Vladimir Aseyev

Non-ionic Thermoresponsive Polymers in Water

Numerous non-ionic thermally responsive homopolymers phase separate from their aqueous solutions upon heating. Far fewer neutral homopolymers are known to phase separate upon cooling. A systematic compilation of the polymers reported to exhibit thermoresponsive behaviour is presented in this review, includ- ing N-substituted poly((meth)acrylamide)s, poly(N-vinylamide)s, poly(oxazoline)s, protein-related polymers, poly(ether)s, polymers based on amphiphilic balance, and elastin-like synthetic polymers. Basic properties of aqueous solutions of these poly- mers are briefly described.

Polyelectrolyte Brushes Grafted from Cellulose Nanocrystals Using Cu-Mediated Surface-Initiated Controlled Radical Polymerization

Herein we report the synthesis of cellulose nanocrystals (CNCs) grafted with poly(acrylic acid) (PAA) chains of different lengths using Cu-mediated surface initiated-controlled radical polymerization (SI-CRP). First, poly(tert-butylacrylate) (PtBA) brushes were synthesized; then, subsequent acid hydrolysis was used to furnish PAA brushes tethered onto the CNC surfaces. The CNCs were chemically modified to create initiator moieties on the CNC surfaces using chemical vapor deposition (CVD) and continued in solvent phase in DMF. A density of initiator groups of 4.6 bromine ester groups/nm(2) on the CNC surface was reached, suggesting a dense functionalization and a promising starting point for the controlled/living radical polymerization. The SI-CRP of tert-butylacrylate proceeded in a well-controlled manner with the aid of added sacrificial initiator, yielding polymer brushes with polydispersity values typically well below 1.12. We calculated the polymer brush grafting density to almost 0.3 chains/nm(2), corresponding to high grafting densities and dense polymer brush formation on the nanocrystals. Successful rapid acid hydrolysis to remove the tert-butyl groups yielded pH-responsive PAA-polyelectrolyte brushes bound to the CNC surface. Individually dispersed rod-like nanoparticles with brushes of PtBA or PAA were clearly visualized by AFM and TEM imaging.

Thermal aggregation of bovine serum albumin studied by asymmetrical flow field-flow fractionation.

The use of asymmetrical flow field-flow fractionation (AsFlFFF) in the study of heat-induced aggregation of proteins is demonstrated with bovine serum albumin (BSA) as a model analyte. The hydrodynamic diameter (d(h)), the molar mass of heat-induced aggregates, and the radius of gyration (R(g)) were calculated in order to get more detailed understanding of the conformational changes of BSA upon heating. The hydrodynamic diameter of native BSA at ambient temperature was approximately 7 nm. The particle size was relatively stable up to 60 degrees C; above 63 degrees C, however, BSA underwent aggregation (growth of hydrodynamic diameter). The hydrodynamic diameters of the aggregated particles, heated to 80 degrees C, ranged from 15 to 149 nm depending on the BSA concentration, duration of incubation, and the ionic strength of the solvent. Heating of BSA in the presence of sodium dodecyl sulfate (1.7 or 17 mM) did not lead to aggregation. The heat-induced aggregates were characterized in terms of their molar mass and particle size together with their respective distributions with a hyphenated technique consisting of an asymmetrical field-flow fractionation device and a multi-angle light scattering detector and a UV-detector. The carrier solution comprised 8.5 mM phosphate and 150 mM sodium chloride at pH 7.4. The weight-average molar mass (M(w)) of native BSA at ambient temperature is 6.6x10(4) g mol(-1). Incubation of solutions with BSA concentrations of 1.0 and 2.5 mg mL(-1) at 80 degrees C for 1 h resulted in aggregates with M(w) 1.2x10(6) and 1.9x10(6) g mol(-1), respectively. The average radius of gyration and the average hydrodynamic radius of the heat-induced aggregate samples were calculated and compared to the values obtained from the size distributions measured by AsFlFFF. For comparison static light scattering measurements were carried out and the corresponding average molar mass distributions of solutions with BSA concentrations of 1.0 and 2.5 mg mL(-1) at 80 degrees C for 1 h gave aggregates with M(w) 1.7x10(6) and 3.5x10(6) g mol(-1), respectively.

