Vinod Vellora Thekkae Padil

Green synthesis of copper oxide nanoparticles using gum karaya as a biotemplate and their antibacterial application

Background Copper oxide (CuO) nanoparticles have attracted huge attention due to catalytic, electric, optical, photonic, textile, nanofluid, and antibacterial activity depending on the size, shape, and neighboring medium. In the present paper, we synthesized CuO nanoparticles using gum karaya, a natural nontoxic hydrocolloid, by green technology and explored its potential antibacterial application. Methods The CuO nanoparticles were synthesized by a colloid-thermal synthesis process. The mixture contained various concentrations of CuCl2 • 2H2O (1 mM, 2 mM, and 3 mM) and gum karaya (10 mg/mL) and was kept at 75°C at 250 rpm for 1 hour in an orbital shaker. The synthesized CuO was purified and dried to obtain different sizes of the CuO nanoparticles. The well diffusion method was used to study the antibacterial activity of the synthesized CuO nanoparticles. The zone of inhibition, minimum inhibitory concentration, and minimum bactericidal concentration were determined by the broth microdilution method recommended by the Clinical and Laboratory Standards Institute. Results Scanning electron microscopy analysis showed CuO nanoparticles evenly distributed on the surface of the gum matrix. X-ray diffraction of the synthesized nanoparticles indicates the formation of single-phase CuO with a monoclinic structure. The Fourier transform infrared spectroscopy peak at 525 cm−1 should be a stretching of CuO, which matches up to the B2u mode. The peaks at 525 cm−1 and 580 cm−1 indicated the formation of CuO nanostructure. Transmission electron microscope analyses revealed CuO nanoparticles of 4.8 ± 1.6 nm, 5.5 ± 2.5 nm, and 7.8 ± 2.3 nm sizes were synthesized with various concentrations of CuCl2 • 2H2O (1 mM, 2 mM, and 3 mM). X-ray photoelectron spectroscopy profiles indicated that the O 1s and Cu 2p peak corresponding to the CuO nanoparticles were observed. The antibacterial activity of the synthesized nanoparticles was tested against Gram-negative and positive cultures. Conclusion The formed CuO nanoparticles are small in size (4.8 ± 1.6 nm), highly stable, and have significant antibacterial action on both the Gram classes of bacteria compared to larger sizes of synthesized CuO (7.8 ± 2.3 nm) nanoparticles. The smaller size of the CuO nanoparticles (4.8 ± 1.6 nm) was found to be yielding a maximum zone of inhibition compared to the larger size of synthesized CuO nanoparticles (7.8 ± 2.3 nm). The results also indicate that increase in precursor concentration enhances an increase in particle size, as well as the morphology of synthesized CuO nanoparticles.

Poly (vinyl alcohol)/gum karaya electrospun plasma treated membrane for the removal of nanoparticles (Au, Ag, Pt, CuO and Fe3O4) from aqueous solutions.

In the present work, nanofibre membranes composed of polyvinyl alcohol (PVA) and a natural gum karaya (GK) hydrocolloid were prepared using electrospinning. The electrospun membranes of PVA/GK were cross-linked with heat treatment and later methane plasma was used to obtain a hydrophobic membrane. The morphology, characterization and adsorption ability of P-NFM was assessed using scanning electron microscopy, UV-vis spectroscopy, ATR-FTIR techniques, water contact angle and ICP-MS analytical methods. The membrane was employed for the extraction of nanoparticles (Ag, Au, Pt, CuO and Fe3O4) from water. The nanoparticle extraction kinetic and adsorption isotherm perform the pseudo-second-order model and Langmuir isotherm model, respectively. The adsorption capacities of the membrane for the removal of NPs from water diverge in the order Pt>Au>Ag>CuO>Fe3O4. The high adsorption efficiency for the removal of NPs from water was compared with an untreated membrane. Physisorption, functional group interactions, complexation reactions between metal/metal oxide nanoparticles with various functional groups present in NFM and modified surface properties such as the balance of hydrophilicity/hydrophobicity, surface free energy, and the high surface area of the plasma treated membrane were possible mechanisms of NPs adsorption onto NFM. The regeneration and reusability were tested in five consecutive adsorption/desorption cycles.

