Vilasrao Kadam

Advances in polymeric micelles for drug delivery and tumor targeting

A plethora of formulation techniques have been reported in the literature for targeting drugs to specific sites. Polymeric micelles (PMs) can be targeted to tumor sites by passive as well as active mechanisms. Some inherent properties of PMs, including size in the nanorange, stability in plasma, longevity in vivo, and pathological characteristics of tumor allow PMs to be targeted to the tumor site by a passive mechanism called the enhanced permeability and retention effect. PMs formed from an amphiphilic block copolymer are suitable for encapsulation of poorly water-soluble, hydrophobic anticancer drugs. Other characteristics of PMs such as separate functionality at the outer shell are useful for targeting the anticancer drug to tumor by active mechanisms. PMs can be conjugated with many ligands such as antibody fragments, epidermal growth factors, α(2)-glycoprotein, transferrin, and folate to target micelles to cancer cells. Application of heat or ultrasound are the alternative methods to enhance drug accumulation in tumoral cells. Targeting using micelles can also be directed toward tumor angiogenesis, which is a potentially promising target for anticancer drugs. PMs have been used for the delivery of many anticancer agents in preclinical and clinical studies. This review summarizes recently available information regarding targeting of anticancer drugs to the tumor site using PMs.

Development and in vitro evaluation of an oral floating matrix tablet formulation of diltiazem hydrochloride

The purpose of this research was to prepare a floating drug delivery system of diltiazem hydrochloride (DTZ). Floating matrix tablets of DTZ were developed to prolong gastric residence time and increase its bioavailability. Rapid gastrointestinal transit could result in incomplete drug release from the drug delivery system above the absorption zone leading to diminished efficacy of the administered dose. The tablets were prepared by direct compression technique, using polymers such as hydroxypropylmethylcellulose (HPMC, Methocel K100M CR), Compritol 888 ATO, alone or in combination and other standard excipients. Sodium bicarbonate was incorporated as a gas-generating agent. The effects of sodium bicarbonate and succinic acid on drug release profile and floating properties were investigated. A 32 factorial design was applied to systematically optimize the drug release profile. The amounts of Methocel K100M CR (X1) and Compritol 888 ATO (X2) were selected as independent variables. The time required for 50% (t50) and 85% (t85) drug dissolution were selected as dependent variables. The results of factorial design indicated that a high level of both Methocel K100M CR (X1) and Compritol 888 ATO (X2) favors the preparation of floating controlled release of DTZ tablets. Comparable release profiles between the commercial product and the designed system were obtained. The linear regression analysis and model fitting showed that all these formulations followed Korsmeyer and Peppas model, which had a higher value of correlation coefficient (r). While tablet hardness had little or no effect on the release kinetics and was found to be a determining factor with regards to the buoyancy of the tablets.

Mucoadhesive Bilayered Patches for Administration of Sumatriptan Succinate

The purpose of this study was to develop and optimize formulations of mucoadhesive bilayered buccal patches of sumatriptan succinate using chitosan as the base matrix. The patches were prepared by the solvent casting method. Gelatin and polyvinyl pyrrolidone (PVP) K30 were incorporated into the patches, to improve the film properties of the patches. The patches were found to be smooth in appearance, uniform in thickness, weight, and drug content; showed good mucoadhesive strength; and good folding endurance. A 32 full factorial design was employed to study the effect of independent variables viz. levels of chitosan and PVP K30, which significantly influenced characteristics like swelling index, in-vitro mucoadhesive strength, in vitro drug release, and in-vitro residence time. Different penetration enhancers were tried to improve the permeation of sumatriptan succinate through buccal mucosa. Formulation containing 3% dimethyl sulfoxide showed good permeation of sumatriptan succinate through mucosa. Histopathological studies revealed no buccal mucosal damage. It can be concluded that buccal route can be one of the alternatives available for administration of sumatriptan succinate.

Applications of microemulsion based drug delivery system.

