Vladimir A. Baulin

Bactericidal activity of black silicon

Black silicon is a synthetic nanomaterial that contains high aspect ratio nanoprotrusions on its surface, produced through a simple reactive-ion etching technique for use in photovoltaic applications. Surfaces with high aspect-ratio nanofeatures are also common in the natural world, for example, the wings of the dragonfly Diplacodes bipunctata. Here we show that the nanoprotrusions on the surfaces of both black silicon and D. bipunctata wings form hierarchical structures through the formation of clusters of adjacent nanoprotrusions. These structures generate a mechanical bactericidal effect, independent of chemical composition. Both surfaces are highly bactericidal against all tested Gram-negative and Gram-positive bacteria, and endospores, and exhibit estimated average killing rates of up to ~450,000 cells min−1 cm−2. This represents the first reported physical bactericidal activity of black silicon or indeed for any hydrophilic surface. This biomimetic analogue represents an excellent prospect for the development of a new generation of mechano-responsive, antibacterial nanomaterials.

Natural Bactericidal Surfaces: Mechanical Rupture of Pseudomonas aeruginosa Cells by Cicada Wings

Natural superhydrophobic surfaces are often thought to have antibiofouling potential due to their self-cleaning properties. However, when incubated on cicada wings, Pseudomonas aeruginosa cells are not repelled; instead they are penetrated by the nanopillar arrays present on the wing surface, resulting in bacterial cell death. Cicada wings are effective antibacterial, as opposed to antibiofouling, surfaces.

Biophysical model of bacterial cell interactions with nanopatterned cicada wing surfaces

The nanopattern on the surface of Clanger cicada (Psaltoda claripennis) wings represents the first example of a new class of biomaterials that can kill bacteria on contact based solely on their physical surface structure. The wings provide a model for the development of novel functional surfaces that possess an increased resistance to bacterial contamination and infection. We propose a biophysical model of the interactions between bacterial cells and cicada wing surface structures, and show that mechanical properties, in particular cell rigidity, are key factors in determining bacterial resistance/sensitivity to the bactericidal nature of the wing surface. We confirmed this experimentally by decreasing the rigidity of surface-resistant strains through microwave irradiation of the cells, which renders them susceptible to the wing effects. Our findings demonstrate the potential benefits of incorporating cicada wing nanopatterns into the design of antibacterial nanomaterials.

Graphene Induces Formation of Pores That Kill Spherical and Rod-Shaped Bacteria

Pristine graphene, its derivatives, and composites have been widely reported to possess antibacterial properties. Most of the studies simulating the interaction between bacterial cell membranes and the surface of graphene have proposed that the graphene-induced bacterial cell death is caused either by (1) the insertion of blade-like graphene-based nanosheets or (2) the destructive extraction of lipid molecules by the presence of the lipophilic graphene. These simulation studies have, however, only take into account graphene-cell membrane interactions where the graphene is in a dispersed form. In this paper, we report the antimicrobial behavior of graphene sheet surfaces in an attempt to further advance the current knowledge pertaining to graphene cytotoxicity using both experimental and computer simulation approaches. Graphene nanofilms were fabricated to exhibit different edge lengths and different angles of orientation in the graphene sheets. These substrates were placed in contact with Pseudomonas aeruginosa and Staphylococcus aureus bacteria, where it was seen that these substrates exhibited variable bactericidal efficiency toward these two pathogenic bacteria. It was demonstrated that the density of the edges of the graphene was one of the principal parameters that contributed to the antibacterial behavior of the graphene nanosheet films. The study provides both experimental and theoretical evidence that the antibacterial behavior of graphene nanosheets arises from the formation of pores in the bacterial cell wall, causing a subsequent osmotic imbalance and cell death.

Selective bactericidal activity of nanopatterned superhydrophobic cicada Psaltoda claripennis wing surfaces

The nanopattern on the surface of Clanger cicada (Psaltoda claripennis) wings represents the first example of a new class of biomaterials that can kill bacteria on contact based solely on its physical surface structure. As such, they provide a model for the development of novel functional surfaces that possess an increased resistance to bacterial contamination and infection. Their effectiveness against a wide spectrum of bacteria, however, is yet to be established. Here, the bactericidal properties of the wings were tested against several bacterial species, possessing a range of combinations of morphology and cell wall type. The tested species were primarily pathogens, and included Bacillus subtilis, Branhamella catarrhalis, Escherichia coli, Planococcus maritimus, Pseudomonas aeruginosa, Pseudomonas fluorescens, and Staphylococcus aureus. The wings were found to consistently kill Gram-negative cells (i.e., B. catarrhalis, E. coli, P. aeruginosa, and P. fluorescens), while Gram-positive cells (B. subtilis, P. maritimus, and S. aureus) remained resistant. The morphology of the cells did not appear to play any role in determining cell susceptibility. The bactericidal activity of the wing was also found to be quite efficient; 6.1 ± 1.5 × 106P. aeruginosa cells in suspension were inactivated per square centimeter of wing surface after 30-min incubation. These findings demonstrate the potential for the development of selective bactericidal surfaces incorporating cicada wing nanopatterns into the design.

