W. Stuart Dols

Using CFD Capabilities of CONTAM 3.0 for Simulating Airflow and Contaminant Transport in and around Buildings

CONTAM is a multizone building airflow and contaminant transport computer program often used for ventilation and indoor air quality analysis. The program was recently enhanced to incorporate CFD capabilities for both outdoor and indoor environmental analysis. This paper introduces the CFD features implemented within the most recent version, CONTAM 3.0. The outdoor or external CFD link predicts wind pressure coefficients and contaminant concentrations for airflow paths at the building surface. A converter computer program translates the wind pressure coefficients to the CONTAM data format. This external CFD link is useful for parametric studies of the impact of outdoor air quality on indoor environment when considering different wind directions or contaminant locations, especially simulations under transient conditions. The ability to embed a single CFD zone in a CONTAM network model has also been implemented. This enables the detailed modeling of a zone when the well-mixed multizone assumption is not appropriate and then uses the multizone approach for the rest of a building, thus capturing the local distribution of air and contaminant properties in a zone and their impacts on other zones of a building. CFD capabilities are demonstrated using a generic residential house model to show how these two new CFD features enhance the existing CONTAM capabilities for both indoor and outdoor air quality analysis.

Simultaneous solutions of coupled thermal airflow problem for natural ventilation in buildings

Natural and hybrid ventilation can be sustainable building ventilation strategies, where airflow is driven naturally by thermal buoyancy and/or wind forces other than pure mechanical means. The simulation and design of these systems need to consider the combined impact of thermal and airflow transport behaviors. The numerical solution of such combined thermal airflow problems often employs a segregate and iterative approach. Either the air temperatures in the thermal problem or the air pressures in the airflow problem are solved separately with the other parameter known from a previous iteration. The newly solved parameters are then substituted successively into the other calculation. For highly coupled thermal airflow problems, the segregate method can cause solution fluctuation or even divergence when relaxation factors are not carefully selected to avoid abrupt changes of air parameters in the successive substitution procedure. This article investigated two nonsegregate methods to solve thermal and airflow problems simultaneously. In the fully simultaneous method, air temperatures and pressures for all rooms of a building are solved simultaneously using a single Jacobian matrix. In the semi-simultaneous method, a Jacobian matrix for the air temperature and pressure of one room is solved when air temperatures and pressures of other rooms are kept as constants. The same procedure is then repeated for each room of a building. In both cases, relaxation factors are not required. The simultaneous solution methods are demonstrated for a two-zone building with thermal buoyancy-driven flows and validated for an experimental study of combined wind and buoyancy forces in a light well. It was shown that the simultaneous solvers provide stable solutions without using any relaxation in both cases. The predicted results also agree reasonably well with the experimental data.

Development and application of an updated whole-building coupled thermal, airflow and contaminant transport simulation program (TRNSYS/CONTAM)

The TRNSYS energy analysis tool has been capable of simulating whole-building coupled heat transfer and building airflow for about 10 years. The most recent implementation was based on two TRNSYS modules, Type 56 and Type 97. Type 97 is based on a subset of the airflow calculation capabilities of the CONTAM multizone airflow and contaminant transport program developed by the National Institute of Standards and Technology. This paper describes the development of new CONTAM capabilities in support of an updated combined, multizone building heat transfer, airflow and contaminant transport simulation approach using TRNSYS. It presents an illustrative case that highlights the new coupling capability and also presents the application of this coupled simulation approach to a practical design problem of the energy use related to airflow through entry doors in non-residential buildings.

Using coupled energy, airflow and indoor air quality software (TRNSYS/CONTAM) to evaluate building ventilation strategies:

Building energy analysis tools are available in many forms that provide the ability to address a broad spectrum of energy-related issues in various combinations. Often these tools operate in isolation from one another, making it difficult to evaluate the interactions between related phenomena and interacting systems, forcing oversimplified assumptions to be made about various phenomena that could otherwise be addressed directly with another tool. One example of such interdependence is the interaction between heat transfer, inter-zone airflow, and indoor contaminant transport. To better address these interdependencies, the National Institute of Standards and Technology has developed an updated version of the multi-zone airflow and contaminant transport modeling tool, CONTAM, along with a set of utilities to enable coupling of the full CONTAM model with the TRNSYS simulation tool in a more seamless manner and with additional capabilities that were previously not available. This article provides an overview of these new capabilities and applies them to simulating a medium-size office building. These simulations address the interaction between whole-building energy, airflow, and contaminant transport in evaluating various ventilation strategies including natural and demand-controlled ventilation. Practical application: CONTAM has been in practical use for many years allowing building designers, as well as indoor air quality (IAQ) and ventilation system analysts, to simulate the complex interactions between building physical layout and HVAC system configuration in determining building airflow and contaminant transport. It has been widely used to design and analyze smoke management systems and evaluate building performance in response to chemical, biological, and radiological events. While CONTAM has been used to address design and performance of buildings implementing energy conserving ventilation systems, e.g. natural and hybrid, this new coupled simulation capability will enable users to apply the tool to couple CONTAM with existing energy analysis software to address the interaction between IAQ considerations and energy conservation measures in building design and analysis. This article presents two practical case studies using the coupled modeling tool to evaluate IAQ performance of a CO2-based demand-controlled ventilation system under different levels of building envelope air tightness and the design and analysis of a natural ventilation system.

