Virginia Bernabé-Zafón

Photo-polymerized lauryl methacrylate monolithic columns for CEC using lauroyl peroxide as initiator

Lauryl methacrylate (LMA)‐ester based monolithic columns photo‐polymerized using lauroyl peroxide (LPO) as initiator were prepared, and their morphological and CEC properties were studied. The composition of the polymerization mixture (i.e. ratios of monomers/porogenic solvents, 1,4‐butanediol/1‐propanol and LMA/crosslinker) was optimized. The morphological and chromatographic properties of LMA columns were evaluated by means of SEM pictures and van Deemter plots of PAHs, respectively. The polymerization mixture selected as optimal provided a fast separation of a mixture of PAHs with excellent efficiencies (minimum plate heights of 8.9–11.1 μm). Satisfactory column‐to‐column (RSD<4.5%) and batch‐to‐batch reproducibilities (RSD<6.3%) were achieved. The LMA columns photo‐polymerized with LPO were compared with those prepared with AIBN. Using PAHs, alkylbenzenes and basic compounds for testing, the columns obtained with LPO gave the best compromise between efficiency, resolution and analysis time.

Comparison of thermal‐ and photo‐polymerization of lauryl methacrylate monolithic columns for CEC

Lauryl methacrylate‐based (LMA) monolithic columns for CEC, prepared using either thermal initiation or by UV‐irradiation in the presence of AIBN have been compared. Thermal polymerization was carried out at 70°C for 20 h. For UV initiation, the effects of the time exposure to UV light and irradiation energy were investigated. For each initiation process, the influence of composition of porogenic solvent (1,4‐butanediol/1‐propanol ratio) on the physical and electrochromatographic properties of the resulting monoliths was also evaluated. Photochemically lauryl methacrylate stationary phases initiated showed higher permeabilities and better efficiencies than those prepared by thermal initiation. After optimization of polymerization mixture, photopolymerized columns provided a permeability of 4.25×10−13 m2 and a minimum plate height of 13.4 μm for a mixture of polycyclic aromatic hydrocarbons. Similar column‐to‐column and batch‐to‐batch reproducibilities, with RSD values below 11.6 and 11.0 % for the thermal‐ and UV‐initiated columns, respectively, were obtained.

Sensitive determination of polycyclic aromatic hydrocarbons in water samples using monolithic capillary solid-phase extraction and on-line thermal desorption prior to gas chromatography-mass spectrometry.

A methacrylate-based monolithic capillary column has been evaluated for the preconcentration of polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. For this purpose, the monolyte was in situ synthesized in a 6cm×0.32mm id fused-silica capillary. The microextraction unit was fitted to a micro-HPLC pump to pass 10mL of sample. The isolated pollutants were eluted by means of 10μL of methanol, the organic phase being directly collected in a specific interface that can be fitted to the injection port of the gas chromatograph without modification. The interface allows the on-line thermal desorption of the PAHs, avoiding the dilution and providing enough sensitivity to reach the legal limits established for these pollutants in the matrices selected. The limits of detection achieved for 10mL of water ranged between 2.8ng/L (indeno(1,2,3-cd)pyrene) and 11.5ng/L (acenaphthene) with acceptable precision (between 4.5 and 18.2% RSD). The method was applied to the determination of the selected PAHs in tap, river waters and sewage, being fluoranthene and pyrene detected in all of them at concentrations lower than the legal limits established for these compounds in the matrices assayed.

Study of the Fragmentation of D-Glucose and Alkylmonoglycosides in the Presence of Sodium Ions in an Ion-Trap Mass Spectrometer

Abstract Using electrospray ion-trap mass spectrometry, the fragmentation of D-glucose and alkylmonoglycopyranosides (alkyl-GPs) was studied. In the presence of Na+, B1 and 0,2A fragmentations were observed. The alkyl-GPs also showed a 2,5Afragmentation. A cluster containing no carbon atoms and adducts of this cluster with neutral molecules were observed. Standards of alkylmonoglycofuranosides (alkyl-GFs) were not available; however, their fragmentation was studied by high-performace liquid chromatography–mass spectrometry (HPLC-MS) and HPLC-MS2 using an industrial mixture of alkylpolyglycosides. The cluster and its adducts were more easily formed by the alkyl-GPs than by the alkyl-GFs, but the 0,2A cross-ring cleavage was more easily produced by the alkyl-GFs.