Can a Carbon Nanotube Pierce through a Phospholipid Bilayer

Great efficiency to penetrate into living cells is attributed to carbon nanotubes due to a number of direct and indirect observations of carbon nanotubes inside the cells. However, a direct evidence of physical translocation of nanotubes through phospholipid bilayers and the exact microscopic mechanism of their penetration into cells are still lacking. In order to test one of the inferred translocation mechanisms, namely the spontaneous piercing through the membrane induced only by thermal motion, we calculate the energy cost associated with the insertion of a carbon nanotube into a model phospholipid bilayer using the single-chain mean field theory, which is particularly suitable for the accurate measurements of equilibrium free energies. We find that the energy cost of the bilayer rupture is quite high compared to that of the energy of thermal motion. This conclusion may indirectly support other energy-dependent translocation mechanisms, such as, for example, endocytosis.

Nanoparticle-induced permeability of lipid membranes.

Monte Carlo simulations using the bond fluctuation method with explicit solvent reveal the mechanism of enhanced permeability of lipid bilayers induced by the adsorption of nanoparticles with controlled hydrophobicity. Simulation results indicate an adsorption transition of nanoparticles on the bilayer in a certain range of relative degree of hydrophobicity. In this range the nanoparticles can translocate through the bilayer, reversibly destabilizing the structure of the bilayer and inducing enhanced permeability for water and small solutes. This transition is broader for amphiphilic nanoparticles.

Self-consistent field theory of brushes of neutral water-soluble polymers

The self-consistent field theory of brushes of neutral water-soluble polymers described by two-state models is formulated in terms of the effective Flory interaction parameter χeff(T,φ) that depends on both temperature, T, and the monomer volume fraction, φ. The concentration profiles, distribution of free ends and compression force profiles are obtained in the presence and in the absence of a vertical phase separation. A vertical phase separation within the layer leads to a distinctive compression force profile and a minimum in the plot of the moments of the concentration profile versus the grafting density. The analysis is applied explicitly to the Karalstrom model. The relevance to brushes of Poly(N-isopropylacrylamide)(PNIPAM) is discussed.

Differential attraction and repulsion of Staphylococcus aureus and Pseudomonas aeruginosa on molecularly smooth titanium films

Magnetron sputtering techniques were used to prepare molecularly smooth titanium thin films possessing an average roughness between 0.18 nm and 0.52 nm over 5 μm × 5 μm AFM scanning areas. Films with an average roughness of 0.52 nm or lower were found to restrict the extent of P. aeruginosa cell attachment, with less than 0.5% of all available cells being retained on the surface. The attachment of S. aureus cells was also limited on films with an average surface roughness of 0.52 nm, however they exhibited a remarkable propensity for attachment on the nano-smoother 0.18 nm average surface roughness films, with the attachment density being almost twice as great as that observed on the nano-rougher film. The difference in attachment behaviour can be attributed to the difference in morphology of the rod-shaped P. aeruginosa compared to the spherical S. aureus cells.

Surface patterning of carbon nanotubes can enhance their penetration through a phospholipid bilayer.

Nanotube patterning may occur naturally upon the spontaneous self-assembly of biomolecules onto the surface of single-walled carbon nanotubes (SWNTs). It results in periodically alternating bands of surface properties, ranging from relatively hydrophilic to hydrophobic, along the axis of the nanotube. Single-chain mean field (SCMF) theory has been used to estimate the free energy of systems in which a surface patterned nanotube penetrates a phospholipid bilayer. In contrast to unpatterned nanotubes with uniform surface properties, certain patterned nanotubes have been identified that display a relatively low and approximately constant system free energy (<±10 kT) as the nanotube traverses through the bilayer. These observations support the hypothesis that the spontaneous self-assembly of biomolecules on the surface of SWNTs may facilitate nanotube transduction through cell membranes.