Weather Correlations to Calculate Infiltration Rates for U.S Commercial Building Energy Models

As building envelope performance improves, a greater percentage of building energy loss will occur through envelope leakage. Although the energy impacts of infiltration on building energy use can be significant, current energy simulation software have limited ability to accurately account for envelope infiltration and the impacts of improved airtightness. This paper extends previous work by the National Institute of Standards and Technology that developed a set of EnergyPlus inputs for modeling infiltration in several commercial reference buildings using Chicago weather. The current work includes cities in seven additional climate zones and uses the updated versions of the prototype commercial building types developed by the Pacific Northwest National Laboratory for the U. S. Department of Energy. Comparisons were made between the predicted infiltration rates using three representations of the commercial building types: PNNL EnergyPlus models, CONTAM models, and EnergyPlus models using the infiltration inputs developed in this paper. The newly developed infiltration inputs in EnergyPlus yielded average annual increases of 3 % and 8 % in the HVAC electrical and gas use, respectively, over the original infiltration inputs in the PNNL EnergyPlus models. When analyzing the benefits of building envelope airtightening, greater HVAC energy savings were predicted using the newly developed infiltration inputs in EnergyPlus compared with using the original infiltration inputs. These results indicate that the effects of infiltration on HVAC energy use can be significant and that infiltration can and should be better accounted for in whole-building energy models.

Evaluating indoor air quality and energy impacts of ventilation in a net-zero energy house using a coupled model

The National Institute of Standards and Technology constructed the Net-Zero Energy Residential Test Facility to support the development and adoption of cost-effective net-zero energy designs and technologies. In support of indoor air quality goals, contaminant source control approaches were implemented that minimized the use of products containing urea-formaldehyde resin and utilized products with relatively low volatile organic compound emissions. Indoor and outdoor concentrations of formaldehyde and acetaldehyde were approximately measured monthly for 15 months. Independent emission measurements of formaldehyde were made in a small chamber system to determine the emission rates from samples of the wood flooring, plywood, and wood cabinetry taken from the house. Blower door tests were performed to determine the leakage area of the exterior envelope, the interior floors, and transfer grilles between floors. Real-time formaldehyde concentration and energy measurements were used to verify the indoor concentrations and energy predictions of a coupled CONTAM-EnergyPlus model of the house. The verified model was then used to evaluate the impacts of different outdoor air ventilation rates on indoor concentrations and energy. The current work demonstrates the need for consideration of source control options during product selection and the provision of mechanical ventilation, especially in homes with relatively airtight envelopes.

Model validation study of carbon monoxide transport due to portable electric generator operation in an attached garage

A series of tests was conducted to characterize the indoor carbon monoxide (CO) concentrations resulting from portable electric generators operating in the attached garage of a test house under various use and environmental conditions. An extensive model validation effort using the multizone airflow and indoor air quality (IAQ) model CONTAM was carried out using the data from seven tests with a generator operating in the attached garage to compare predicted CO concentrations with measured values. The agreement between the measurements and predictions of the O2 concentrations in the garage and the average CO concentration for the house zones was excellent for the data set as a whole. The agreement was somewhat worse for the garage CO concentrations. Overall, the house zone average and garage CO concentration predictions and measurements were within about 20% and 30%, respectively, when averaged over all cases.

Development and Demonstration of a Method to Evaluate Bio-Sampling Strategies Using Building Simulation and Sample Planning Software.

In an effort to validate and demonstrate response and recovery sampling approaches and technologies, the U.S. Department of Homeland Security (DHS), along with several other agencies, have simulated a biothreat agent release within a facility at Idaho National Laboratory (INL) on two separate occasions in the fall of 2007 and the fall of 2008. Because these events constitute only two realizations of many possible scenarios, increased understanding of sampling strategies can be obtained by virtually examining a wide variety of release and dispersion scenarios using computer simulations. This research effort demonstrates the use of two software tools, CONTAM, developed by the National Institute of Standards and Technology (NIST), and Visual Sample Plan (VSP), developed by Pacific Northwest National Laboratory (PNNL). The CONTAM modeling software was used to virtually contaminate a model of the INL test building under various release and dissemination scenarios as well as a range of building design and operation parameters. The results of these CONTAM simulations were then used to investigate the relevance and performance of various sampling strategies using VSP. One of the fundamental outcomes of this project was the demonstration of how CONTAM and VSP can be used together to effectively develop sampling plans to support the various stages of response to an airborne chemical, biological, radiological, or nuclear event. Following such an event (or prior to an event), incident details and the conceptual site model could be used to create an ensemble of CONTAM simulations which model contaminant dispersion within a building. These predictions could then be used to identify priority area zones within the building and then sampling designs and strategies could be developed based on those zones.