W. Matthew Reichert

Characterization and comparison of hydrophilic and hydrophobic room temperature ionic liquids incorporating the imidazolium cation

A series of hydrophilic and hydrophobic 1-alkyl-3-methylimidazolium room temperature ionic liquids (RTILs) have been prepared and characterized to determine how water content, density, viscosity, surface tension, melting point, and thermal stability are affected by changes in alkyl chain length and anion. In the series of RTILs studied here, the choice of anion determines water miscibility and has the most dramatic effect on the properties. Hydrophilic anions (e.g., chloride and iodide) produce ionic liquids that are miscible in any proportion with water but, upon the removal of some water from the solution, illustrate how sensitive the physical properties are to a change in water content. In comparison, for ionic liquids containing more hydrophobic anions (e.g., PF6− and N(SO2CF3)2−), the removal of water has a smaller affect on the resulting properties. For a series of 1-alkyl-3-methylimidazolium cations, increasing the alkyl chain length from butyl to hexyl to octyl increases the hydrophobicity and the viscosities of the ionic liquids increase, whereas densities and surface tension values decrease. Thermal analyses indicate high temperatures are attainable prior to decomposition and DSC studies reveal a glass transition for several samples. ILs incorporating PF6− have been used in liquid/liquid partitioning of organic molecules from water and the results for two of these are also discussed here. On a cautionary note, the chemistry of the individual cations and anions of the ILs should not be overlooked as, in the case of certain conditions for PF6− ILs, contact with an aqueous phase may result in slow hydrolysis of the PF6− with the concomitant release of HF and other species.

Task-specific ionic liquids for the extraction of metal ions from aqueous solutions

Imidazolium cations, such as those commonly used in preparing ionic liquids (ILs) can easily be derivatized to include task-specific functionality, such as metal ligating groups that when used as part of the solvent or doped into less expensive ILs, dramatically enhance the partitioning of targeted metal ions into the IL phase from water; the strategy of preparing task-specific ILs is applicable to a wide range of designer solvent needs.

Crystal polymorphism in 1-butyl-3-methylimidazolium halides: supporting ionic liquid formation by inhibition of crystallizationElectronic supplementary information (ESI) available: packing diagrams for I and II; table of closest contacts for I, I-Br and II. See http://www.rsc.org/suppdata/cc/b3/b304543a/

Crystallization of 1-butyl-3-methylimidazolium chloride from mixed ionic liquid or ionic liquid–aromatic solution, and from the melt yields different crystalline polymorphs, the first direct evidence for inhibition of crystallization in ionic liquids by polymorphism.

Crystal structures of imidazolium bis(trifluoromethanesulfonyl)imide ‘ionic liquid’ salts: the first organic salt with a cis-TFSI anion conformation

Crystal structures of two examples of an important class of ionic liquids, 1,3-dimethylimidazolium and 1,2,3-triethylimidazolium bis(trifluoromethanesulfonyl)imide have been characterized by single crystal X-ray diffraction. The anion in the 1,3-dimethylimidazolium example (mp 22 degrees C), adopts an unusual cis-geometry constrained by bifurcated cation-anion C-H. . .O hydrogen-bonds from the imidazolium cation to the anion resulting in the formation of fluorous layers within the solid-state structure. In contrast, in the 1,2,3-triethylimidazolium salt (mp 57 degrees C), the ions are discretely packed with only weak C-H. . .O contacts between the ions close to the van der Waals separation distances, and with the anion adopting the twisted conformation observed for all other examples from the limited set of organic bis(trifluoromethanesulfonyl)imide crystal structures. The structures are discussed in terms of the favorable physical properties that bis(trifluoromethanesulfonyl)imide anions impart in ionic liquids.

Ionic liquids with dual biological function: sweet and anti-microbial, hydrophobic quaternary ammonium-based salts

The dual nature of ionic liquids has been exploited to synthesize materials that contain two independent biological functions by combining anti-bacterial quaternary ammonium compounds with artificial sweetener anions. The synthesis and physical properties of eight new ionic liquids, didecyldimethylammonium saccharinate ([DDA][Sac]), didecyldimethylammonium acesulfamate ([DDA][Ace]), benzalkonium saccharinate ([BA][Sac]), benzalkonium acesulfamate ([BA][Ace]), hexadecylpyridinium saccharinate ([HEX][Sac]), hexadecylpyridinium acesulfamate ([HEX][Ace]), 3-hydroxy-1-octyloxymethylpyridinium saccharinate ([1-(OctOMe)-3-OH-Py][Sac]), and 3-hydroxy-1-octyloxymethylpyridinium acesulfamate ([1-(OctOMe)-3-OH-Py][Ace]), are reported, as well as the single crystal structures for [HEX][Ace] and [1-(OctOMe)-3-OH-Py][Sac]. Determination of anti-microbial activities is described for six of the ILs. While some exhibited decreased anti-microbial activity others showed a dramatic increase. For two of the ionic liquids, [DDA][Sac] and [DDA][ACE], oral toxicity, skin irritation, and deterrent activity was also established. Unfortunately, both ILs received a Category 4 (harmful) rating for oral toxicity and skin irritation. However, deterrent activity experiments point to use as an insect deterrent, as both ILs scored either “very good” or “good” against several types of insects.

