Vincenzo Cascioli

Studying thermal characteristics of seating materials by recording temperature from 3 positions at the seat-subject interface

AIM OF THE STUDY To determine whether 3 fixed positions of seat-subject interface temperature measurement offer more information than a single point of measurement. MATERIALS AND METHODS Temperature data was simultaneously acquired (sampling frequency 1 Hz/sensor) from each of three sensor positions (right & left mid-thigh and coccyx), from the subject-seat interface. The data was acquired whilst subjects (6 males, 5 females: 21-40 yrs: BMI 19.3-26.4) sat for 20 min on each of three types of seat material (foam, gel mould and solid wood). Data collection was performed at the same time of day for each subject: ambient temperature between 21.1 and 21.2 °C, ambient relative humidity 50.9%. RESULTS Analysis of data from the sensors, post mathematical smoothing, for each subject (n = 11; ANOVA, followed by post-hoc t-tests) revealed each of the measurement positions to have a significantly different recorded temperature (p < 0.01). However, profile of temperature change at the same measurement position using the same seating material during the 20 min sitting period, was highly correlated (r > 0.99) between subjects, a consistent finding across all 11 subjects regardless of seat material selected. CONCLUSION Use of 3 positions of measurement (3 sensors) appears necessary when performing detailed studies of temperature change at the seat-subject interface. The high level of comparability of results between subjects supports potential of this method to resolve quantitative components of qualitative measurements, e.g., thermal comfort.

An investigation into the production of intra-articular gas bubbles and increase in joint space in the zygapophyseal joints of the cervical spine in asymptomatic subjects after spinal manipulation

OBJECTIVES To analyze the size and density of cervical zygapophyseal joint spaces in asymptomatic subjects using computed tomography (CT) and plain film radiography. The joint spaces were analyzed before manipulation without traction, before manipulation with manual traction, after manipulation without traction, and after manipulation with manual traction. The data obtained before the manipulation were compared with data obtained after the manipulation to determine if significant alterations occurred. DESIGN Twenty-two asymptomatic subjects were placed into 1 or more of 6 possible experimental groups. In all experimental groups, except for experiment 1, the subjects underwent: (step 1) a premanipulation radiograph and/or CT scan, (step 2) a premanipulation plus traction radiograph and/or CT scan, (step 3) a postmanipulation radiograph and/or CT scan, and (step 4) a postmanipulation plus traction radiograph and/or CT scan. RESULTS Except for experiment 2, there was no significant change in the width, area, and density values of the zygapophyseal joint spaces immediately after the manipulation in either the traction or traction-free positions of the neck, and no visible radiolucent cavities were demonstrated in any view. CONCLUSION No evidence of gas in the joint space or obvious increase in zygapophyseal joint space width immediately after the manipulation was found. This was evident in both the traction and traction-free postmanipulation scans and plain film images. This is not consistent with the current understanding of cavitation in joints, in particular, the refractory period.

Assessment of humidity and temperature sensors and their application to seating

Humidity and temperature are considered to be important factors in designing comfortable seat surfaces. A small number of studies have attempted to address this; however the methods used were limited regarding the placement of their sensors. This study aimed to design a sensor array system to investigate changes in humidity and temperature for eventual use in the study of factors affecting sitting comfort and incontinence detection. The system was subjected to three types of experiments: sensor response verification, thermal radiation testing and in situ trials. The variance in output within each type of sensor was small (±3.5% and ±0.3°C) and there was no apparent change to the variance in output of the sensors, when used in air or on a foam cushion loaded with a 50 kg sandbag (p > 0.1). In the human sitting experiments, although the profile from sensors under the thighs and ischial tuberosities were similar, the magnitude of change could be affected by position and body mass of the subject. This was especially noticeable with the sensors under the coccyx. These results support the use of multiple sites for sensor placement over the use of a single site when studying these parameters at the interface between subject and seating material at the seat base.

A methodology using in-chair movements as an objective measure of discomfort for the purpose of statistically distinguishing between similar seat surfaces

This study presents a method for objectively measuring in-chair movement (ICM) that shows correlation with subjective ratings of comfort and discomfort. Employing a cross-over controlled, single blind design, healthy young subjects (n = 21) sat for 18 min on each of the following surfaces: contoured foam, straight foam and wood. Force sensitive resistors attached to the sitting interface measured the relative movements of the subjects during sitting. The purpose of this study was to determine whether ICM could statistically distinguish between each seat material, including two with subtle design differences. In addition, this study investigated methodological considerations, in particular appropriate threshold selection and sitting duration, when analysing objective movement data. ICM appears to be able to statistically distinguish between similar foam surfaces, as long as appropriate ICM thresholds and sufficient sitting durations are present. A relationship between greater ICM and increased discomfort, and lesser ICM and increased comfort was also found.