Dodecenylsuccinic Anhydride Derivatives of Gum Karaya (Sterculia urens): Preparation, Characterization, and Their Antibacterial Properties

Esterifications of the tree-based gum, gum karaya (GK), using dodecenylsuccinic anhydride (DDSA) were carried out in aqueous solutions. GK was deacetylated using alkali treatment to obtain deacetylated gum karaya (DGK). The DGK and its DDSA derivative were characterized using gel permeation chromatography/multiangle laser light scattering (GPC/MALLS), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), proton nuclear magnetic resonance spectroscopy ((1)H NMR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) analysis, and rheological studies. The degree of substitution was found to be 10.25% for DGK using (1)H NMR spectroscopy. The critical aggregation concentration of DDSA-DGK was determined using dye solubilization and surface tension methods. The antibacterial activity of the DDSA-DGK derivative was then investigated against Gram-negative Escherichia coli and Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus. The DDSA-DGK derivative has the potential for use as a stabilizing agent in food and nonfood applications. It can also be developed as an antibacterial agent.

Fabrication, characterization, and antibacterial properties of electrospun membrane composed of gum karaya, polyvinyl alcohol, and silver nanoparticles

Gum karaya (GK), a natural hydrocolloid, was mixed with polyvinyl alcohol (PVA) at different weight ratios and electrospun to produce PVA/GK nanofibers. An 80 : 20 PVA/GK ratio produced the most suitable nanofiber for further testing. Silver nanoparticles (Ag-NPs) were synthesised through chemical reduction of AgNO3 (at different concentrations) in the PVA/GK solution, the GK hydroxyl groups being oxidised to carbonyl groups, and Ag+ cations reduced to metallic Ag-NPs. These PVA/GK/Ag solutions were then electrospun to produce nanofiber membranes containing Ag-NPs (Ag-MEMs). Membrane morphology and other characteristics were analysed using scanning electron microscopy coupled with energy dispersive X-ray analysis, transmission electron microscopy, and UV-Vis and ATR-FTIR spectroscopy. The antibacterial activity of the Ag-NP solution and Ag-MEM was then investigated against Gram-negative Escherichia coli and Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus. Our results show that electrospun nanofiber membranes based on natural hydrocolloid, synthetic polymer, and Ag-NPs have many potential uses in medical applications, food packaging, and water treatment.

Plasma modified nanofibres based on gum kondagogu and their use for collection of nanoparticulate silver, gold and platinum

Electrospun nanofibre membranes from blend solutions of deacetylated gum kondagogu and polyvinyl alcohol of various weight proportions were prepared. The electrospun membrane was cross linked by heating at 150°C for 6h and later modified by methane plasma treatment. Membranes were successively used for the removal of nanoparticles (Ag, Au and Pt) from water. Pt nanoparticles with the smallest size (2.4 ± 0.7 nm) has a higher adsorption capacity (270.4 mg/g and 327.2mg/g) compared to Au and Ag nanoparticles with particle sizes 7.8 ± 2.3 nm and 10.5 ± 3.5 nm onto nanofibre membrane (NFM) and methane plasma treated membrane (P-NFM). The extraction efficiency of P-NFM for the removal of nanoparticles in water is higher compared to untreated membranes. The adsorption kinetics were evaluated by pseudo-first order and pseudo-second order models for the extraction of nanoparticles from water, with the pseudo-second order model providing a better fit. The reusability and regeneration of the P-NFM for consecutive adsorption was also established.

Green Synthesis: Nanoparticles and Nanofibres Based on Tree Gums for Environmental Applications

Abstract The recent advances and potential applications of nanoparticles and nanofibres for energy, water, food, biotechnology, the environment, and medicine have immensely conversed. The present review describes a ‘green’ method for the synthesis and stabilization of nanoparticles and ‘green electrospinning’ both using tree gums (arabic, tragacanth, karaya and kondagogu). Furthermore, this review focuses on the impending applications of both gum stabilized nanoparticles and functionalized membranes in remediation of toxic metals, radioactive effluents, and the adsorptive removal of nanoparticulates from aqueous environments as well as from industrial effluents. Besides, the antibacterial properties of gum derivatives, gum stabilized nanoparticles, and functionalized electrospun nanofibrous membranes will also be highlighted. The functionalities of nanofibrous membranes that can be enhanced by various plasma treatments (oxygen and methane, respectively) will also be emphasized.