Miktoarm stars of poly(ethylene oxide) and poly(dimethylaminoethyl methacrylate): manipulation of micellization by temperature and light

A novel method for preparation of miktoarm stars is presented, first employing Williamson ether synthesis with protected dipentaerythritol and preformed poly(ethylene oxide) (PEO) as reactants. This arm-first reaction gave, after modification, PEO macroinitiators with 4 or 6 initiation sites, which are located in the center of the main chain. The initiators were used for atom transfer radical polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA; core-first method). Heteroarm stars were obtained with two hydrophilic PEO chains and 4 or 3 stimuli responsive PDMAEMA chains respectively. Both polymers had almost the same molecular weights. The star-shaped polymers were analyzed by NMR, size exclusion chromatography SEC, osmometry and mass spectrometry. The micellization of the polymers was investigated by light scattering, fluorescence spectroscopy and cryogenic transmission electron microscopy. At the conditions used (0.1 g/L in pH 8 buffer), PDMAEMA turns hydrophobic around 55 °C, forming micelles at higher temperatures. At low temperature, trivalent counterions like hexacyanocobaltate(III) allow additional micellization of the weak polyelectrolyte PDMAEMA, with PEO as the solubilizing agent. For this unique behavior the notion “confused micellization” is introduced, which is in analogy to schizophrenic micelles. The morphology of the aggregates depends strongly on the macromolecular architecture, giving spherical micelles for the star with 4 shorter PDMAEMA arms and vesicles for the star with 3 longer arms. The diameter of the vesicles, varying between 200 nm and 4000 nm at 10 °C, can be tuned by the cooling rate. This ionically induced micellization can then be reversed by UV-illumination, leading to disaggregation upon a photoinduced valency change of the counterion.

Cationic Amphiphilic Star and Linear Block Copolymers: Synthesis, Self-Assembly, and in Vitro Gene Transfection

A series of amphiphilic star and linear block copolymers were synthesized using ATRP. The core consisted of either polystyrene (PS) or poly(n-butyl acrylate) (PBuA), having different glass-transition (T(g)) values. These polymers were used as macroinitiators in the polymerization of the cationic 2-(dimethylamino)ethyl methacrylate (DMAEMA). The polymers were used to study the effects of polymer architecture and flexibility on the self-assembling properties, DNA complexation, and transfection. All polymers formed core-shell micelles in aqueous solutions and condensed plasmid DNA. Linear PDMAEMA-PBuA-PDMAEMA has transfection efficiency comparable to PEI25K in ARPE19 cell line. Glassy state of the micellar core and star-shaped architecture decreased the DNA transfection compared with the rubbery and linear polymer structures. The polymers showed low cellular toxicity at low nitrogen/phosphate (n/p) ratios.

Supracolloidal Multivalent Interactions and Wrapping of Dendronized Glycopolymers on Native Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) are high aspect ratio colloidal rods with nanoscale dimensions, attracting considerable interest recently due to their high mechanical properties, chirality, sustainability, and availability. In order to exploit them for advanced functions in new materials, novel supracolloidal concepts are needed to manipulate their self-assemblies. We report on exploring multivalent interactions to CNC surface and show that dendronized polymers (DenPols) with maltose-based sugar groups on the periphery of lysine dendrons and poly(ethylene-alt-maleimide) polymer backbone interact with CNCs. The interactions can be manipulated by the dendron generation suggesting multivalent interactions. The complexation of the third generation DenPol (G3) with CNCs allows aqueous colloidal stability and shows wrapping around CNCs, as directly visualized by cryo high-resolution transmission electron microscopy and electron tomography. More generally, as the dimensions of G3 are in the colloidal range due to their ~6 nm lateral size and mesoscale length, the concept also suggests supracolloidal multivalent interactions between other colloidal objects mediated by sugar-functionalized dendrons giving rise to novel colloidal level assemblies.

