Wan Fadhilah Khalik

Optimization of degradation of Reactive Black 5 (RB5) and electricity generation in solar photocatalytic fuel cell system

The photocatalytic fuel cell (PFC) system was developed in order to study the effect of several operating parameters in degradation of Reactive Black 5 (RB5) and its electricity generation. Light irradiation, initial dye concentration, aeration, pH and cathode electrode are the operating parameters that might give contribution in the efficiency of PFC system. The degradation of RB5 depends on the presence of light irradiation and solar light gives better performance to degrade the azo dye. The azo dye with low initial concentration decolorizes faster compared to higher initial concentration and presence of aeration in PFC system would enhance its performance. Reactive Black 5 rapidly decreased at higher pH due to the higher amount of OH generated at higher pH and Pt-loaded carbon (Pt/C) was more suitable to be used as cathode in PFC system compared to Cu foil and Fe foil. The rapid decolorization of RB5 would increase their voltage output and in addition, it would also increase their Voc, Jsc and Pmax. The breakage of azo bond and aromatic rings was confirmed through UV-Vis spectrum and COD analysis.

Evaluation on the molecular structure of azo dye in photocatalytic mineralization under solar light irradiation

AbstractThe aim of this study was to investigate the effects of number of sulphonic groups on solar photocatalytic degradation of Acid Orange 7 (AO7), Orange G (OG), New Coccine (NC), Reactive Black 5 (RB5) and Reactive Green 19 (RG19) in aqueous solution. The data obtained for photocatalytic degradation of AO7, OG, NC, RB5 and RG19 were well fitted with the Langmuir–Hinshelwood kinetic model. The pseudo-first-order rate constant of RG19 with six sulphonic groups was the highest among the dyes in this study. Results showed that photocatalytic degradation rate of the azo dyes increased following the increase of the number of sulphonic groups of the dyes in the sequence of: AO7 < OG < NC < RB5 < RG19.

Reactive Black 5 as electron donor and/or electron acceptor in dual chamber of solar photocatalytic fuel cell

The role of azo dye Reactive Black 5 (RB5) as an electron donor and/or electron acceptor could be distinguished in dual chamber of photocatalytic fuel cell (PFC). The introduction of RB5 in anode chamber increased the voltage generation in the system since degradation of RB5 might produce electrons which also would transfer through external circuit to the cathode chamber. The removal efficiency of RB5 with open and closed circuit was 8.5% and 13.6%, respectively and removal efficiency for open circuit was low due to the fact that recombination of electron-hole pairs might happen in anode chamber since without connection to the cathode, electron cannot be transferred. The degradation of RB5 in cathode chamber with absence of oxygen showed that electrons from anode chamber was accepted by dye molecules to break its azo bond. The presence of oxygen in cathode chamber would improve the oxygen reduction rate which occurred at Platinum-loaded carbon (Pt/C) cathode electrode. The Voc, Jsc and Pmax for different condition of ultrapure water at cathode chamber also affected their fill factor. The transportation of protons to cathode chamber through Nafion membrane could decrease the pH of ultrapure water in cathode chamber and undergo hydrogen evolution reaction in the absence of oxygen which then increased degradation rate of RB5 as well as its electricity generation.

Comparison on solar photocatalytic degradation of orange g and new coccine using zinc oxide as catalyst

The mineralization of azo dyes could be realized through solar photocatalytic degradation that is a green method where non-harmful end products are produced. The aim of this study was to investigate the mineralization of Orange G (OG) and New Coccine (NC) using ZnO as catalyst. The degradation of the azo dyes was conducted at different experimental conditions, and parameters such as effect of sunlight to the degradation rate, initial azo dye concentration, amounts of catalyst dosage, pH and effect of aeration to the decolorization of azo dye were investigated. Photocatalytic mineralization of the azo dyes was evaluated through the analysis of UV-Vis spectra, chemical oxygen demand (COD) and ion chromatography (IC) for residual ionic species analysis. The results showed that solar photocatalytic degradation using ZnO was effective for colour removal and the photodegradation rate followed Langmuir-Hinshelwood kinetic model. It was observed that the degradation rate of NC was higher than OG which may be due to the different number of sulphonate ions that are attached on to the azo dye molecule.

Exploring the relationship between molecular structure of dyes and light sources for photodegradation and electricity generation in photocatalytic fuel cell

Reactive green 19, acid orange 7 and methylene blue are employed as the organic pollutants in this work. A photocatalytic fuel cell is constructed based on the idea of immobilizing zinc oxide onto zinc photoanode and platinum loaded carbon cathode, both evaluated under sunlight and ultraviolet irradiation, respectively. Influence of light and dye structures on the performance of photocatalytic fuel cell are examined. With reactive green 19, 93% and 86% of color removal are achieved after 8 h of photocatalytic fuel cell treatment under sunlight and ultraviolet irradiation, respectively. The decolorization rate of diazo reactive green 19 is higher than acid orange 7 (monoazo dye) when both dyes are treated by photocatalytic fuel cell under sunlight and ultraviolet irradiation, as the electron releasing groups (-NH-triazine) allow reactive green 19 easier to be oxidized. Comparatively, acid orange 7 is less favorable to be oxidized. The degradation of methylene blue is enhanced under sunlight irradiation due to the occurrence of self-sensitized photodegradation. When methylene blue is employed in the photocatalytic fuel cell under sunlight irradiation, the short circuit current (0.0129 mA cm-2) and maximum power density (0.0032 mW cm-2) of photocatalytic fuel cell greatly improved.

Integrated photocatalytic and sequencing batch reactor (SBR) treatment system for degradation of phenol

This study will examine the efficiency of the simultaneous photocatalytic and biodegradation process in the same treatment reactor. The sequencing batch reactor or also known as SBR is an effective wastewater treatment method that has been applied widely. SBR system has become an alternative method for industrial wastewater treatment with high concentration of chemical oxygen demand (COD), and phenolic compound. In order for the photocatalytic process to occur, ZnO nanoparticles immobilized onto sponge were introduced to the reactor. It was observed that the COD value were decreased, indicated that the simultaneous biodegradation and photodegradation process in functional. The effect of ZnO nanoparticles on the production and composition of extracellular polymeric substances (EPS) and the physiochemical stability of activated sludge in hybrid growth type SBR were monitored. The percentages of removal are varied with different concentration of ZnO nanoparticles. The highest COD removal recorded is 31.5% wi...

Comparison the performance of carbon plate and Pt-loaded carbon in photocatalytic fuel cell (PFC) process

The objective of this study is to compare the performance of cathode electrode in photocatalytic fuel cell (PFC) system under UV light irradiation. The initial concentration 10 mg/L of Reactive Black 5 (RB5) with carbon plate (CP) and Pt-loaded carbon (Pt/C) as cathode reduced to 2.052 and 0.549 mg/L, respectively, after 24 h irradiated by UV light. The value for open circuit voltage, Voc, short-circuit current density, Jsc and maximum power density, Pmax for CP was 0.825 V, 0.00035 mA/cm2 and 0.000063 mW/cm2, respectively, meanwhile Voc, Jsc and Pmax for Pt/C was 1.15 V, 0.0015 mA/cm2 and 0.000286 mW/cm2, respectively, by varying external resistor value from 300 kΩ to 10 Ω. The degradation of RB5 and generation of electricity with Pt/C as cathode showed greater performance than CP.