The use of microemulsions as drug delivery vehicle has been an exciting and attractive area of research because of its many potential and extraordinary benefits. Microemulsions offer an interesting and potentially quite powerful alternative carrier system for drug delivery because of their high solubilization capacity, transparency, thermodynamic stability, ease of preparation, and high diffusion and absorption rates when compared to solvent without the surfactant system. The oral efficacy of microemulsion has already been proved by cyclosporine formulation (Neoral), but apart from oral route, microemulsions for other routes like dermal, transdermal, ocular, vaginal, rectal, buccal, periodontal, parenteral, and nasal delivery routes have also been developed. The present review focuses on various applications of microemulsions through different above mentioned routes and also gives idea about new application of micro emulsion as oral solid dosage form, as microreactors and as blood substitute.

Solid lipid nanoparticles and nanostructured lipid carriers--innovative generations of solid lipid carriers.

The first generation of solid lipid carrier systems in nanometer range, Solid Lipid Nanoparticles (SLN), was introduced as an alternative to liposomes. SLN are aqueous colloidal dispersions, the matrix of which comprises of solid biodegradable lipids. SLN are manufactured by techniques like high pressure homogenization, solvent diffusion method etc. They exhibit major advantages such as modulated release, improved bioavailability, protection of chemically labile molecules like retinol, peptides from degradation, cost effective excipients, improved drug incorporation and wide application spectrum. However there are certain limitations associated with SLN, like limited drug loading capacity and drug expulsion during storage, which can be minimized by the next generation of solid lipids, Nanostructured lipid carriers (NLC). NLC are lipid particles with a controlled nanostructure that improves drug loading and firmly incorporates the drug during storage. Owing to their properties and advantages, SLN and NLC may find extensive application in topical drug delivery, oral and parenteral administration of cosmetic and pharmaceutical actives. Cosmeceuticals is emerging as the biggest application target of these carriers. Carrier systems like SLN and NLC were developed with a perspective to meet industrial needs like scale up, qualification and validation, simple technology, low cost etc. This paper reviews present status of SLN and NLC as carrier systems with special emphasis on their application in Cosmeceuticals; it also gives an overview about various manufacturing techniques of SLN and NLC.

Enkephalinase Inhibitors: Potential Agents for the Management of Pain

Management of acute and chronic pain has always been a key area of clinical research. Enkephalinase inhibitors (EIs) seem to be promising as therapeutic agents having antinociceptive action. They additionally possess anticraving, antidiarrhoeal and antidepressant actions. The antinociceptive action of EIs has been reported for over a decade however, their therapeutic potential is yet to be effectively explored. EIs may be broadly classified as endogenous and those that are obtained synthetically. Endogenous EIs include peptides like spinorphin and opiorphin. And compounds like RB 101, RB 120, RB 3007 constitute the synthetically obtained EIs. Endogenous and synthetic inhibitors enkephalin degrading enzymes have been studied in vivo using standard animal models. The potential EI targets appear to be APN (Aminopeptidase N), NEP (Neutral endopeptidase), DPP-III (Dipeptidyl peptidase). EIs possess the advantage that they lack the opioid side effects. This article reviews the mechanisms by which EIs act and elucidates the pathways involved.

Formulation and Evaluation of Flurbiprofen Microemulsion

The purpose of the present study was to investigate the microemulsion formulations for topical delivery of Flurbiprofen (FP) in order to by pass its gastrointestinal adverse effects. The pseudoternary phase diagrams were developed and various microemulsion formulations were prepared using Isopropyl Myristate (IPM), Ethyl Oleate (EO) as oils, Aerosol OT as surfactant and Sorbitan Monooleate as cosurfactant. The transdermal permeability of flurbiprofen from microemulsions containing IPM and EO as two different oil phases was analyzed using Keshary-Chien diffusion cell through excised rat skin. Flurbiprofen showed higher in vitro permeation from IPM as compared to that of from EO microemulsion. Thus microemulsion containing IPM as oil phase were selected for optimization. The optimization was carried out using 2(3) factorial design. The optimized formula was then subjected to in vivo anti-inflammatory study and the performance of flurbiprofen from optimized formulation was compared with that of gel cream. Flurbiprofen from optimized microemulsion formulation was found to be more effective as compared to gel cream in inhibiting the carrageenan induced rat paw edema at all time intervals. Histopathological investigation of rat skin revealed the safety of microemulsion formulation for topical use. Thus the present study indicates that, microemulsion can be a promising vehicle for the topical delivery of flurbiprofen.