Mechanisms of polyethylenimine-mediated DNA delivery: free carrier helps to overcome the barrier of cell-surface glycosaminoglycans

Polyethylenimine (PEI) polyplexes mediate efficient gene transfer only at high +/− charge ratios at which free noncomplexed PEI is present. The excess of PEI gives polyplexes a positive surface charge that plays a role in polyplex binding on the cell membrane. Although positively charged PEI polyplexes are known to interact with anionic cell‐surface glycosaminoglycans (GAGs), the exact role of free PEI in such interactions is unclear.

Hydrophobication and characterisation of O-acetyl-galactoglucomannan for papermaking and barrier applications

Norway spruce O-acetyl-galactoglucomannans (GGM) are water-soluble hemicelluloses that have potential to be produced in large scale as a side product of the mechanical pulping industry or by hot-water extraction of wood. Chemical modification is often needed to tailor such water-soluble polysaccharides into industrially valuable compounds. In this work, treatment of GGM with butyric and benzoic anhydride in pyridine/dimethylformamide rendered GGM derivatives, which were hydrophobic and partially soluble in organic solvents. The degree of substitution can be adjusted by varying the quantity of the reagent and reaction temperature. The dn/dc value for the benzoyl ester of GGM was determined in 0.05 M LiBr DMSO in order to obtain accurate molar mass analysis with SEC-MALLS-RI. Novel substances with adjusted hydrophobicity can thus be prepared on one step synthesis from natural hemicelluloses, which then showed a slight increase in the molar mass upon esterification.

Structural comparison of arabinoxylans from two barley side-stream fractions.

The structures of barley ( Hordeum vulgare) arabinoxylans isolated from two industrial side fractions, barley husks (BH) and barley fiber (BF), were characterized. Arabinoxylans were extracted with saturated barium hydroxide after enzymatic pretreatment. Barium hydroxide was selective toward arabinoxylans, and only a minor amount of glucose-containing material was coextracted. Acid methanolysis followed by gas chromatography, 1H NMR spectroscopy, and specific enzymatic treatments followed by anion exchange chromatography with pulse amperometric detection (HPAEC-PAD) revealed that the chemical structure of barley husk arabinoxylan (BHAX) clearly differed from that of barley fiber arabinoxylan (BFAX). BFAX was more branched, containing more beta-D-xylopyranosyl (beta-D-Xylp) residues carrying alpha-L-arabinofuranosyl (alpha-L-Araf) units at both O-2 and O-3 positions. BHAX, on the other hand, contained more 2-O-beta-D-Xyl p-alpha-L-Ara f substituents than BFAX. BHAX and BFAX also differed with respect to the hydrodynamic properties investigated with multidetector size exclusion chromatography. BFAX had a higher weight-average molar mass and larger hydrodynamic volume, the latter indicating less dense conformation than BHAX. Mn, Mw /Mn, Rh, and the Mark-Houwink a value were also determined for both arabinoxylans.

Thermoresponsive Nanoparticles of Self-Assembled Block Copolymers as Potential Carriers for Drug Delivery and Diagnostics

Thermally responsive hydrogel nanoparticles composed of self-assembled polystyrene-b-poly(N-isopropylacrylamide)-b-polystyrene block copolymers and fluorescent probe 1-anilinonaphthalene-8-sulfonic acid have been prepared by aerosol flow reactor method. We aimed exploring the relationship of intraparticle morphologies, that were, PS spheres and gyroids embedded in PNIPAm matrix, as well PS-PNIPAm lamellar structure, to probe release in aqueous solution below and above the cloud point temperature (CPT) of PNIPAm. The release was detected by fluorescence emission given by the probe binding to bovine serum albumin. Also, the colloidal behavior of hydrogel nanoparticles at varying temperatures were examined by scattering method. The probe release was faster below than above the CPT from all the morphologies of which gyroidal morphology showed the highest release. Colloidal behavior varied from single to moderately aggregated particles in order spheres-gyroids-lamellar. Hydrogel nanoparticles with tunable intra particle self-assembled morphologies can be utilized designing carrier systems for drug delivery and diagnostics.