Walter Costin

Application of SEM-EBSD for Measurement of Plastic Strain Fields Associated With Weld Metal Hydrogen Assisted Cold Cracking

The requirement for more efficient use of materials for pipelines has lead to the application of high strength low alloy steels such as X70 and X80 in pipelines. As the strength of these alloys has increased so has the risk of hydrogen assisted cold cracking (HACC). In Australia to minimize construction time, the root runs of girth welds are produced by shielded metal arc welding using cellulosic electrodes without either pre or post heating. Well defined welding criteria have been developed and are incorporated into the weld procedures for the elimination of HACC in the heat affected zone but the risk of cracking to the weld metal is still of concern.It has been reported that plastic deformation occurs prior to the formation of hydrogen cracks in weld metal. Therefore the evaluation of plastic strains at the micro- and nano-scale and their relationship to the weld metal microstructure could be of great significance in assessing the susceptibility of welds to weld metal hydrogen assisted cold cracking (WMHACC).A method for analysing plastic strains on the micro- and nano-scales using electron backscattered diffraction (EBSD) has been developed. This technique is based on the degradation and rotation of diffraction patterns as a result of crystallographic lattice distortion resulting from plastic deformation. The analysis can be automated to produce an Image Quality (IQ) map in order to relate the spatial distribution of plastic deformation to microstructural features e.g. grains or cracks.The development and assessment of techniques using Scanning Electron Microscopy (SEM) and EBSD for the determination of local plastic strain distribution in E8010 weld metal used for the root pass of X70 pipeline girth welds is discussed.Copyright

Susceptibility of Acicular Ferrite and Upper Bainite Microstructures to Hydrogen Assisted Cold Cracking Propagation

Acicular ferrite (AF) and upper bainite (UB) are microstructural constituents commonly found in ferritic weld metals. Both microstructures are formed within a similar temperature range and by the same type of transformation mechanisms. They have however, substantially different morphologies and microstructural features that govern both their mechanical properties and hydrogen embrittlement susceptibility. This work shows that despite substantial microstructural differences, the mechanical properties of both microstructural constituents were quite similar. However, the microstructural differences were found to significantly affect the hydrogen crack propagation resistance. Hydrogen assisted cold cracking (HACC) propagates along a path of least resistance through the surrounding microstructure. The unit crack path was significantly shorter for AF than for UB, which implied more frequent changes in direction and thus increased dissipation of energy from the crack driving force. These results suggest that AF, possessing fine interlocking grains and high angle grain boundaries (HAGB), increases the localised resistance to HACC propagation more than UB due to the impediment of brittle, cleavage-like crack propagation at HAGB’s.

Characterisation of Fracture and HAC Resistance of an Individual Microstructural Constituent with Micro-Cantilever Testing

This paper focuses on the application of miniaturized fracture tests to evaluate the fracture and hydrogen assisted cracking (HAC) resistance of a selected microstructural constituent (acicular ferrite, AF) which only occurs in microscopic material volumes. Site-specific Focused Ion Beam (FIB) micro-machining was used to fabricate sharply notched micro-cantilevers into a region fully constituting of AF. The micro-cantilevers were subsequently tested under uncharged and hydrogen charged conditions with a nanoindenter. The load displacement curves were recorded and analysed with a simplified plastic hinge model for the uncharged specimen, as AF demonstrated an essentially ductile behaviour. The simplified model assisted with FE simulations provided values of the critical plastic crack tip opening displacement (CTOD). A value of the conditional fracture toughness was thereby determined as 12.1 MPa m1/2. With LEFM, a threshold stress intensity factor, Kth, to initiate hydrogen crack propagation in AF was found to range between 1.56 MPa m1/2 and 4.36 MPa m1/2. All these values were significantly below the corresponding values reported for various ferrous alloys in standard macro-tests. This finding indicates that the fracture and HAC resistance at the micro-scale could be very different than at the macro-scale as not all fracture toughening mechanisms may be activated at this scale level.

Testing localized microstructural architectures with miniaturised cantilever beams

The fracture resistance of many alloys is largely determined by their microstructure which may consist of diverse constituents with characteristic architectures and fracture properties. However, the fracture properties of individual microscopic constituents cannot be directly measured with conventional mechanical tests. Micro-fracture testing is a powerful tool to overcome such experimental limitations and can be used to develop an understanding of the relationship between bulk materials properties and the localized mechanical properties of individual constituents. This paper focuses on the application of miniaturized fracture tests to determine the fracture properties of selected microstructural constituents with distinctive architectures. Site specific Focused Ion Beam (FIB) micro-machining was utilized to fabricate a sharply notched micro-cantilever, which was loaded by utilizing a nano-indenter with a large spherical tip. The fracture characteristics were assessed with a simplified plastic hinge model assisted with FE simulations.

Application of FIB/SEM/EBSD for Evaluation of Residual Strains and their relationship to Weld Metal Hydrogen Assisted Cold Cracking

Hydrogen assisted cold cracking (HACC) is a welding defect which may occur in the heat affected zone (HAZ) of the base metal or in the weld metal (WM). Initially the appearance of HACC was associated more closely with the HAZ of the base metal. However, recent developments in advanced steel processing have considerably improved the base material quality, thereby causing a shift of HACC to the WM itself. This represents a very serious problem for industry, because most of the predictive methods are intended for prevention of HACC in the HAZ of the base metal, not in the weld metal [1]. HACC in welded components is affected by three main interrelated factors, i.e. a microstructure, hydrogen concentration and stress level [2-4]. In general, residual stresses resulting from the welding process are unavoidable and their presence significantly influences the susceptibility of weld microstructures to cracking, particularly if hydrogen is introduced during welding [5]. Therefore various weldability tests have been developed over the years which are specifically designed to promote HACC by generating critical stress levels in the weld metal region due to special restraint conditions [4, 6-8]. These tests were used to develop predictive methods based on empirical criteria in order to estimate the cracking susceptibility of both the heat-affected zone and weld metal [4]. However, although the relationship between residual stress, hydrogen and HACC has received considerable attention, the interaction of residual stresses and microstructure in particular at microscopic scales is still not well understood [5, 9-21]. Therefore the current paper focuses on the development and assessment of techniques using Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM) and Electron Backscatter Diffraction for the determination of local residual strains at (sub) micron scales in E8010 weld metal, used for the root pass of X70 pipeline girth welds, and their relationship to the WM microstructure. The measurement of these strains could be used to evaluate the pre-existing stress magnitudes at certain microstructural features [22].