Wan-Shao Tsai

Refractive index profiling of an optical waveguide from the determination of the effective index with measured differential fields.

The evanescent tails of a guiding mode as well as its first and second derivatives were measured by a modified end-fire coupling method. The effective index of the waveguide can be obtained by simultaneously fitting these three fields using single parameter. Combined with an inverse calculation algorithm, the fields with fitted evanescent tails showed great improvement in the refractive index profiling of the optical waveguide, especially at the substrate region. Single-mode optical fibers and planar waveguides of proton-exchanged (PE) and titanium-indiffusion (Ti:LiNbO3) on lithium niobate substrates with different refractive index profiles were measured for the demonstration.

Increased detection sensitivity of surface plasmon sensors using oblique induced resonant coupling.

Increased detection sensitivity was achieved by adjusting the incident angle on periodic gold nanostructures that induced a resonant coupling between surface and substrate surface plasmon modes. For 500 nm-period gold nanoslits, a small incident angle, 7°, resulted in 2.64 times narrower linewidth and a 1.8 times increase in the figure of merit as compared to normal incidence. Furthermore, the intensity sensitivity was increased 4.5 times due to the change in the resonant coupling and redshift of the surface plasmon mode.

Enhancing detection sensitivity of metallic nanostructures by resonant coupling mode and spectral integration analysis

We report a simple method to efficiently improve the detection limit of surface plasmon resonance in periodic metallic nanostructures by using small angle illumination and spectral integration analysis. The large-area gold nanoslit arrays were fabricated by thermal-annealing template-stripping method with a slit width of 60 nm and period of 500 nm. The small angle illumination induced a resonant coupling between surface plasmon mode and substrate mode. It increased ~2.24 times intensity sensitivity at 5.5° incident angle. The small-angle illumination also resulted in multiple resonant peaks. The spectral integration method integrated all changes near the resonant peaks and increased the signal to noise ratio about 5 times as compared to single-wavelength intensity analysis. Combining both small angle and spectral integration, the detection limit was increased to one order of magnitude. The improvement of the detection limit for antigen-antibody interactions was demonstrated.

Determination of the effective index and thickness of biomolecular layer by Fano resonances in gold nanogrid array

We present an accurate method to determine the effective refractive index and thickness of biomolecular layer by using Fano resonance modes in dual-period gold nanogrid arrays. The effective refractive index changes along the x and y directions are simultaneously measured and obtained by using a modified dispersion relation. The thickness of the surface layer is calculated by a three-layer waveguide equation without any fitting parameters. The accuracy of the proposed method is verified by comparing the results with the known coated dielectric layer and self-assembly layers. The applications of this method and nanogrid chips for determining the thickness and surface concentration of antigen/antibody interactions are demonstrated.

Atomically smooth hybrid crystalline-core glass-clad fibers for low-loss broadband wave guiding.

We demonstrate direct evidence for the first realization of atomically smooth sapphire crystalline fiber cores with a surface variation of only ~1.9 Å. The hybrid glass-clad crystalline cores were grown by a laser-based fiber drawing technique. Because of the improvement in crystal fiber quality, we were able, for the first time, to comprehensively and quantitatively elucidate the correlation between fiber nanostructure and optical loss. We also experimentally demonstrated that high-temperature treatment has a significant impact on defect relaxation and promotes excellent crystallinity, and hence enables low-loss optical wave guiding. The experimentally measured propagation losses in the order of 0.01-0.1 dB/cm are the lowest ever reported among conventional Ti:sapphire channel waveguides and ultrafast-laser-inscribed waveguides, and agree well with the theory. Through experiments and numerical calculation, we have demonstrated that low threshold and high efficiency of Ti:sapphire crystal fiber lasers are possible with the atomic-level roughness, low-loss propagation, and high crystallinity of the Ti:sapphire crystalline core.

A compact imaging spectroscopic system for biomolecular detections on plasmonic chips

In this study, we demonstrate a compact imaging spectroscopic system for high-throughput detection of biomolecular interactions on plasmonic chips, based on a curved grating as the key element of light diffraction and light focusing. Both the curved grating and the plasmonic chips are fabricated on flexible plastic substrates using a gas-assisted thermal-embossing method. A fiber-coupled broadband light source and a camera are included in the system. Spectral resolution within 1 nm is achieved in sensing environmental index solutions and protein bindings. The detected sensitivities of the plasmonic chip are comparable with a commercial spectrometer. An extra one-dimensional scanning stage enables high-throughput detection of protein binding on a designed plasmonic chip consisting of several nanoslit arrays with different periods. The detected resonance wavelengths match well with the grating equation under an air environment. Wavelength shifts between 1 and 9 nm are detected for antigens of various concentrations binding with antibodies. A simple, mass-productive and cost-effective method has been demonstrated on the imaging spectroscopic system for real-time, label-free, highly sensitive and high-throughput screening of biomolecular interactions.

Ligand-Driven and Full-Color-Tunable Fiber Source: Toward Next-Generation Clinic Fiber-Endoscope Tomography with Cellular Resolution

In many biomedical applications, broad full-color emission is important, especially for wavelengths below 450 nm, which are difficult to cover via supercontinuum generation. Single-crystalline-core sapphires with defect-driven emissions have potential roles in the development of next-generation broadband light sources because their defect centers demonstrate multiple emission bands with tailored ligand fields. However, the inability to realize high quantum yields with high crystallinity by conventional methods hinders the applicability of ultra-broadband emissions. Here, we present how an effective one-step fiber-drawing process, followed by a simple and controllable thermal treatment, enables a low-loss, full-color, and crystal fiber-based generation with substantial color variability. The broad spectrum extends from 330 nm, which is over 50 nm further into the UV region than that in previously reported results. The predicted submicrometer spatial resolutions demonstrate that the defect–ligand fields are potentially beneficial for achieving in vivo cellular tomography. It is also noteworthy that the efficiency of the milliwatt-level full-color generation, with an optical-to-optical efficiency of nearly 5%, is the highest among that of the existing active waveguide schemes. In addition, direct evidence from high-resolution transmission electron microscopy together with electron energy loss spectroscopy and crystal-field ligands reveals an excellent crystalline core, atomically defined core/cladding interfacial roughness, and significant enhancements in new laser-induced electronic defect levels. Our work suggests an inexpensive, facile, and highly scalable route toward achieving cellular-resolution tomographic imaging and represents an important step in the development of endoscope-compatible diagnostic devices.

A portable grating-based spectrometer for plasmonic biosensing applications

A portable grating-based spectrometer for plasmonic biosensing is presented. Spectral resolution on the order of nm is achieved within wavelength range 628-640nm. The spectrometer shows good sensitivity response by testing the biosensor with glycerin solutions.

Simultaneous multi-optical parametric oscillations and broad up-conversion on χ (2) nonlinear photonic crystals

Parallel excitation of optical parametric oscillations was observed on PPLT dispersed with tri-QPM structures in the transverse direction to a nano-second pump beam. It led to simultaneous IR generation from 1000 to 1150nm with slope efficiency > 30%. When a nonlinearly-chirped PPLT was subject to such IR pump, it exhibits simultaneous broad green generation from 500 to 560nm with single pass efficiency ∼10%. This was due to broad spectral coverage of QPM-SHG and SFG in the chirp structures.

Comparison of transmission and reflection spectrum of angular dependent surface plasmon resonances of gold nanoslits

Angular dependent surface plasmon resonances of gold nanoslits with different grating periods were compared between their transmission and reflection spectra. Surface plasmon Bloch wave dominated the reflection mode and gap plasmon dominated the transmission measurement.