Mercury(ii) partitioning from aqueous solutions with a new, hydrophobic ethylene-glycol functionalized bis-imidazolium ionic liquidThis work was presented at the Green Solvents for Catalysis Meeting held in Bruchsal, Germany, 13–16th October 2002.

A room temperature ionic liquid containing a bis-imidazolium cation incorporating a short ethylene-glycol spacer, 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)] bis[3-methyl-1H-imidazolium-1-yl]bis(trifluoromethanesulfonyl)imide, has been prepared from the corresponding chloride salt, and the X-ray crystal structure of the low-melting hexafluorophosphate salt has been determined. The crystal structure reveals the ether linkage to be quite flexible and to participate in strong C2–H⋯O hydrogen bonds leading to asymmetry. The crystal structure of the bis-imidazolium salt incorporating a decyl-spacer, 1,1′-[1,10-decyl]bis[3-methyl-1H-imidazolium-1-yl] hexafluorophosphate, has also been determined and displays an all-trans (symmetric) conformation except at the beta carbon positions where a characteristic kink is observed. Introducing the ethylene-glycol functionality dramatically increases the distribution ratio of mercury ions, but not caesium, from aqueous solution to the hydrophobic ionic liquid, and from basic solution. This is the first example of pH dependent partitioning and stripping of mercury from ionic liquid/aqueous two-phase systems. The crystal structure of the related mercury(II) carbene complex, obtained from the reaction of mercury(II) acetate with 1,1′-[oxybis(2,1-ethanediyloxy-2,1-ethanediyl)]bis[3-methyl-1H-imidazolium-1-yl] tosylate, containing a three-ether spacer, in acetonitrile, reveals the possibility of a carbene extraction mechanism.

Liquid clathrate formation in ionic liquid-aromatic mixtures

1-Alkyl-3-methylimidazolium containing ionic liquids with hexafluorophosphate, bis(trifyl)imide, tetrafluoroborate, and chloride anions form liquid clathrates when mixed with aromatic hydrocarbons; in the system 1,3-dimethylimidazolium hexafluorophosphate-benzene, the aromatic solute could be trapped in the solid state forming a crystalline 2:1 inclusion compound.

Ionic liquids via reaction of the zwitterionic 1,3-dimethylimidazolium-2-carboxylate with protic acids. Overcoming synthetic limitations and establishing new halide free protocols for the formation of ILs

The previously reported preparation of 1,3-dimethylimidazolium salts by the reaction of 1,3-dialkylimidazolium-2-carboxylate zwitterions with protic acids has been reinvestigated in detail, leading to the identification of two competing reactions: isomerisation and decarboxylation. The ability to control both pathways allows this methodology to be used as an effective, green, waste-free approach to readily prepare a wide range of ionic liquids in high yields. Additionally, this reaction protocol opens new possibilities in the formation of other imidazolium salts, whose syntheses were previously either very expensive (due to ion exchange protocols involving metals like Ag) or difficult to achieve (due to multiple extractions and large quantities of hard to remove inorganic by-products).

New ionic liquids containing an appended hydroxyl functionality from the atom-efficient, one-pot reaction of 1-methylimidazole and acid with propylene oxide

New ionic liquids containing (2-hydroxypropyl)-functionalized imidazolium cations have been synthesized by the atom-efficient, room temperature reaction of 1-methylimidazole with acid and propylene oxide; the acid providing the anionic component of the resultant ionic liquids. The incorporation of the secondary hydroxyl-functionality in the cation causes some interesting modifications to the behavior of these ionic liquids, increasing hydrophilicity and resulting in the unprecedented formation of liquid–liquid biphases with acetone. The single crystal structure of 1-(2-hydroxypropyl)-3-methylimidazolium tetraphenylborate, prepared by metathesis of the corresponding chloride-containing ionic liquid, has also been determined.

Strategies toward the design of energetic ionic liquids: nitro- and nitrile-substituted N,N′-dialkylimidazolium salts

Twelve novel 1,3-dialkylimidazolium salts containing strongly electron-withdrawing nitro- and cyano-functionalities directly appended to the cationic heterocyclic rings have been synthesized; the influences of the substituents on both formation and thermal properties of the resultant ionic liquids have been determined by DSC, TGA, and single crystal X-ray diffraction, showing that an electron-withdrawing nitro-substituent can be successfully appended and has a similar influence on the melting behaviour as that of corresponding methyl group substitution. Synthesis of di-, or trinitro-substituted 1,3-dialkylimidazolium cations was unsuccessful due to the resistance of dinitro-substituted imidazoles to undergo either N-alkylation or protonation, while 1-alkyl-4,5-dicyanoimidazoles were successfully alkylated to obtain 1,3-dialkyl-4,5-dicyanoimidazolium salts. Five crystal structures (one of each cation type) show that, in the solid state, the NO2-group has little significant effect, beyond the steric contribution, on the crystal packing.