additionally, HPTLC analyses of authentic and commercial samples of the five species are described.