Electrospun fibers based on Arabic, karaya and kondagogu gums

Nanofibers of natural tree polysaccharides based on three gums namely Arabic (GA), karaya (GK) and kondagogu (KG) have been prepared for the first time using electrospinning. Electrospinning solutions were prepared by mixing gum solutions of GA, GK & KG with eco-friendly polymers such as polyvinyl alcohol (PVA) or polyethylene oxide (PEO). The present study focuses on the effect of electrospinning blended solutions of GA, GK or KG with PVA or PEO, additives which influence system parameters and process parameters. This has important effects on the electrospinning process and the resulting fibers whose morphology and physicochemical properties were evaluated. The mass ratios of 70:30 to 90:10 for PVA: GA, PVA: GK and PVA: KG were observed to establish an optimum blend solution ratio in order to fabricate uniform beadless nanofibers with an average diameter of 240±50, 220±40 and 210±30nm, respectively. Various structural and physicochemical properties of the electrospun fibers were investigated. Furthermore, the comparisons of various functionalities of the untreated and plasma treated electrospun fibers were assessed. The methane plasma treated nanofibers were shown to be of extremely specific surface area, improved water contact angle, high surface porosity and roughness and superior hydrophobic properties compared to untreated fibers.

Hydrocolloid-Stabilized Magnetite for Efficient Removal of Radioactive Phosphates

Liquid radioactive waste is a common by-product when using radioactive isotopes in research and medicine. Efficient remediation of such liquid waste is crucial for increasing safety during the necessary storage of the material. Herein, we present a novel Gum Karaya stabilized magnetite for the efficient removal of radioactive phosphorus 32P from liquid radioactive waste. This environmentally friendly material is well suited to be used as a nanohydrogel for the removal of liquid waste, which can then be stored in a smaller space and without the risk of the spills inherent to the initial liquid material. The maximum adsorption capacity of the GK/M in this study was found to be 15.68 GBq/g. We present a thorough morphological characterization of the synthesised GK/M, as well as a discussion of the possible phosphorus adsorption mechanisms.

Electrospun membrane composed of poly[acrylonitrile-co-(methyl acrylate)-co-(itaconic acid)] terpolymer and ZVI nanoparticles and its application for the removal of arsenic from water

We present a facile approach to immobilizing nanoscale zero valent iron (nZVI) particles onto an electrospun membrane based on poly[acrylonitrile-co-(methyl acrylate)-co-(itaconic acid)] (hereinafter referred to as AN/MA/IA). The nZVI particles were synthesized under a nitrogen atmosphere by reducing Fe(III) cations with sodium borohydride NaBH4 in the presence of an AN/MA/IA membrane as a supporting scaffold. The synthesized nZVI particles are uniformly distributed into the membrane with a mean diameter ranging from 70 to 100 nm. The AN/MA/IA/nZVI membrane was characterized using SEM-EDX, XRD, XPS, TGA, ATR-FTIR, field dependent magnetization measurements using a super conducting quantum interference device (SQUID) magnetometer and Mossbauer spectroscopy. XRD analysis, Mossbauer spectroscopy and magnetization measurements confirmed the presence of the nZVI supported AN/MA/IA membrane, but XPS analysis showed that the surface of the nZVI particles oxidized to iron oxide forms, suggesting a core shell structure of nZVI on the membrane. We show that the composite AN/MA/IA/nZVI membrane can effectively remove As(III) and As(V) from water with a sorption capacity of 46.7 mg g−1 and 46.4 mg g−1 for As(III) and As(V), respectively. Inner-sphere surface complexation, oxidation and reduction reaction, ion exchange, electrostatic repulsion and functional group interaction are discussed as the major mechanisms involved in the arsenic removal by the functionalized membrane. The repeated cycles of adsorption/desorption and regeneration using 0.1 M NaOH signifies the AN/MA/IA/nZVI membrane as an efficient material for the removal of arsenic contamination from water.

TiO2 immobilised on biopolymer nanofibers for the removal of bisphenol A and diclofenac from water

Abstract Recently electrospinning has gained significant attention due to unique possibilities to produce novel natural nanofibers and fabrics with controllable pore structure. The present study focuses on the fabrication of electrospun fibres based on gum karaya (GK), a natural tree gum, with polyvinyl alcohol (PVA), and functionalization of the membrane with TiO2 nanoparticles with further methane plasma treatment. The GK/PVA/TiO2 membrane was analyzed with several techniques including: fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), and water contact angle, in order to characterize its morphological and physicochemical properties. The GK/PVA/TiO2 membrane was further successfully used for the degradation (under UV irradiation) of bisphenol A and diclofenac from aqueous solution. It was also observed that the degradation kinetics of these compounds are faster in comparison to the UV treatment alone.