Chromium(VI) oxide oxidation of non-ethoxylated and ethoxylated alcohols for determination by electrospray ionization mass spectrometry.

A new derivatization procedure to increase the sensitivity of electrospray ionization mass spectrometry (ESI-MS) to non-ethoxylated and ethoxylated alcohols was investigated. The analytes were oxidized with chromium(VI) oxide and the resulting carboxylic and ethoxy-carboxylic acids were isolated by extraction with ethyl acetate; the extracts were alkalinized and infused into the ESI-MS system working in the negative-ion mode. The yields of the combined oxidation-extraction were ca. 100% for non-ethoxylated fatty alcohols dissolved in acetone and they decreased moderately in samples containing increasing amounts of water (e.g., a 75% yield was obtained with 50% water). Ethoxylated alcohols with more than two ethylene oxide units resulted in yields of ca. 60%. Low limits of detection (LODs) were obtained when the procedure was applied to the analysis of body-care products and cosmetics containing fatty alcohols, e.g., in a varicose-vein cream, the LODs were 25 microg cetyl alcohol and 7.5 microg stearyl alcohol (detected as palmitic acid and stearic acid, respectively) per gram of sample. High molecular mass alcohols were also detected in seawater after pre-concentration by solid-phase extraction. Thus, the proposed method is particularly valuable for use in industrial samples having complex matrices and in environmental samples and it is competitive with other methods for the analysis of trace amounts of fatty alcohols.

Enzyme class identification in cleaning products by hydrolysis followed by derivatization with o-phthaldialdehyde, HPLC and linear discriminant analysis.

The enzymes present in raw materials of the cleaning industry (enzyme industrial concentrates) and in household cleaners were isolated by precipitation with acetone and hydrolyzed with HCl. The resulting amino acids were derivatized with o-phthaldialdehyde, and the derivatives were separated by HPLC. The peaks of 14 amino acids were observed using a C18 column and a multi-segmented gradient of acetonitrile-water in the presence of a 5 mM citric/citrate buffer of pH 6.5. Using either normalized peak areas (divided by the sum of the peak areas of the chromatogram) or ratios of pairs of peak areas as predictor variables, linear discriminant analysis models, capable of predicting the enzyme class, including proteases, lipases, amylases and cellulases, were constructed. For this purpose, both enzyme industrial concentrates and detergent bases spiked with them were included in the training set. In all cases, the enzymes of the evaluation set, including industrial concentrates, spiked detergent bases and commercial cleaners were correctly classified with assignment probabilities higher than 99%.

Separation and determination of alkylglycosides by liquid chromatography with electrospray mass spectrometric detection

The separation of alkylpolyglycosides by liquid chromatography with electrospray mass spectrometric detection, using either an alkylamide or a cyanopropyl column, and acetonitrile/water mixtures as mobile phases, was developed. Using the alkylamide column and isocratic elution, the alpha- and beta-epimers and ring isomers (pyranosides and furanosides) of the alkylmonoglycosides were resolved. The ring isomers were also resolved in a much shorter time using the cyanopropyl column with gradient elution. Using these columns, the isomers of the alkyldiglycosides and alkyltriglycosides were also partially resolved. The equilibration time was much shorter with the cyanopropyl column, which was selected to perform quantitation studies. The response factors increased more than an order of magnitude with the length of the alkyl chain, from the methyl to the decylmonoglycoside, and decrease largely for the dodecyl and tetradecylmonoglycoside. The limits of detection were of ca. 25 microM from the hexyl up to the dodecylmonoglycoside. The procedures were applied to the characterisation and determination of alkylmonoglycosides in toiletries.

Study of elution behaviour with gradient voltage in CEC using methacrylate monolithic columns.

A theoretical study on the retention behaviour and chromatographic performance of neutral solutes using a lauryl methacrylate‐based monolithic column under voltage gradient mode in CEC was carried out. Through a flexible mathematical function based on a modified Gaussian model, the peak shape of compounds was firstly fitted under constant and gradient voltage. Using the peak shape parameters and retention time, the estimation of global chromatographic performance, efficiency and peak capacity under several voltage conditions was performed. The influence of voltage gradient on the separation efficiency is discussed and simple equations are presented to calculate retention and peak widths under voltage gradient conditions. A comparison in terms of chromatographic performance of a test mixture of neutral solutes under constant and gradient voltage modes was also carried out. The experiments carried out under gradient voltage showed better efficiencies (172 000 plates/m) and lower peak widths than those obtained under constant voltage (52 000 plates/m).