Manual care of residents with spinal pain within a therapeutic community

Purpose The purpose of this paper is to examine the outcomes of chiropractic manipulative and manual therapy (MMT) provided to residents experiencing spinal pain in a substance misuse therapeutic community (TC). Design/methodology/approach Clinical audit to explore the potential benefits of the interventions offered to residents experiencing spinal pain in a TC. Residents seeking care underwent an assessment by either general practitioner or chiropractic intern. Eligible participants could choose one of the four interventions: usual care without any additional treatment (Group 1), usual care with simple analgesics (Group 2), usual care plus MMT without simple analgesics (Group 3), or usual care plus MMT with simple analgesics (Group 4). Outcome measures were the RAND-36-item short form health-related quality-of-life survey and the patient satisfaction questionnaire (PSQ). Data were collected at baseline and after six weeks for each participant, with those participants choosing MMT receiving up to six treatments over the study period. Two cycles of six weeks of data collection was used. Data were analysed for statistically significant (repeated measures ANOVA with Bonferroni correction) and clinically meaningful changes in scores. Findings Of 71 self-presenting residents seeking care, 68 were eligible to participate. Of these, 32 chose usual care with simple analgesics (Group 2) and 36 chose usual care plus the package of MMT but without simple analgesics (Group 3). None chose usual care without additional treatment or usual care plus the package of MMT with analgesics, thus offering only the data from two groups for analysis. Group allocation was non-random and based on patient choice. Between-group analysis of the cumulative and component RAND-36 data indicated a significant difference between the two groups (p=0.034), particularly in the physical outcomes (p=0.012), indicating that Group 3 had improved scores over Group 2. Group 3 showed a significant change in RAND-36 scores (p<0.01) when compared with Group 2 (p=0.23) over the six-week treatment period. The PSQ scores of the two groups showed a statistically significant difference (p=0.0093), suggesting that Group 3 had greater patient satisfaction with care. The outcomes suggest that the package of MMT in Group 3, delivered by an appropriately trained clinician may have added to therapeutic effect that extended beyond physical outcomes but also influenced psychological outcomes. Research limitations/implications The results of this clinical outcome-based audit suggest that the addition of a package of chiropractic MMT to usual care may be of benefit over usual care with simple analgesics for residents of a TC with spinal pain. The results intimate that benefits may extend across both the physical and psychological components of the pain experience, although a confirmatory study is recommended to substantiate these insights. Originality/value As far as the authors are aware, this trial is the first of this type in a TC, with the insights and experience gained supporting a definitive trial.

Investigating thermal performance of different chairs at the user-seat interface by a temperature sensor array system while participants perform office work

Recently, there has been an escalating trend towards sedentary lifestyle in the modern society (i.e. reading books, watching movies or driving cars). It has been estimated that the proportion of time spent sitting accounts for more than one third of a persons total life-time [1]...

The use of nutritional guidance within chiropractic patient management: a survey of 333 chiropractors from the ACORN practice-based research network

BackgroundFood consumption and nutritional status affect an individual’s health throughout their life-course and an unhealthy diet is a major risk factor for the current global burden of chronic disease. The promotion of health and good nutrition through healthy eating requires the active involvement of all health professionals including chiropractors. This paper reports findings from the first nationally representative examination of the use of nutritional guidance within chiropractic patient management in Australia.MethodsA sample of 1000 practising chiropractors was randomly selected from the Australian Chiropractic Research Network (ACORN) practice-based research network database for a cross-sectional study and 33% participated in the online survey in November 2016. The questionnaire, based on previous designs used in similar surveys and nutrition resources developed by the National Health and Medical Research Council, was pretested prior to the survey. Pearson’s Chi square and bivariate logistic regression were undertaken to explore relationships with variables of interest.ResultsThe demographic details of the respondents are similar to those of the chiropractic workforce registered in Australia. Most chiropractors provided nutritional advice as part of their patient care and around a quarter provided specific dietary advice to their patients, including the use of nutrition supplements. Nutrition-related conditions most commonly encountered by the chiropractors were musculoskeletal, usually inflammatory in origin. Common nutritional assessment methods used included questioning patients to assess their nutritional and health status and physical appearance. Most of the participants provided nutritional resources to their patients in their clinics. However, the Australian Dietary Guidelines and the accompanying Australian Guide to Healthy Eating were not well utilised by the respondents. Australian chiropractors often referred patients with nutrition issues to qualified dietitians and other health professionals when deemed necessary.ConclusionsAustralian chiropractors regularly provide nutritional advice and appear to acknowledge the importance of nutrition in their clinical practice especially for patients presenting with chronic disease. If chiropractors are to fulfil their potential in providing such wider public health and preventative health advice to patients, further research examining the utilisation of evidence-based nutrition resources within chiropractic patient management is recommended.

Performance Assessment of a Humidity Measurement System and Its Use to Evaluate Moisture Characteristics of Wheelchair Cushions at the User–Seat Interface

Little is known about the changes in moisture that occur at the body–seat interface during sitting. However, as increased moisture can add to the risk of skin damage, we have developed an array of MEMS (Micro-Electro-Mechanical System) humidity sensors to measure at this interface. Sensors were first evaluated against traceable standards, followed by use in a cross-over field test (n = 11; 20 min duration) using different wheelchair cushions (foam and gel). Relative humidity (RH) was measured at the left mid-thigh, right mid-thigh and coccyx. Sensors were shown to be unaffected by loading and showed highly reliable responses to measured changes in humidity, varying little from the traceable standard (<5%). Field-test data, smoothed through a moving average filter, revealed significant differences between the three chosen locations and between the gel and foam cushions. Maximum RH was attained in less than five minutes regardless of cushion material (foam or gel). Importantly, RH does not appear to distribute uniformly over the body–seat interface; suggesting multiple sensor positions would appear essential for effectively monitoring moisture in this interface. Material properties of the cushions appear to have a significant effect on RH characteristics (profile) at the body–seat interface, but not necessarily the time to peak moisture.