Buccal Drug Delivery of Pravastatin Sodium

The purpose of this study was to develop and optimize formulations of mucoadhesive bilayered buccal tablets of pravastatin sodium using carrageenan gum as the base matrix. The tablets were prepared by direct compression method. Polyvinyl pyrrolidone (PVP) K 30, Pluronic® F 127, and magnesium oxide were used to improve tablet properties. Magnesium stearate, talc, and lactose were used to aid the compression of tablets. The tablets were found to have good appearance, uniform thickness, diameter, weight, pH, and drug content. A 23 full factorial design was employed to study the effect of independent variables viz. levels of carrageenan gum, Pluronic F 127 and PVP K30, which significantly influenced characteristics like in vitro mucoadhesive strength, in vitro drug release, swelling index, and in vitro residence time. The tablet was coated with an impermeable backing layer of ethyl cellulose to ensure unidirectional drug release. Different penetration enhancers were tried to improve the permeation of pravastatin sodium through buccal mucosa. Formulation containing 1% sodium lauryl sulfate showed good permeation of pravastatin sodium through mucosa. Histopathological studies revealed no buccal mucosal damage. It can be concluded that buccal route can be one of the alternatives available for the administration of pravastatin sodium.

Cyclodextrin-based nanosponges: a propitious platform for enhancing drug delivery

Introduction: Recently, Nanotechnology is receiving considerable acknowledgment due to its potential to combine features that are difficult to achieve by making use of a drug alone. Cyclodextrin-based nanosponges are yet another contemporary approach for highlighting the advancements which could be brought about in a drug delivery system. Statistical analyses have shown that around 40% of currently marketed drugs and about 90% of drugs in their developmental phase encounter solubility-related problems. Cyclodextrin-based nanosponges have the capacity to emerge as a productive approach over conventional cyclodextrins by overcoming the disadvantages associated with the latter. Areas covered: This review is intended to give an insight regarding cyclodextrin-based nanosponges such as their physical and chemical properties. In addition, methods of preparation and characterization are discussed along with biocompatibility, and how these nanomeric elements can be exploited in developing effective drug formulations. Expert opinion: This emerging technology of cyclodextrin-based nanosponges is expected to provide technical solutions to the formulation arena and to come up with some successful products in the pharmaceutical market. It also has an exciting future in the field of therapeutics wherein it can cater site-directed drug delivery and hence it possesses vibrant opportunities.

Topical delivery of aceclofenac from lecithin organogels: preformulation study.

The purpose of this research is to evaluate the suitability of lecithin organogels containing aceclofenac for topical application. The present article focuses on the preformulation part of the whole research work. Thin layer chromatography was carried out to determine lecithins purity. The excipients for formulating lecithin organogel were screened. Lecithin organogels are thermo reversible in nature and hence gelation temperature study was carried out to determine the temperature where Sol-Gel and Gel-Sol transformation takes place. Partition coefficient of the drug was estimated. Drug solubility in plain oil and organogel containing reverse micelles was estimated. Effect of water added on the properties of lecithin organogels such as X-ray diffraction pattern, conductivity and viscosity were determined. Microscopy of the gel sample has been carried out at different magnifications. The pseudo ternary phase diagram has been constructed to determine the organogel existence region. The permeation study of aceclofenac from different concentrations of lecithin organogels [200 mM, 300 mM and 400 mM] has been determined using cellulose acetate membrane (0.45 micro) and excised rat skin. Lecithin organogel in ethyl oleate has desired stability and consistency. A single spot on the TLC plate confirms the purity of soy lecithin to be used in organogel formation. Aceclofenac solubility was found to be more in lecithin/oil reverse micellar system as compared to its solubility in oil. The X-ray diffraction pattern confirms the incorporation of water in micellar gel network. The physical properties of organogels are affected by water incorporated and concentration of gelator. The permeation of aceclofenac through artificial membrane and excised rat skin demonstrated the same trend and were in the following order 200 mM>300 mM>400 mM. The results showed that organogel exhibits useful pharmaceutical properties.